Used Roller Vacuum Packaging Machine for sale (75,162)

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Complete package: used roller conveyor by Mannesmann Demag Includes 45 x 3m non-driven straight sections, 20 x 45° curves, 10 driven sections with rubber belt, and a suitable number of supports and guides; all elements are 50.2 cm wide. All components originate from a cosmetics factory. The system spanned two floors, and the related documents are also available. It is also possible to purchase selected items only. Nwodpfx Ajxv Df Toaasf Additionally, several boxes of spare parts are available.

Condition: used, Year of construction: 2020, Becker BZ-2 - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of manufacture: 2020 The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine. The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line. The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system. Machine components (see schematic): (1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: Packaging Dimensions (top closure): Njdpfsygipmsx Aaaewf - min. carton dimensions LxWxH: 500 x 120 x 100 mm - max. carton dimensions LxWxH: 2250 x 420 x 320 mm - max. product weight: 50 kg Packaging Dimensions (side closure): - min. carton dimensions LxWxH: 300 x 150 x 120 mm - max. carton dimensions LxWxH: 1050 x 620 x 470 mm - max. product weight: 50 kg Installation: - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Pre-fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Sound pressure level: < 70 dB(A) - Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Nsdpsyvr Irjfx Aaaowf Contact Us Get in touch for: Price Inspection Additional details or videos

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Nodpfewxlm Hox Aaaewf Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: good (used), Year of construction: 2006, functionality: fully functional, A carton folding machine is available for sale. Nwsdpfx Aastyai Reasf Fully functional, fully automatic, adjustable for different sizes. Cartons are not included in the delivery. Siemens control unit Currently set carton dimensions: 240*230*200 mm Upon request, transport and loading can be organized Europe-wide for an additional charge. Prices plus VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Endoline Carton Erector Model 221 With bottom taper Serial number: 051235542 415 V, 3 Ph, 50 Hz Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Nsdpsv Tywwefx Aaajwf Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Condition: good (used), Year of construction: 2014, OCS Checkweigher Weight range min - 100grams, Max 800 grams Speed 30 pieces / min Power 230v / 50hz Complete with touch screen control Two pneumatic reject arms Fully stainless steel Njdpfxsucgale Aaajwf Belt dimensions 1750mm x 195mm In good working condition

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 359, Equipment: CE marking, Packaging machine suitable for packaging with tuft or pillow bags. Handles laminated film. - Brand: ROBYPAK - Model: V500 INOX WITH CLIPPING UNIT - Year of manufacture: 2015 - Current bag dimensions: -- - Structure: AISI 304 stainless steel - Maximum film reel width: 500 mm - Packaged product: MOZZARELLA ACCESSORIES ALREADY INCLUDED WITH THE PACKAGING MACHINE: - Provision for printer/marker - Encoder for plain film (without registration mark) - Centering photocell for printed films - No. 1 forming tube included, 360 mm width - No. 1 rear feed conveyor - Color touchscreen - PLC with Omron electronics - Horizontal sealing bar width: 230 mm - Vertical sealing bar width: 350 mm - Speed: 15/20 packs per minute with clip (rate may vary depending on the product) Condition: Nwedpfoymngqjx Aaasf Used in the dairy sector, in good working condition. Available for inspection at our premises. If you have any questions or need further information, please feel free to send us a message or call us.

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Nwjdoy Aafropfx Aaasf

Condition: good (used), Vacuum packaging machine. Nsdpfx Aaswt Tmkeaowf

Condition: used, cleaning machine, sweeper vacuum machine, Used machine Manufacturer: Kärcher Type: KSM 900 B Dimensions: 1650 x 750 x 1020 mm Working width: 0.8 m Battery: 2 x 12 V Nodpfx Aoy E T Aioaaowf The battery is not included with the machine.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Nedpfextiunex Aaaswf Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Nodpfx Aaex U Eiasaowf Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Machine number: 625/0118 Year of manufacture: 1999 Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency. Nwodpfx Aey Hl Ndoaajf

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: Nedpfsw Ryt Dsx Aaajwf - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 22000 - 10000, input voltage: 240 V, The machine was purchased in 2019 and has never been used. Only FAT/SAT commissioning has been carried out (no production). Various format parts are available and will, of course, be included in the sale. The machine can be inspected at any time by appointment. Additional photos are available upon request. Nwsdeyx Sk Espfx Aaaef Serious offers are always welcome. Transport can be arranged by mutual agreement. If you have any questions or comments, please feel free to contact us.

Condition: excellent (used), Strapping machine Make Mosca Type MO-M1RE YEAR 1991 Nwjdpfx Ajvcyxasaaof 220 Volt

Condition: excellent (used), Year of construction: 2008, Packsize EM6-50MT On-Demand Box Making Machine (2008) We are offering an industrial Packsize EM6-50MT machine, designed for on-demand production of corrugated cardboard packaging. This is the ideal solution for companies looking to eliminate the storage of pre-made boxes and produce cartons precisely according to current requirements. Operation Description The machine enables the quick preparation of cardboard blanks based on specified dimensions: - Input of product dimensions Nsdpfjxqm Nkjx Aaaswf - Automatic feeding of cardboard from roll stock (Z-fold) - Cutting the material to the required format - Creasing (scoring) for easy folding - Preparation of the finished box blank The result is a packaging element ready to be assembled and used. Technical Data - Model: Packsize EM6-50MT - Year of Manufacture: 2008 - Type: Cardboard cutting and creasing machine - Application: Custom-size box production - Dimensions: approx. 600 × 300 × 550 cm Functions - Cardboard cutting from roll - Creasing (scoring lines) - Production of cartons in any dimension - Continuous material feed Equipment - Cardboard unwinder - Cutting and creasing system - Cutting tools - Work table - Electrical control cabinet - Operator panel Applications The machine is ideal for use in: - Warehouses and logistics centers - Manufacturing plants - E-commerce and goods shipping Summary The Packsize EM6-50MT is a proven solution for on-demand carton production. It helps reduce packaging storage costs and allows cardboard boxes to be tailored exactly to your product.

Condition: excellent (used), Year of construction: 2017, Reiser GK512B Vacuum chamber packaging line Nsdpfswtzd Rex Aaajwf 2017, Stainless vaccum chamber packaging line, consisting of Supervac GK Vacuum chamber, Supervac AT hot water shrink tank and Supervac BL15 Drying tunnel, also comes with Supervac BG450 bag opener, 3Ph

Condition: used, Year of construction: 2019, Henkovac T4 – Professional Vacuum Packaging Machine (2019) Reliable vacuum performance with robust build quality for food‑industry environments. The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products. Nwsdpfxeyudtio Aaaof Technical Specifications - Model: Henkovac T4 (Tabletop) - Year: 2019 (design generation from this period) - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations - Chamber Dimensions: approx. 530 × 590 × 460 mm - Seal Bar Length: approx. 420 mm - Weight: ~55 kg - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request) Key Features - High‑Quality Busch Vacuum Pump: Proven reliability and performance for continuous operation - Deep‑Drawn Stainless Steel Vacuum Chamber: Durable, easy‑to‑clean construction - Maintenance‑Friendly Design: Simple access and serviceability help reduce downtime - Cable‑Free Welding Bar: Clean sealing without clutter, enhancing hygiene and safety - Intuitive Control Panel: Digital time control with optional program upgrades - Optional Consumables Starter Kit: Includes Teflon tape and welding wire for immediate use Ideal For - Vacuum packaging of meats, cheeses, dry goods, and prepared foods - Retail food‑to‑go operations - Small to medium commercial kitchens - Product portioning and shelf‑life extension * Model: Henkovac T4 (Tabletop)

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights Njdpfx Aaev Hw Hceajwf - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Nodpfxoy Anifs Aaaewf

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Nodeyyplcjpfx Aaajwf

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Nwodpfx Ajv Sa Utoaaof Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: used, Gietart Roller conveyor shotblasting machine Nwodpfoidlq Sjx Aaasf Type: Roller conveyor Max. width of workpiece: 1500 mm Max. height of workpiece: 550 mm Max. workpiece weight: 600-800 kg/m