Used 2000 Saom T55 for sale (7,403)

Condition: used, Year of construction: 2000, total width: 1,500 mm, total height: 1,700 mm, Colour: Grey Dimensions (LxBxH): 450 x 150 x 170 cm Four-sided planer Weinig Profimat 26 S, 5head Year of construction 2000 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines1. Spindle - under 4 kW 2nd/3rd Spindle - left/right 11kW 4. Spindle - above 5.5kW 5. Spindle - under 4 kW Crjdpfx Aswnh Ekjaxsd Feed motor 3kW Main fuse 63 amp. Dimensions 4500 x 1500 x 1700 mm (L x W x H), weight 2500 kg - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: 89525 - Transport dimensions: 4500mm x 1500mm x 1700mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N Codpfjzhcfvox Aaxsrd feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Year of construction: 2009, condition: ready for operation (used), Coating line manufactured in 2009. This CEFLA EASY 2000 D features an infeed conveyor table with photocells, a dust removal brushing machine, and a spray booth with two automatic spray arms equipped with six spray guns each. It also includes a three-chamber drying oven and an air heat recovery unit. If you are looking to get high-quality coating capabilities, consider the CEFLA EASY 2000 D machine we have for sale. Contact us for further details. • Line components: • Infeed conveyor table with photocells • Dust removal brushing machine • Spray booth with two automatic spray arms (six spray guns per arm) • Steel belt conveyor for excess paint collection • Automatic transfer conveyor to the drying oven • Three-chamber drying oven • Outfeed conveyor from the oven Csdpfezhnfzex Aaxerd Additional equipment • Air heat recovery unit (recuperator) • Exhaust stack for volatile substances • Dust extraction system for the infeed table

Condition: good (used), Year of construction: 2017, load capacity: 2,000 kg, total height: 1,300 mm, total length: 2,000 mm, total width: 1,300 mm, table width: 1,200 mm, rotary table diameter: 1,200 mm, overall weight: 1,300 kg, table load: 2,000 kg, SWP PTA 2000 Welding Positioner / Manipulator Table Ø: 1200mm Table load on 400 mm:2000 Rotation table: 270° Table rotation: 0,13 - 2,6U/mm Table load:: 2000 Length: 2000mm Width: 1300mm Height: 1300mm Csdpszd T Tpofx Aaxerd Weight: 1300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: used, machine/vehicle number: 71257/1, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 Cedpfxezgt A Ns Aaxord - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

Condition: used, mileage: 238,855 km, first registration: 10/1999, tire size: 13r22.5, axle configuration: 4x2, wheelbase: 4,400 mm, brakes: engine braking, color: other, driver cabin: day cab, suspension: steel, total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 1998, Equipment: electric window regulation, trailer coupling, = Additional options and equipment = - Sun visor - Toolbox = Further information = Crsdpfx Ajzgmr Roaxed Tyre size: 13r22.5 Brakes: Drum brakes Suspension: Leaf suspension Front axle: Steered; Tyre tread left: 5 mm; Tyre tread right: 5 mm Rear axle: Twin tyres; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 14 mm; Tyre tread right outside: 14 mm; Reduction: Outer planetary axles Unladen weight: 10,380 kg Payload: 8,620 kg Gross vehicle weight: 19,000 kg Damages: none

Condition: good (used), Year of construction: 1998, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm CNC turning machine Loading magazine: LNS Tryton 112 MAIN SPINDLE Crodozhxk Ispfx Aaxed - Max. bar diameter: 10 [mm] - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2003, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1 x 2 m Cedpfx Aszhxkzsaxerd CNC turning machine Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,0 x 2 m CNC turning machine Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg Crsdozhxkuepfx Aaxsd

Condition: used, Year of construction: 2023, Lathes Cedpfx Ajy Nxc Ajaxord Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Condition: rarely used, like new

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 304 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B304 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Csdpfxezictpj Aaxord Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: good (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, control voltage: 24 V, Fat baking machine, Riehle Line 2000 Codpfsy H Urzsx Aaxord Tilting basket for a maximum of 36 pieces Lifting and lowering controlled by the system 1 proofing trolley with 10 aluminum tipping trays Baking process fully automatic Steam hood, electrically operated, proofing cabinet at the bottom Stainless steel construction Connection 400V, 16A CEE plug Used machine We have many more fat baking machines in stock!

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm Cedpfx Aoxm Sagoaxerd -Weight: 1850 kg

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, Stock number: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum platen distance: 900 mm Opening stroke: 500 mm Rotary table size D: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Cedpfozfkfljx Aaxsrd Dimensions & Weight Machine dimensions L x W x H: 4.11m x 2.65m x 4.81m Total weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 Handling interface EUROMAP 73 interface OPC interface

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Codpfezg Dbiex Aaxsrd Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Number of owners: 1 Technical condition: average Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Cjdpsvh H Dyefx Aaxjrd Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, GF AgieCharmilles FORM 2000 Year of manufacture: 2008 C-frame design, fixed table with lowerable container Travel ranges (X/Y/Z): 400 x 300 x 350 mm Table-to-spindle distance: 170-520 mm Max. workpiece size: L x W x H = 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U = 0-100 RPM) Pneumatic chuck (optional: Erowa/3R Systems) ISPG generator with 60 Amperes Best achievable surface roughness Ra 0.10 µm AGIEVISION 5 control panel 15” LCD color screen, mouse or touchscreen, jog shuttle and hand control Includes CAPA electrode changer - 40 electrode positions Credpfx Aaozh Emvsxsd - 4 pallet positions Net weight of the machine: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us after the order is received. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: excellent (used), Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. Crodpfx Aey D Sqvoaxjd It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is via the installed autosamplers. Continuous and automated operation is possible. Equipment and Design Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical Data Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Device Type: Elemental Analyzer Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial Numbers: 420126446 and 420126487 Dimensions Main Unit Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight Main Unit approx. 45 to 60 kg Autosampler each approx. 8 to 12 kg Total approx. 60 to 80 kg Condition Used, with signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of Delivery Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 2000, Saddle stitcher Müller Martini Prima Crjdpfovxf Sqsx Aaxsd Year: 2000 The PRIMA from Müller Martini is the ideal saddle stitcher for the versatile bookbindery, where the shortest changeover time are decisive. - Number of chain stations: 9 - Horizontal signature feeders: 7 x 370 - Cover feeder: 1529 - Excluding pump(s) Stitching unit Müller Martini 390 - Oblique sheet control - Thickness control - Stitching heads: 2x HK 75 - Reject gate, for incomplete products Trimmer Müller Martini 360 - Sets of knives: 2 Delivery Müller Martini 310 CS-14 - Compensating stacker Description modified on 29-5-2025!

Condition: used, Year of construction: 2000, Overview This filling monoblock was manufactured in 2000 by Germany MAG Schymanski. The machine is designed for the hot filling of juice and non-carbonated beverages. The system is equipped with 28 filling valves and 4 capping heads. The machine is already dismantled and stored. Technical data - Capacity: approx. 3,500 – 6,000 bottles/hour Crodpfx Aszd S Ixeaxod - Formats: 0.5 L / 0.7 L / 1.0 L / 1.5 L - Application: Hot filling of juice and non-carbonated beverages - Configuration: 28 filling valves / 4 capping heads

Year of construction: 2015, condition: used, Dimensions (LxW): 160 x 240 cm CO2 emission: 0 g/km Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Crodpfx Aajzgrxvexed

Year of construction: 2015, condition: used, machine/vehicle number: 592.032.054.0442, Travel ranges (X/Y/Z): 400x300x350 mm, 20-position tool changer, 3R system, weight: 3,830 kg. Credpjzhaz Uofx Aaxjd

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Csdpfxjy S Tm Uj Aaxsrd Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, Breadcrumb Crusher Hommel Rotormat 2000 Super Codpfey Hwc Aex Aaxord "the universal crusher" Stainless steel design High-performance Connection: 400V, 16A CEE plug Dimensions: 690 x 650 x 1550 mm (W x D x H) Used machine, cleaned Comes with warranty We have many other machines in stock!

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Cjdpszizkyefx Aaxjrd Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.