Used Perske Other for sale (21,144)

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/450/H600 mm Kedpfx Aob Uhvdodqodr -Weight: 74 kg

Condition: good (used), Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm -Weight: 55 kg Kjdpfxscv H A Ne Adqedr

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , Kodpjqx Sz Defx Adqsdr There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp

Year of construction: 2023, condition: new, machine/vehicle number: 801694948, Drill string + hydraulic hammer 8x 76mm DTH drill string, 4000mm x 63mm, 2 3-8" API Reg 1x 3.5" DTH hammer with "shank with 2 3-8" API Kdsdpfjhypv Rsx Adqer Further information: Application: Construction

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Kdodpfjya Hvqjx Adqsr Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 630/420/H700 mm Kedpfsb Uhirjx Adqsdr -Weight: 56 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit allows you to pre-mill the upper and lower edge overhang -with keying: from 1 side each -1x engines Perske -Power: 1.125 kW -Voltage: 165 volts Kjdob Uhvcspfx Adqsdr -Frequency: 300 Hz -Speed: 18000 rpm -1x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/340/H600 mm -Weight: 50 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg Kjdpfx Adob Uhvfsqjdr

Condition: used, operating hours: 6,235 h, machine/vehicle number: 169, mileage: 48,250 km, color: orange, First registration: 08/1995 Permissible total weight: 4,000 kg Kdsdpfx Adjiuludjqor Errors and omissions excepted.

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. Ksdpfx Adsztar Roqjdr 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Housing Material Stainless Steel Ksdpfowm I S Iex Adqjdr Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen

Condition: used, mileage: 22,000 km, power: 162 kW (220.26 HP), first registration: 07/1998, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 08/2026, gearing type: mechanical, emission class: euro2, loading space width: 2,470 mm, loading space length: 3,800 mm, loading space height: 1,730 mm, Year of construction: 1998, total length: 7,300 mm, total width: 2,500 mm, total height: 3,150 mm, Equipment: ABS, all wheel drive, parking heater, 1st owner, directly from the garage of a volunteer German fire department. Very well-maintained vehicle, with no issues whatsoever. Maintained with service records throughout its life at the local MAN authorized workshop. Service record (MAN service booklet) with 25 entries. Last service on August 13, 2025, at 21,702 km. In operation with original registration documents until the end of July 2026 and now de-registered. Drove trouble-free for over 600 kilometers on the highway to us in August 2026. Tanker fire engine TLF 16/25 with METZ superstructure from 1998. With integrated ambient lighting. 2,350 liters of extinguishing water. GRP water tank. Rear pump FP 16/8 with 174 operating hours (last pump service in 2025 at 171 hours). Rapid intervention line with dimensionally stable hose (30 meters) on the rear right side. Light mast between the cab and the superstructure. Wheelbase 3600 mm. Leaf spring suspension. ABS. 6 seats. WEBASTO AirTop - auxiliary heater. 2 breathing apparatus stations (the breathing apparatus holders were newly installed in 2017, the invoice from Lentner for 1415.00 EUR is available). New tires in 2018 (Continental 10R22.5 with snowflake symbol, DOT 2018, invoice for 4055 EUR). Numerous original documents are available, including the CAD construction drawings of the tanker fire engine from 1998 by METZ, various TÜV reports, repair invoices from MAN, 2 inspection books, mileage log, etc. Original price was 295,000 DM, a considerable price at the time for a new fire engine. Overall dimensions: Length 7.30 m, width 2.50 m, height 3.15 m. Unladen weight: 7830 kg. Permissible total weight was originally 12,000 kg. Upgraded in 1998 with TÜV approval to 13,500 kg. Six-cylinder inline diesel engine with 6871 ccm and 220 hp. Euro 2. 6-speed manual transmission. 95 km/h. Small ball-type trailer coupling with 2000 kg towing capacity (braked) and 1500 kg towing capacity (unbraked). Fire extinguishing pump completely checked by Rosenbauer in 2020 at 149 operating hours; 3 new shut-off valves were installed, and the Vacumatic venting system was repaired. This beautiful used vehicle is still in excellent condition and has the full potential to continue providing many years of high-quality service for a fire department. According to a written statement from the municipality, the TLF has been completely accident-free to date. There is no rust to be found anywhere, and no other defects are known. This is a really good vehicle. Kedjzvtpzepfx Adqsdr The TÜV inspection is due in August 2026 and will be renewed by us on August 25, 2026. The inspection certificate (SP) is valid until 08/2027. The approximately 22,800 total kilometers can be verified as the original total mileage of this fire engine. This fire engine is available immediately. This offer applies only to commercial enterprises and freelancers of all kinds, as well as to authorities and emergency services. Unfortunately, we do not sell to private individuals. Subject to prior sale and errors. The purchase price is understood as the final price, gross = net according to §25a UStG (differential taxation). Thank you for your inquiry.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. Kdjdpfx Aszvcknedqjr • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Kdedpfjwm Nd Ejx Adqer

Year of construction: 2011, condition: good (used), Carreffe Electric Pallet Truck with Tool Handler 12 volt power Electric lift and drive 1600mm lift mast Capacity 350kg Kdjdpfx Aomk Uwcsdqer 360 degree rotation on the tool handler Video available on request

Condition: used, 7-foot container! Like new! With side door & window! Kdsdpfx Adezvkb Uoqor ----* Forklift pockets * Good condition! Like new! Used only once! * With side door & window * Color: Anthracite * External dimensions: approx. Length = 2.23 m, Width = approx. 1.85 m, Height = 2.01 m * Price from 24601 Stolpe, Germany: 1,900 Euros, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp ?All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.?

Year of construction: 1994, condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled Ksdpsb Uhqajfx Adqjdr -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Weight: 64 kg

Year of construction: 1994, condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm Kodeb Uhp Tjpfx Adqsdr -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg

Year of construction: 2012, condition: used, Empty weight: 8.500 kg Carrying capacity: 200 kg GVW: 8.700 kg Length: 30 cm Lifting capacity: 200 kg Serial number: 162 Machining center comprising: - A 2012 OKK VC-X350 CNC lathe - A Fanuc M-20iA robotic tool changer Technical specifications: Ksdszvcckopfx Adqjdr - Axis travel: - X: 600 mm - Y: 430 mm - Z: 460 mm - A: -120° to +30° - C: 360° - Table-to-spindle nose distance: 70 mm – 530 mm - Table working surface: 350 mm - Table load capacity: 200 kg - Feed rate: - X/Y: 50 m/min - Z: 36 m/min - Cutting feed (X/Y/Z): 36 m/min - Spindle: - Power: 50/30 HP - Spindle speed: 12,000 rpm - Taper type: BT40 - Tools: - Number of standard tools: 120 - Maximum tool weight: 7 kg - Maximum tool length: 300 mm - Maximum tool diameter: 82 mm / 125 mm without adjacent tool - Tool-to-tool change time: approximately 1.3 seconds - Machine weight: 8,500 kg - Approximate dimensions: L 1,895 mm x W 3,440 mm x H 3,000 mm - Machine controller: FANUC F31i-A5 Hours on the clock: approximately 5,540 h Sold with workbenches and cabinets, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), A good used Thermal Transfer overprinter from Open Date Equipment Ltd - model 107L - intermittent motion TTO with a large print area of 107 x 160mm - complete with frame power supply - keyapd - software and cables. Manuals available Kedoyg Nluopfx Adqjdr Ready to ship worldwide Export documentation available Request additional images and videos via Whats App

Condition: used, mileage: 35,995 km, power: 125 kW (169.95 HP), first registration: 01/2001, overall weight: 9,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 2000, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, all wheel drive, M.A.N 8.174 LAE 4x4 firefighting vehicle 8/6 First registration: 08.01.2000 Approx. 35,995 kilometers Wheelbase: 3,560 mm ABS Cruise control 6-speed manual gearbox All-wheel drive Transfer gearbox (crawler gear) Differential lock Fog lights Kdodpfxoycn Hie Adqor Rear view camera Double cab (DOKA) with 4 doors 9 seats Single tires 335 / 80 R20 MPT Rockinger trailer hitch with 12/24 volt socket Body built by ZIEGLER, year 2000, as per DIN 14530 600 liter water tank Hose reel rear right Ziegler rear pump FP 8/8 ????Rear ladder missing???? ?? NEW MOT upon purchase ?? VAT margin scheme according to § 25a

Condition: excellent (used), George Nutting Co. INC Tablet De-Duster Kdsdjzp Hmyjpfx Adqor

Year of construction: 2019, condition: good (used), Zanotti Uniblock GCU5150B2B9E2L Horizontal condensing unit Kjdpfjzvli Hex Adqsdr 2019, four fan unit, see plate for full spec, 3Ph

Condition: not inspected (used), functionality: unexamined, Perske electric motor taken from a circular saw with a toothed blade, Hüllhorst KLS 430 V Saw motor Kodpfx Adszkdtgoqodr

Year of construction: 2014, condition: used, Empty weight: 4 kg Length: 78 cm Serial number: 22220 V251403 5-axis machining center comprising: - a NAKAMURA lathe, TYPE: NTMX, year: 2014, 5-axis dual-spindle + milling head. - a SAMSYS+ bar feeder, Model: M3000, year: 2014 - an LNS YOSHIDA chip conveyor Technical specifications: - capacity: - max turning diameter: 200 mm - Max turning length: 780 mm - Distance between centers: max 980 mm / min 210 mm - Bar capacity: 51 mm on both left and right - Chuck size: 165 or 210 mm - Axis travel: - X1/X2 slide travel: 570 mm / 130.5 mm - Z1/Z2/B2 slide travel: 1,297/658/770 mm - Y-axis travel: ±100 - Left/right spindle: - Speed: 5,000 rpm - Tool spindle: - Speed: 12,000 rpm - Tool type: CAPTO C4 - Number of tools in magazine: 24 - Max. tool diameter: 60 mm - Max. tool length: 180 mm - Max. tool weight: 4 kg - Indexing range: 190° - Turret: - Type: 12-sided drum turret - Number of indexing positions: 24 - Square tool size: 20 mm Ksdozvccdspfx Adqedr - Round tool size: 20 mm diameter - Spindle speed: 6,000 min⁻¹ - Floor dimensions: L 4,225 mm x W 3,015 mm x H 2,650 mm - Approximate machine weight: 14,500 kg Hours on the counter: approximately 3,622 h Sold with 1 cabinet and 2 workbenches, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online...