Used Rollmak Bm 125 for sale (4,982)

Condition: used, functionality: fully functional, We are selling this machine. Itsdpfx Akjydqfdspsn It is connected and can be tested. A video of the machine can be sent via the WhatsApp application. Documentation for the machine is available. Speeds: 1st range: 0.35-3.5 rpm 2nd range: 1.4-14 rpm Drive: 2 regulating motors, each with 120 kW, powered by a 240 kW Ward-Leonard converter. Diameter of the clamping plate: 8,000 mm Largest turning diameter: 12,500 mm Turning height: 2,200 mm The machine underwent a major overhaul and modernization in 1991. Maximum workpiece weight: 200,000 kg Machine weight: 550,000 kg Please submit your offer.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 50-125/302 G4 centrifugal pump with a KSB electric motor. The pump is a warehouse stock item – it has never been used in an installation. It comes from older warehouse stock, so there may be minor marks on the housing resulting solely from long-term storage. The pump is offered with the original KSB carton and documentation as shown in the photos. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 50-125/302 G4 Identification number: 48817003 VC-No.: 5-927-123534 / 001 Flow rate Q: 20–80 m³/h Head H: 16–10 m Rotational speed: 2900 rpm Year of manufacture: 1995 Net weight: approx. 51 kg Gross weight: approx. 55 kg Motor data: Manufacturer: KSB Type: LS100L Power: 3.0 kW at 50 Hz Rotational speed: 2840–2870 rpm at 50 Hz Voltage: 380 / 420 / 660 V – as per the nameplate Protection class: IP55 Insulation class: F Operating mode: S1 Motor number: 149610EL022 Condition: Iedpfx Aksz Sn Icopotn NEW / UNUSED – WAREHOUSE STOCK ITEM. The pump has not been used. Any minor marks on the surface are due to storage and the age of the device. The scope of sale is exactly as shown in the photos – pump with motor, original KSB packaging, and available documentation.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 184 kg, total length: 1,100 mm, total width: 400 mm, total height: 660 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 42 A, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, protection type (IP code): IP55, KSB Pump ETABLOC ETB 125-100-315 GGsAV66D301854B PD2M Single-stage, volute casing pump in block design with a motor-integrated frequency converter. Year of manufacture 2021 (operated for only 1 year; a higher flow rate was required, which is why the pumps were replaced). Itjdpoz I R Rkefx Akpen Equipped with a PumpDrive 2/PumpDrive 2 Eco frequency converter. Self-cooled frequency converter with a modular design, enabling stepless speed control of asynchronous and synchronous reluctance motors via analog standard signals, fieldbus, or control unit. Four pumps are available for sale. Individual sale is possible. The price is per pump. Supply voltage: 400 V Power: 18.5 kW Current consumption: 42.0 A Pump speed: 1500 rpm Medium: Ethylene glycol-based antifreeze, inhibited, closed system, e.g., Antifrogen N or comparable products. Main pump connections: Suction nozzle DN 125 / PN16 Discharge nozzle DN 100 / PN16

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,592 h, power: 58 kW (78.86 HP), lifting height: 40,150 mm, fuel type: diesel, Equipment: all wheel drive, GENIE S-125 telescopic boom lift with a working height of 40.15 meters! Year of manufacture: 2011 According to the meter reading: 5,592 hours 🏗️ Performance data & working range • Max. working height: 40.15 m • Max. platform height: 38.15 m • Max. lateral reach: 24.38 m • Max. reach below ground level: 3.27 m • Platform load capacity: 227 kg (unrestricted) • Turret rotation: 360° continuous • Length of the boom (Jib): approx. 1.52 m 📐 Dimensions & weight • Operating weight: approx. 20,248 kg • Transport length: approx. 12.19 m (with retracted boom for transport) • Transport width (axles retracted): approx. 2.49 m • Working width (axles extended): approx. 3.35 m • Transport height: approx. 3.07 m • Platform size: 2.44 m x 0.91 m ⚙️ Drive & chassis • Engine options (diesel): Deutz TD 2011 L04i (74 hp / 55 kW) or Perkins 804D-33T (83 hp / 62 kW) • Fuel tank capacity: 151 liters • Hydraulic oil tank capacity: 208 liters • Drive / steering: 4WD (all-wheel drive) & 4WS (all-wheel steering with crab steering) • Gradeability: 40% • Tires: Foam-filled rough terrain tires - Ready for immediate use in original condition! - Good tires! - Well-maintained machine! - Includes CE certification! - On request: new Austrian inspection certificate provided before delivery! Selling price: 28,900.00 EUR net Iedpfxsz Ndyce Akpstn Delivery possible!

Condition: good (used), Year of construction: 2000, input voltage: 380 V, type of input current: three-phase, pressing force: 125 t, stroke length: 400 mm, total length: 4,000 mm, total width: 2,175 mm, total height: 3,500 mm, overall weight: 15,000 kg, Brand: Amada - Schiavi Model: NMP 125/3 Serial number: 005-8250 Year: 2000 Weight: 15,000 kg Motor: 9 kW Axes: Y1, Y2, X, R, Z1, Z2, Z3 Ijdpfx Akoz Dvllopjtn CNC: Amada TASK 84 Capacity: 125 tons Stroke: 400 mm Gooseneck length: 410 mm Rapid traverse speed: 200 mm/s Working speed: 1-10 mm/s Return speed: 180 mm/s Distance between uprights: 2700 mm Dimensions: 4000 x 2175 x 3500 (h) mm *Supplied with a NEW 60x60mm multi-V die (16, 22, 32, 50 mm) at 3100 mm. Supplied with a NEW Promecam 85º h135 r0.8mm punch at 3100 mm. Supplied with a new side safety laser.

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a warehouse stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, virtually factory condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical specifications: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 22 Mat.-No.: 216137 Number: 9972270914 CE marking Motor specifications: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Itsdpfx Aoz Sn Ipskpjn Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in the Czech Republic Condition: NEW / UNUSED / WAREHOUSE STOCK The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set for sale is exactly as shown in the pictures.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes Iedpfx Akoy Alcispetn • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Length:430mm Width:130mm Itjdpfx Ajz Arhiskpsn Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines Ijdjz Hkg Aopfx Akpstn DAW 80F RC, year of manufacture 2003, DAW 125 S DV, year of manufacture 1999, DAW 125 F, year of manufacture 2007.

Year of construction: 1974, condition: used, Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement. Ijdez S Iupspfx Akpetn

Condition: excellent (used), For sale: KSB ETACHROM BC centrifugal pump equipped with a Siemens electric motor. The pump is made of stainless steel and designed for industrial applications. The entire unit is mounted on a base. Pump specifications: Manufacturer: KSB Aktiengesellschaft Model: ETACHROM BC Flow rate Q: 11.00 m³/h Head H: 25.39 m Rotational speed: 2880 rpm Iedpfx Aoz Sny Sskpetn Year of manufacture: 2007 Material No.: 00 Serial No.: 9971266604 Flanged connections Motor: Siemens Total weight of the unit: approx. 31 kg The unit has a sticker from the German electric motor repair shop ROCK Elektromotoren Reparaturwerk, indicating that it has been inspected according to VDE, UVV, VBG 4 and DIN standards. The pump is used and in very good visual condition. Condition and completeness are exactly as shown in the pictures. A robust industrial pump from the renowned manufacturer KSB.

Condition: excellent (used), Lagun GUM 125 milling machine in very good condition, equipped with 3 axes, Fagor digital readout, variable feed, and spindle speeds. Specifications: Spindle taper ISO 40 Speed ​​35-1800 (variable) Travel X850 Y290 Z475 mm Table dimensions 1250 x 280 mm Iodpfx Aszrlawskpjtn Automatic feed X, Y & Z High-speed X, Y & Z Motor 7.5 hp-400V Digital readout Fagor 3 axes Year of manufacture 2000 Dimensions (L x W x H) 2050 x 2220 x 2050 mm Weight 1900 kg Variable speed with digital readout in 2 gear ranges, variable feed rate with digital readout. Includes Huron milling head, machine vice and tool holder.

Condition: used, Brand: Kemper Maximum flour capacity: 125 kg Maximum dough capacity: 200 kg Bowl volume: 306 L Number of speeds: 2 Number of timers: 1 Stainless steel bowl Stainless steel spiral Central kneading bar Bowl protection grid Electromechanical controls Analog timer Ijdpfx Aszzz Szjkpetn Power supply: 380 V Increased motor power: 1.1 kW Frequency: 50 Hz Used Kemper SP125 spiral mixer – 125 kg of flour and 200 kg of dough General description The used Kemper SP125 spiral mixer is designed for bakery production that requires kneading large quantities of dough. Its capacity reaches 125 kg of flour, with a maximum load of 200 kg of dough, and a bowl of approximately 306 L. The identified unit has the designation "Type SPL" and "Größe 125" on its manufacturer's plate. It combines a stainless steel bowl and spiral with a two-speed operation. This configuration allows for distinguishing the initial mixing phase from the faster kneading phase, while maintaining a simple organization of the work cycle. Why this model stands out The Kemper SP125 primarily meets the needs of production where kneading capacity and cycle consistency are crucial. Its two speeds are complemented by two timers, allowing the working times to be organized according to the different phases of kneading. The machine also has two motorizations, according to the available data for this unit. The protection grid placed above the bowl limits access to the kneading area during operation. Its design is based on electromechanical controls and a three-phase power supply adapted to a production environment equipped for this type of equipment. Key advantages Maximum capacity of 125 kg of flour, suitable for high-volume production Maximum load of 200 kg of dough Bowl volume of approximately 306 L Two kneading speeds to differentiate work phases Two timers to organize cycle duration Stainless steel bowl and spiral Protection grid for the kneading area Two-motor configuration on this unit

Condition: new, Year of construction: 2020 Empty weight: 118 kg Itodpfx Akez S Htqepjn Carrying capacity: 400 kg Width: 125 cm Attachment suited for: Agricultural machines

Condition: used, Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible. Isdpoz R Uxaefx Akpotn

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 11460000643, functionality: fully functional, operating hours: 35,319 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 10,000 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 10 rpm, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 125 P duoBLOCK, year of manufacture: 2006, operating hours (h): 35,319, serial no.: 11460000643, travels (X/Y/Z): 1,250/1,000/1,000 mm, spindle speed max. 10,000 rpm, 60-fold tool changer, B-axis, 190° swivel, HEIDENHAIN Mill Plus control, internal coolant supply, tool measuring system, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Itodpfxjrkz Tfj Akpon

Condition: used, Bäuerle Type 125/02 heavy-duty thickness planer for the precise sizing (thickness planing) of solid timber and wood-based materials. The robust construction and powerful drive ensure consistent planing results and a long service life. Accessories included. Technical data: - Planing width: 610 mm - Planing height: 200 mm - Planing shaft: Z4 strip planing blades - Feed speed: 7–14 m/min - Motor power: 4.4 kW - Weight: approx. 1,150 kg Itedpfx Aozrxznekpjn

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Itedpfxjz Imcvj Akpsn Wire feeding length: unlimited Bend-back clearance: max. 1.000 mm Weight: 4.000 Kg. complete with an motorized wire decoiler WAFIOS AHL 41

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Diameter over the bed: 1250 mm Diameter over the carriage: 900 mm Itedpfsxwqk Eox Akpen Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Iedjzuw Rtopfx Akpjtn Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: excellent (used), first registration: 07/2018, total length: 4,000 mm, total width: 2,550 mm, wheelbase: 2,220 mm, color: other, Superstructure Fifth wheel height: 125 cm = More information = Year of construction: 2018 Empty weight: 2.280 kg Carrying capacity: 25.720 kg GVW: 28.000 kg APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good Registration number: 20-04-ZZ = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages Iedpsx A Hchjfx Akpjtn - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, PSK series, older generation Tank capacity: 40 to 120 L Standard power supply: 220/380 V three-phase 50 Hz Installed electrical power: 15 kW Electric heaters: 6 × 2.2 kW Compressor power: 3.5 kW Ijdpezx Uhqofx Akpetn Agitator motor power: 0.65 kW Minimum water pressure: 2 atm Water consumption: 400 L/h Thermal fluid: inhibited glycol + water Thermal fluid quantity: 22 L 3-digit digital display 6 operating controls 4 programming controls 7 indicator lights Pasteurization temperature: 50 to 90 °C Programmable holding time: 0 to 30 min Continuous agitation during pasteurization Automatic cooling down to +4 °C Automatic holding at +4 °C Agitation: 15 s every 15 min during holding Discharge by gravity or with agitation Water inlet control to the tank Water control for cleaning the tap Dimensions (L × W × H): 640 × 880 × 1065 mm Net weight: 255 kg Cattabriga PSK 125 ice cream pasteurizer – capacity 40 to 120 L General overview The Cattabriga PSK 125 ice cream pasteurizer is designed for the thermal treatment of mixes used in the production of ice cream and artisanal gelato. This data sheet corresponds to the older generation PSK 125 identified on your machine, which is different from the newer KEL and PRO versions. Its working capacity ranges from 40 to 120 L, allowing for the processing of large volumes of mix in a single tank. What sets this model apart This version of the PSK 125 is based on a robust design combining electric heating, mechanical agitation, and a thermal circuit. The total installed power reaches 15 kW, with six 2.2 kW heaters. The agitator is driven by a 0.65 kW motor, while the compressor delivers 3.5 kW. The control panel features a digital display and controls for operating the machine without using the touch interfaces of the newer generations. Key advantages Capacity of 40 to 120 L for different preparation volumes Installed power of 15 kW, suitable for this tank capacity Integrated mechanical agitation during mix processing Thermal circuit using a mixture of inhibited monopropylene glycol and water Electronic controls with digital display Compact construction with a height of approximately 1065 mm

Condition: used, mileage: 55,449 km, power: 92 kW (125.09 HP), first registration: 11/2006, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro3, loading space width: 1,740 mm, loading space length: 3,350 mm, loading space height: 1,870 mm, Year of construction: 2006, total length: 5,651 mm, total width: 1,974 mm, total height: 2,800 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, Well-maintained Ford Transit 125 T350 panel van L3/H3 with automatic transmission and shelving system +++ Steering wheel paddle shifters +++ Ex-government vehicle from the German Federal Police, regularly serviced with a full service history. This vehicle was used exclusively to handle breakdowns of fleet vehicles outside the facility. It was always kept in a dry, heated facility and is therefore in excellent condition. Features: - Automatic transmission with steering wheel shift paddles - Air conditioning - ABS - 2 airbags - Individual front seats with armrests - Electric mirrors - Central locking with remote - Rear doors with 270° opening angle Itsdoyumpaopfx Akpjn - Rear step - Side sliding door with window - High, closed rear wing doors - Roof-mounted rear strobe lights Cargo area: - Wooden flooring with shelving system - 220V external power supply with fuse box and on-board sub-distribution - Roof cutout with Plexiglas insert for daylight in the cargo area Full service history, last inspection at 54,064 km Very good all-season tires from DOT 2018, 7.5/8.0 mm tread depth, no signs of cracking (vehicle was stored indoors, shielded from UV light) Cargo area dimensions: 3350 x 1740 x 1870 mm (L x W x H) This Transit drives well and the automatic transmission shifts smoothly; also an ideal base for a camper conversion. +++ Subject to error, modifications, and prior sale +++

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Special price due to warehouse clearance: €3,600 ex works Külsheim. Itodpfx Aeww Hvmekpon

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in June 2008. The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. Furthermore, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor. Technical data / equipment: Manufacturer: AWEA Mechatronic Co., Ltd. Model: BM-1200 Serial number: 8015 Manufacturing date: 06/2008 Control system: Heidenhain iTNC 530 15" TFT color screen Tool holder: BT40 Spindle speed: 50 – 12,000 rpm Spindle power: 21 / 15 kW Direct drive spindle Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Table size: 1,300 x 600 mm Rapid traverse X/Y: 30 m/min Rapid traverse Z: 24 m/min Tool magazine: 40 positions Tool change time: approx. 4 seconds Dual gripper Internal coolant / cooling through the spindle, Form A High-pressure coolant pump 20 bar Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Signal light 3-color Red/Yellow/Green Completely enclosed work area with work area lighting Machine documentation available Toolbox Alignment screws and shims Ijdozp Iz Eepfx Akpotn CE specification Weight according to nameplate: approx. 7,500 kg Voltage: 400 V Connection power: 25 kVA Frequency: 50/60 Hz 3 phases Condition: The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.