Used Weco Lathes for sale (5,383)

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Dwedpfx Ajy Nfqmsa Ioc Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1971, turning diameter over bed 400 mm turning diameter over slide rest 230 mm turning length 900 mm spindle bore 45 mm turning speeds 31,5-1000 U/min tailstock quill taper MT MK4 total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,1 x 1,4 x 1,8 m Centre lathe with Dwsdpfx Aez N Hv Tsa Iec - 2-axis digital readout - Forkardt 200 mm 3-jaw wedge-bar chuck - Multifix size B - Lighting

Condition: used, Max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, manufacturer: SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest, and Multifix steel tool holder. Dsdez Nhrcjpfx Aa Iowc

Condition: used, Year of construction: 1981, total length: 3,300 mm, total width: 1,100 mm, total height: 1,250 mm, Colour: Grey Empty weight: 2.500 kg Dwjdsz Enywopfx Aa Isc - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 14946 - Drive system: Conventional - Power [kW]: 7.5 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 312 - Distance between centres [mm]: 1600 - Bed width [mm]: 385 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 3300mm x 1100mm x 1250mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1992, machine/vehicle number: 5075, This Weiler lathe, type: L2 PRIMUS GS, will be auctioned online as part of our industrial auction/machine auction, which includes the liquidation of Trola GmbH’s assets: machinery, workshop equipment, plastic parts, and material handling equipment. You can find this and many other items on our platform. Dwjdjz Nc H Topfx Aa Ijc

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Hardinge lathe 3 axes: X, Z, C Model: Conquest T42 C CNC: GE Fanuc Series 18-T Bar feeder: LNS 3M Documentation available Video available Inspection possible Dwodpfxjz I Tgbs Aa Ioc

Condition: used, Binns & Berry Trident E1000 Double Gap Bed Centre Lathe With Digital Readout System. Distance Between Centres 4500mm Swing Over Bed 1000mm. Swing in Gap 1500mm. Dwedpfx Aajzy Il Ej Ioc Width of Gap 350mm. Spindle Bore 100mm. Spindle Speeds 4 - 1250rpm. Leadscrew 2 TPI. Dual Dials. Power to Saddle & Cross Slide. Bison 625mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Weight Approx: 9000KG

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Dedpfxjzfwm Ns Aa Ijwc Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment via fine-threaded spindles, adjustable from the front and rear. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid Four-jaw steady rest Four-jaw chuck 125mm Copying tools, center punches, hexagonal drive dogs, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. The machine was obviously not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Distance Between Centres 4000mm (157"). Dodpfozy Im Njx Aa Iowc Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Weight Approx: 6000KG

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. Djdpfx Aaez Hifdo Iowc From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: P1600223, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,750 mm, total length: 2,000 mm, total width: 1,400 mm, overall weight: 2,500 kg, spindle nose: A2-5, bar diameter (max.): 25 mm, power: 7.5 kW (10.20 HP), workpiece length (max.): 220 mm, number of slots in tool magazine: 7, Equipment: documentation/manual, DAEWOO PUMA 160 CNC lathe - Turning diameter over bed: 545 mm - Recommended machining diameter: 170 mm - Spindle chuck diameter: 169 mm - Cutting feed rate X, Z: 0.001 - 500,000 mm/rev - With technical documentation and accessories such as tool holders, a 2-jaw chuck, and a 3-jaw chuck, including SCHUNK jaws, diameter: 165 mm FCA D-97711 Maßbach – loaded onto a truck. Dwodpfx Aasz I Np So Ioc

Condition: good (used), Year of construction: 1995, functionality: fully functional, Schaublin 125-CCN High-precision lathe with numerical control FANUC 20-T. A LARGE AMOUNT of accessories included. CE compliant!!!! Technical data: >> Machine no. 334949, year of manufacture 1995 Working area: Dwsdpez Ezc Eofx Aa Ioc Permissible diameter: over the carriage 270 mm over the slide 115 mm in the spindle bore 28 mm largest chuck 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X/Z axis, stepless 0-5000 mm/min Rapid traverse X/Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with numerical control FANUC 20-T. The machine was manufactured in 1995 and comes with a large amount of accessories. Take advantage of the opportunity to inspect this machine on site while it is powered up and to verify its condition.

Condition: used, Broadbent - Schofield Gap Bed Centre Lathe. Distance Between Centres Approx 5M (16ft). Swing Over Bed 35". Swing in Gap 55". Spindle Bore 4 1/2". Spindle Speeds 7 - 500rpm. Leadscrew 2 TPI. Dwjdpfx Aozy Ipqoa Ijc Taper Turning Attachment. Bison 800mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Digital Readout & Tooling & 2 Rear Splash Guards.

Condition: used, total length: 3,700 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 2000 - Bed width [mm]: 385 - Spindle bore [mm]: 73 - Min. spindle speed [rpm]: 26 Dodpfx Aajz Et Uas Iewc - Max. spindle speed [rpm]: 1100 - Options: Fixed steady, Removable bed, Three-jaw chuck, Travelling steady - Swing over removable bed [mm]: 750 - Transport dimensions: 3700mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2954, turning length: 100 mm, spindle speed (max.): 4,000 rpm, total height: 1,900 mm, total length: 4,800 mm, total width: 1,800 mm, overall weight: 3,600 kg, bar passage: 42 mm, number of driven tool stations in tool turret 1: 2, Equipment: documentation/manual, MÜGA GT 542 M CNC turning machine - Number of NC axes: 5 - Swing diameter: max. 700 mm - Rapid traverse rate: 17.5 m/min - Spindle power: 7.5 kW - Collet chuck: ISO DIN 173E - Tool holder, square: 20 x 20 mm, round: 20/25 mm - C-axis resolution: 0.1° - Tool positions: 14 external, main spindle: 5, internal: 3 + 4 Dwjdpfx Asz I I Umsa Iec - Driven tool positions: 2 - Simultaneous machining on the inside and outside - With technical documentation - With accessories such as various clamping jaws, holders, square turning tools, indexable inserts, etc. - With bar guide, length approx.: 2200 mm - Dimensions of the machine body: 2600 x 1800 x 1900 mm FCA-D 97711 gauge block – loaded onto a truck.

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 24 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Dedpfxezzwgne Aa Ijwc Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: good (used), functionality: fully functional, Internal article number: 26061 Lead and drive spindle lathe Leinen DLZ 140 + Collet set + Multifix "A" base holder + 3-jaw chuck Röhm 125 + 4-jaw chuck Röhm 125 + 4-jaw chuck Röhm 160 + Lynette Center height: 140mm Distance between centers: 500mm Spindle speed: 15 - 3100 rpm Dsdpjz Hapgefx Aa Iswc The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 square meters.

Condition: ready for operation (used), Year of construction: 1971, Center lathe, manufactured by VOEST ALPINE, type DA 210, year of manufacture 1971. Chuck: 315 mm, tool holder: Multifix B with 2 tool pockets. Center height: 210 mm Distance between centers: 1000 mm Spindle bore: 46 mm Spindle speeds: 28 - 2000 rpm Dwsdpfx Aaez Eilnj Isc Further details can be found in the data sheet. Machine in good, ready-to-use condition. Machine documentation available. Weight: approx. 1200 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 411 h, functionality: fully functional, chuck outer diameter: 1,200 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 2 rpm, turning diameter: 1,600 mm, Massa Heavy Duty Precision CNC Vertical Borer Model: VL-1200 ATC + C Control: Fanuc 18i TB Year: 2008 Max Swing Dia:1600mm Max Turning Dia: 1350mm Max Turning Height: 1250mm 4 Jaw Scroll Chuck Dia: 1200mm Table Speeds: 2-300 RPM 16 Station Tool Changer ‘C’ Axis 360 Degrees ‘C’ Axis Milling Spindle BT 50 Dodpfszv T A Iex Aa Iswc Dimensions: 6300 x 4500 x 5800mm Weight: 33,000 KGS

Condition: used, Year of construction: 2016, control SIEMENS Sinumerik 828D centre distance ca. 450 mm x-axis ca. 240 mm z-axis ca. 540 mm spindle tunring speed 4.500 U/min number of tool places 12 Pos. weight ca. 5.300 kg Condition: Used Technical features & accessories: - AFS 600 filtration system - SUN KOREA SL2300 chip conveyor Dodpfx Aoz Nqbaea Ijwc - 12-station star-type turret for driven tools Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Dedpfxszd Uv Ee Aa Iewc Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor Dodpfxsxc In Ss Aa Iowc 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: good (used), Year of construction: 1975, turning length 1000 mm turning diameter over bed 430 mm turning diameter over slide rest 235 mm spindle turning speed range 11.2 - 2.000 U/min spindle bore 56.0 mm morse taper 4 MK quill stroke 135 mm bed width 333 mm spindle taper DIN 55022 Gr. 6 total power requirement 7.75 kW weight of the machine ca. 1950 kg From a maintenance workshop Good condition (!!) Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - "RSF Elektronik" digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - "FINN SAFETY" foldable chuck guard Type SPS 400 Dsdpfx Aaoz I Ucko Iswc - Sliding tailstock * Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. Dodpfx Aasztwwke Iewc FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm Dodpfx Aaszy Ik Is Ijwc With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.