Used Stahl Folding Machine - 16 Pages Corss Fold for sale (74,031)

Year of construction: 2004, condition: ready for operation (used), Infeed width: 660mm, equipment: pallet feeder PD-66-T, Tremat sheet separation system, six folding plates in the parallel folding section, downstream knife shaft, two folding knives in the cross-fold section, one additional folding plate after the 1st cross fold and pressing station with standing sheet delivery SB-46/MP.D. The system is technically without problems, rollers need to be replaced. An on-site inspection is possible. Hsdpey Ull Iofx Ad Ron

Condition: ready for operation (used), Year of construction: 2008, - Underfloor suction feeder Hedey Rrxaopfx Ad Ren - Maximum feed width: 36 cm - GUK MCS-106 batch counter - 4 parallel folding pockets - Belt delivery

Condition: new, Year of construction: 2022, sheet width 2065 mm plate thickness 1.20 mm daylight opening 30.0 mm bending angle max. 0 - 135 ° Hjdpfx Adjxaat Is Rsn total power requirement manuell weight of the machine ca. 500 kg dimensions of the machine ca. 2400 x 1115 x 1500 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table Hjdpfsmck Ryox Ad Rsn - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: excellent (used), Year of construction: 2011, Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg. Hodpfxolnixij Ad Rsn

Condition: good (used), functionality: fully functional, Year of construction: 2007, Max. machining length: 3000 mm Max. material thickness for iron: 2 mm Hsdpfx Aoy Rhtgjd Rjn

Condition: used, Year of construction: 2003, Format: 520 mm Equipment: Flat stack investors Station 1: 4 Bags Station 2: 4 Bags Hedey T Rbrspfx Ad Rsn

Condition: used, Year of construction: 2021, sheet width 2020 mm plate thickness 1,5 mm 135 ° 100 mm total power requirement 1 kW weight of the machine ca. 965 kg dimensions of the machine ca. 2680 x 640 x 1100 mm NEW PRICE: 9,990 EURO Description: - Foot operation enables positioning of the sheet metal with both hands - Workpiece clamping and bending process are motorized via a chain drive - Manual adjustment of the bending angle, reading of the angle on a scale ring - Many bending options with segmented upper beam - Precise movement of the bending beam via large flat guides - Heavy, robust welded construction Hodey Erw Eepfx Ad Ron

Condition: used, Year of construction: 1993, Format: Maximum sheet width 660 mm, maximum length 300 mm. Minimum sheet size: 120 x 100 mm. Product thickness: Maximum 4 mm. Pile height: Maximum 80 cm. Hjdpfoy N Uxmjx Ad Rsn Pressing force: 8,000 N Infeed height: Adjustable from 360 mm to 960 mm.

Condition: used, Year of construction: 2010, Bundle delivery system Palamides alpha 700 Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Hjdpjy N Up Esfx Ad Rsn Automatic format adjustment in running direction

Condition: used, Year of construction: 2007, Bundle delivery system Palamides alpha 700 Hodsy N Un Ujpfx Ad Ren Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Automatic format adjustment in running direction

Condition: used, Year of construction: 1980, infeed height: 350 mm, Equipment: compressor, 2 pockets Hjdoy N Ukvjpfx Ad Ren Compressor

Condition: used, Year of construction: 2000, 4 pockets Compressor Paper counting unit Hsdpfx Adjy N Dkro Rsn

Condition: used, Year of construction: 1991, Equipment: compressor, 6 pockets 2 cross folds Delivery Press delivery SBP 46 Hedoy N Az Ajpfx Ad Ron

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Hedpfx Adey Tn N Hj Rsn

Condition: new, - Working width 1020 mm Hodpfxecca Rge Ad Rjn - Max. sheet thickness approx. 2,5 mm (St 40) - Max. Bending angle 135 Accessories: - segmented upper beam - Foot pedal for tensioning - instruction manual

Condition: used, Year of construction: 2021, functionality: fully functional, STC-Ref:G-571-0053 Palamides Gamma 502-HO, Year: 2021 Hjdpfx Ajy R A Eqed Rsn format: 510 x 240 mm equipped: - Dual-purpose cutting device - delivery with banding - pile height max. 12 cm - pile height min. 2 cm - speed 600 pck/hr per nutzen max. - paper size max. 51 x 24 cm - paper size min. 10,5 x 9,5 cm

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine Hodpjyuybpsfx Ad Rjn This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Folding unit: 210 mm feed width Output up to 300 sheets/min Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Manufacturer: GUK Year of manufacture: 2017 Space requirement: 130 x 70 x 80 cm

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Hedpfjy Tacrex Ad Rsn Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: used, Eurofold Folding Machine Features: Space-saving machine on wheels, suction feeder – A3 format, 2 folding pockets (single fold, accordion, roll fold). Adjustment screen with counter. Air pump 40 m³/h, 230V power supply. Technical data: Maximum paper size: 350 x 500 mm Minimum paper size: 90 x 120 mm Paper weight: 40 to 240 g/m² Fold length – pocket 1: min. 4 cm / max. 42.3 cm Fold length – pocket 2: min. 4 cm / max. 22.8 cm Folding speed: up to 30,000 A4/hour Refurbished used machine: Cylinders and bearings Pump overhauled Filters and vanes Hodpfx Aey Stkaod Rsn

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, Semi-automatic can seamer for round cans. Stainless steel version. Can diameter: 42–163 mm, height: 26–300 mm, material thickness: 0.35 mm. Currently equipped for 99 mm. Hedpfsxn Nqljx Ad Rjn

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53600 € 1013.04 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Hedpfswiq E Nsx Ad Ron Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57100 € 1079.19 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch Hodpfewiq A Ijx Ad Ron 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: used, Year of construction: 1982, sheet width 3100 mm plate thickness 2 mm 90 mm adjustable bending rolls 90 mm Hedpfjyv I T Dsx Ad Ren weight of the machine ca. 4000 kg

Condition: ready for operation (used), Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h voltage 400 V total power requirement 2x 4.0 kW weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right Hjdpjxabz Tsfx Ad Rsn * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram