Used Schröder Low Loader Semitrailer for sale (15,251)

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually Lrjdpfx Ajxarmasbyou * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly Lsdpfx Abez Ivnusyjru * Floor covering: sheet metal * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) * 4 pairs of el

Condition: used, maximum load weight: 37,530 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 11/2026, total width: 3,000 mm, total height: 3,780 mm, Equipment: ABS, * Gooseneck with side rails (foldable) * Low-bed length: 11950 mm - 15450 mm * Low-bed extendable in stages by 3500 mm Ledpfxsy T Dyzo Abyeru * Low-bed width adjustable by 460 mm * Hydraulically adjustable loading ramps (2-part) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd and 4th axles with trailing steering * Chocks ----* Tire size: 235/75R17.5 * Technical total weight: 58000 kg * Tare weight: 12470 kg * Overall length: 13700-17200 mm * Overall width: 2540-3000 mm * Next inspection due: 05.2026 ----Vehicle number: 12062----Errors and prior sale excepted.----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * Inspection (HU/SP) * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport ----Your VTS Team

Condition: used, empty load weight: 9,290 kg, maximum load weight: 32,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2017, next inspection (TÜV): 07/2027, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses, lashing eyes, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Lrjdpfx As Aa Rcdobyju

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Ledjz S Ikkspfx Abyjru

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors! Ledpfsxwa Uyox Abysru

Condition: used, maximum load weight: 23,900 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2007, Year of construction: 2007, Internal vehicle number: G400178 Available immediately at our yard in Kaufungen More information: Luis Lucena Viktoria Sologubova Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 axles – hydraulic ramps Robust Müller-Mitteltal TS2 KOMPAKT low-loader trailer from 2007. This 2-axle trailer features hydraulic loading ramps, air suspension, and a payload capacity of 23,900 kg. With a permissible gross weight of 31,000 kg, it is ideally suited for transporting heavy construction and industrial machinery. Technical data: * Vehicle number: G400178 * Vehicle condition: Used * Category: Low-loader trailer * Manufacturer: Müller-Mitteltal * Model: TS2 KOMPAKT * First registration: 06/2007 * Year of manufacture: 2007 * Axles: 2 * Permissible gross weight: 31,000 kg * Unladen weight: 7,100 kg * Payload: 23,900 kg * Overall length: 10,800 mm * German vehicle Equipment: * Hydraulic loading ramps * Air suspension * 2-axle chassis * Robust low-loader design Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We will gladly accept your used vehicle as part of the payment. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH Ledezahg Dopfx Abyeru We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 38,170 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,085 mm, loading space width: 2,550 mm, total length: 13,300 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2015, Equipment: ABS, ES-GE 3-Axle Lowboy Semi-Trailer | Extendable | Wheel Recesses | Aluminum Ramps | Lift/Steering Axle Description: For sale is a high-quality and extremely versatile ES-GE 3-axle lowboy semi-trailer from the initial registration year. The vehicle stands out due to its extensive special equipment, which enables maximum flexibility in the transport of heavy construction machinery, wheel loaders, excavators, and containers. Thanks to the extendable loading platform and the integrated wheel and excavator recesses, the semi-trailer is equipped for virtually any challenge. Vehicle Data & Weights: First Registration: 08/21/2015 * Permissible Total Weight: 48,000 kg * Axle Load: 30,000 kg (3 x 10,000 kg) * Fifth Wheel Load: 18,000 kg * Fifth Wheel Height: 0.95m Dimensions & Chassis: Overall Length: approx. 13,085 mm (extendable by max. approx. 4,060 mm) * Loading Platform Length / Height: approx. 8,750 mm / approx. 860 mm (loaded) * Width: approx. 2,550 mm (extendable by means of galvanized brackets to approx. 3,000 mm) * Chassis: High-strength fine-grained steel (suitable for point load 30 t on 4 m) * Floor: Robust hardwood floor (approx. 38 mm), checkered plate covering above the axle assembly * Paintwork: Solid color in RAL 5010 Blue, rims in silver Suspension & Axles: Axles: 3 x 10,500 kg Gigant axles, air-suspended with lifting and lowering function Lodpfx Aoz Edhqobysru * 1st Axle: Designed as a lift axle * 3rd Axle: Designed as a trailing steering axle * Braking System: Two-line braking system (ABS-EBS), Knorr brake TIMG2 (Smart-Board) * Tires: 12-ply, 235/75 R 17.5 * Tire Tread Depth: 1=80% 2=60-80% 3=30-60% Special Equipment & Highlights: Ramps: 1 pair of 2-piece aluminum ramps (approx. 2,900 + 1,450 x 600 mm), hydraulically liftable and lowerable, mechanically movable (load capacity approx. 15,000 kg/piece) * Wheel Recesses: 2 pairs of wheel recesses in the lowbed including matching aluminum covers * Excavator Recess: Integrated excavator recess at the rear between the axles (approx. 650 x 2,000 x 300 mm) * Container Locking: 2 pairs in the loading platform (for 2x 20' and 1x 40' containers), 1 pair on the gooseneck, and 1 support leg for the front wheel recess * Weight Optimization: Front supports and air tank made of lightweight aluminum instead of steel * Load Securing: 9 pairs of stake pockets in the outer frame, 1 row of stake pockets transversely on the gooseneck, numerous swivel lashing points (6 t WLL / 12 t LC) * Lighting & Safety: LED taillights, LED side marker lights, 2 LED reversing lights, 4 retractable LED widening lights (up to approx. 4,500 mm width) incl. night parking signs * Corrosion Protection: High-quality treatment with zinc dust primer (90%) according to DIN/ISO 12944 * Pneumatics: Couplings in comfortable "DUOMATIC" design The vehicle is in an operational condition. Sale is from the location. For further questions, detailed pictures or to arrange a viewing appointment, please do not hesitate to contact us! New main inspections / safety checks or weight reductions/increases are possible upon request. We will be happy to assist you in obtaining export/transfer license plates; a transfer of your purchased vehicles within the Federal Republic is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Than

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m Lsdpswxm Ilefx Abyeru * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Ljdoz N Nwyopfx Abyeru Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear Lodpfx Aog Sk T Djbyeru of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle Lrodozzhfnjpfx Abysu * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: used, empty load weight: 14,200 kg, maximum load weight: 33,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 9,600 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 235/75 R 17,5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 3 axles, BPW axles, air suspension, forced steering on axles 2 and 3, ABS (anti-lock braking system), lashing points, two-part loading ramps, hydraulic ramps, rear supports. Body: Doll 3-axle low-bed semi-trailer with wheel recesses (450 mm height), axles 2 and 3 hydraulically steered, remote control, axle load adjustment mounted on the first axle, reversing camera, low-bed length 5,500 mm, loading height 850 mm, low-bed depth 600 mm, wheel recesses 450 mm, hot-dip galvanizing, hydraulic lateral movement of the ramps (length 4,800 mm), remote control (steering functions), wheel recesses for wheelbases of 3,300 - 3,800 mm, excavator recess/crane clearance approximately 3,500 mm long with 3 pairs of pivoting lashing eyes, each rated at 10,000 daN, 2 pairs of lashing eyes, 5,000 daN, embedded in the outer frame of the rear chassis platform, 6 pairs of pivoting lashing eyes, 10,000 daN, installed in the outer frame of the low-bed platform (2 pairs in the outer frame of the chassis platform, and 4 pairs in the outer frame of the detachable driving surface of the low-bed platform). 1 pair of pivoting lashing eyes, 13,400 daN, installed next to the central box frame on the left/right side in front of the first axle (in front of the detachable driving surface), 1 pair of pivoting lashing eyes, 10,000 daN, in the front fixed support, welded into the open outer frame, 1 pair of pivoting lashing eyes, 13,400 daN, welded into the curvature to the low-bed on the main frame, 3 m spread, factory equipment. Data subject to change, subject to availability, as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lrsdpfx Aozhalyobyeu

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Lsdpfx Aex Dzn Ujbysru

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm Lrjdpfx Asw Tgp Debyeu * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2015, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Technical Overview: Chassis: 2 axles, steered, TRIDEC steering system (mechanical, without electronics) * Gross vehicle weight: 30 t (12 t fifth wheel load + 18 t axles) * Tyres: 4× Goodyear 385/65 R22.5 * External dimensions: 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: 13.59 × 2.5 × 1.82 m * Lower deck internal dimensions: 9.94 × 2.5 × 1.82 m * Lower deck floor height from ground: 320 mm * Axle spacing: 1,400 mm --- Body & Materials: * Plywood side walls/front: 21/24 mm, white polyester-coated * 30 mm insulated polyester roof with rainwater management * Anti-slip aluminium floors (grey) * Stainless steel front and corner profiles * Hot-dip galvanised chassis to ZINQ standard Lrjdpfx Abjyvmv Rsysu --- Safety & Handling: * WABCO air brake system, drum brakes, ABS/EBS-E with ECAS * Indicator lights (ABS/EBS/ECAS) clearly visible * WABCO SmartBoard: Weight display, odometer, adjustable loading height --- Comfort & Operation: * 3 large side flaps (battery, lift/SmartBoard, technical equipment) * Multi-deck lift Dhollandia, 2,500 kg capacity, LED platform, foldable railings/ramps * Lift controls: externally on the right, integrated in the guard rail --- Electrics & Lighting: * Full LED interior and exterior lighting, LED work lights/platform * 2× 230 Ah batteries, charged via tractor unit * Master switch located behind the side flap, linked with lift controls --- Finish & Advertising: * Exterior colour: RAL 9005 * Reflectors: 3M * Optional: advertising space available --- Key Advantages: * Replaces up to 3 standard trailers with 2 double decks * Customisable: axles, dimensions, cooling options selectable * Suitable for long-haul and distribution transport

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 78,380 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 06/2023, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt of the equipment, complete equipment list available upon request. Equipment: * 2-inch kingpin * 12 t Broshuis SL axles * Extendable width extensions * 4 pairs of lashing points on the central beam, 10,000 daN * 1 pair in the fixed section in front of the telescoping section * 3 pairs behind the telescoping section * 9 pairs of lashing points in the outer frame, 10,000 daN * Holes in the outer frame for attaching lashing straps * Jost 2-speed geared support winch * 4 extendable, illuminated width extension panels * 3 plug-in side panels on the gooseneck (length approx. 2,400 mm) * Rear corner posts, plug-in/removable * 4 sets of shims with holders under the loading platform at the support legs * 1 pair of lashing points in the outer frame of the gooseneck, 10,000 daN * 3 pairs of lashing points in the outer frame of the gooseneck, 5,000 daN * NATO socket - NATO spiral cable - 2 x 7-pole electrical system * 1 x 7-pole EBS - 1 socket at the front and rear for auxiliary steering * 1 storage box on the gooseneck, spanning the entire width, with angled corners (45°) * Opening from above - doors in the corners can be locked (not continuous to the storage box in the middle) * 6 sets of plug-in uprights, approx. 1,200 mm high, incl. holder on the gooseneck * WADER container pockets for 1 x 20 ft and 1 x 40 ft - Brake connections, red/yellow - EBS WABCO * Rear support, telescoping * 2 LED reversing lights at the rear * LED lighting (DK round) * 1 LED rotating beacon * 8 pairs of upright pockets in the outer frame of the loading platform * 3 pairs of upright pockets in the outer frame of the gooseneck * Contour marking, yellow on the sides / red at the rear Lrsdoz Ifk Espfx Abysu * Adjustable attachment rails for loading ramps * 3 LED flashing beacons at the rear of the vehicle * RAL 3002 carmine red * 2 ECE plates at the rear

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2015, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Technical Overview: Chassis: 2 axles, steered, TRIDEC steering system (mechanical, without electronics) * Gross vehicle weight: 30 t (12 t fifth wheel load + 18 t axles) * Tyres: 4× Goodyear 385/65 R22.5 * External dimensions: 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: 13.59 × 2.5 × 1.82 m * Lower deck internal dimensions: 9.94 × 2.5 × 1.82 m * Lower deck floor height from ground: 320 mm * Axle spacing: 1,400 mm --- Body & Materials: * Plywood side walls/front: 21/24 mm, white polyester-coated * 30 mm insulated polyester roof with rainwater management * Anti-slip aluminium floors (grey) * Stainless steel front and corner profiles * Hot-dip galvanised chassis to ZINQ standard --- Safety & Handling: Lsdpeyb U Iksfx Abyeru * WABCO air brake system, drum brakes, ABS/EBS-E with ECAS * Indicator lights (ABS/EBS/ECAS) clearly visible * WABCO SmartBoard: Weight display, odometer, adjustable loading height --- Comfort & Operation: * 3 large side flaps (battery, lift/SmartBoard, technical equipment) * Multi-deck lift Dhollandia, 2,500 kg capacity, LED platform, foldable railings/ramps * Lift controls: externally on the right, integrated in the guard rail --- Electrics & Lighting: * Full LED interior and exterior lighting, LED work lights/platform * 2× 230 Ah batteries, charged via tractor unit * Master switch located behind the side flap, linked with lift controls --- Finish & Advertising: * Exterior colour: RAL 9005 * Reflectors: 3M * Optional: advertising space available --- Key Advantages: * Replaces up to 3 standard trailers with 2 double decks * Customisable: axles, dimensions, cooling options selectable * Suitable for long-haul and distribution transport

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. Lredpfxsxxkqzs Abyou - .

Condition: new, Year of construction: 2026, Equipment: ABS, 5 Axle Lowbed Lredpsrlm Txefx Abysu Please get contact with us for more informaiton;

Condition: new, overall weight: 36,000 kg, loading space length: 13,300 mm, loading space width: 1,640 mm, loading space height: 3,770 mm, Year of construction: 2026, Equipment: ABS, Special vehicle for forklift transport. In-loader / intermediate loader for max. internal height of approx. 3,770 mm Offer price without optional equipment. Available equipment: Ljdpfx Aevw Hm Tebyoru Rear with loading lift / elevator suitable for loading and unloading on ramps. The vehicle is currently being manufactured and has a delivery time. On request, we will be happy to make you an offer with the desired equipment. For more information, please visit: or call us.

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Ljdpfovw Hmtsx Abyjru Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Lodjzlmkwepfx Abyjru Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: Lodpjwmh H Eefx Abysru * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us