Used Movacolor Peripheral for sale (444)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds Nsdpszz Rpcofx Akiolh - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Nledpez Agw Eofx Akish - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: Njdpfxez Ag Rro Akielh - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Nledpfezw D Nuex Akieh Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg Nedpfopg N Szox Akijlh

Condition: excellent (used), Year of construction: 2016, Initial commissioning: 2016 Control system: Heidenhain iTNC 530 incl. handwheel HR 520 Machine operating hours: Machine powered on: approx. 56,700 h Spindle hours: approx. 15,700 h Spindle hours, current milling spindle: approx. 6,700 h X-axis: approx. 2,400 mm Y-axis: approx. 2,900 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Work table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH60 Spindle power: 63 kW Spindle speed: max. 15,000 min-1 Torque: 300 Nm Tool interface: HSK 100A Tool clamping: hydraulic Coolant supply: external and internal Drive systems for linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Nlodpj Adtu Dofx Akieh Connected power: 190 kVa Fuse rating: approx. 315 A Dimensions, weights Footprint of machine with peripherals: approx. 10,000 x 7,000 x 5,900 mm Total weight: approx. 65,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - water-cooled portal - coolant supply with belt filter system - 50-position tool changer - work area cover - chip conveyor - Keller oil mist extraction system Optional, at an extra charge: - Renishaw RMP60 wireless measuring probe - BLUM laser tool measurement system Condition of the machine Fully functional, in very good condition and can be inspected while powered on! More pictures available upon request!

Condition: used, Year of construction: 2013, machine/vehicle number: MBI17, Used Casepacking Monoblock ITAL PAL 1650 bph The Used Casepacking Monoblock ITAL PAL 1650 bph is a packaging system that consists of three independent units that operate in sequence to ensure an efficient and continuous process. Consequently, it enhances production flow while minimizing bottlenecks. The machines that make up the Used Casepacking Monoblock ITAL PAL 1650 bph were manufactured by ITAL PAL in 2013. Notably, the system’s design focuses on efficiency, durability, and flexibility. The monoblock consists of a FCN70 case erector (Case Erector), a PK300 T1 case packer (Case Packer), and a CSN70 case sealer (Case Sealer), which allow for high flexibility in packaging management. Additionally, these three units operate in sequence to ensure an efficient and continuous process. As a result, the monoblock seamlessly integrates into various production lines. Structure and Components The FCN70 Case Erector automatically opens boxes from flat blanks, ensuring precision in folding and maximum stability. Furthermore, the process automates the handling of materials and supports a straight entrance for optimal integration with the subsequent packaging stages. The PK300 T1 Case Packer is the central element of the system and performs the packing function by inserting products into the cartons with precision. Moreover, this model operates at a production capacity of 1650 bottles per hour (bph), thereby optimizing cycle times and reducing material waste. Similarly, its robust structure ensures long-term performance with minimal maintenance. Finally, the CSN70 Case Sealer completes the process by applying an adhesive tape closure, thus ensuring packaging integrity and product security during transport and storage. Additionally, the sealing system allows for consistent adhesion, reducing the risk of package failure. Technical Features The Used Casepacking Monoblock ITAL PAL 1650 bph features 24 electrical sockets for connecting the different units and controlling and integrating peripheral equipment, such as external conveyor belts, sensors for quality control, barcode scanners, and communication interfaces for seamless connectivity with other machines in the production line. In particular, these additional systems help maintain process accuracy. Furthermore, its modular configuration allows for separate maintenance of the machines, thereby reducing system downtime. The integrated safety features ensure compliance with industrial standards, with protection systems and interlocks that prevent accidents during operation. Likewise, the user interface is designed for intuitive management by technical personnel, while control panels allow the adjustment of processing parameters in real-time. Consequently, the machine offers a balance between automation and operator control. Nedpfxe Adywfs Akislh System Operation The process begins with feeding the blanks into the FCN70 (Case Erector), which performs the opening and forming of the cartons using suction systems and pneumatic pistons. At the same time, the system monitors precision to prevent misalignment. The carton...

Condition: new, Year of construction: 2026, overall weight: 1,900 kg, Big Bag unloading station complete with electric lifting hoist, discharge hopper, structural steel support frame, service platform with access stairs, and perimeter safety guards. Suitable for handling and unloading various bulk materials, including plastic granules, plastic flakes, flour, powders, and similar products. Nsdpfx Akoz Hlgkeijlh

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air-cushioned) Njdpfjytb A Sex Akislh • Light barrier • Programmable • Three extra spare blades • In production • Available: 05/2026

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. Nedpevmylzefx Akielh • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Condition: excellent (used), Year of construction: 2015, First commissioning: 2015 Control system: Heidenhain iTNC 530 HSCI incl. handwheel HR 520 Machine hours Machine operating hours: approx. 78,000 h Spindle hours: approx. 22,000 h Spindle hours of current milling spindle: approx. 250 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping area: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives for linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected power: 190 kVa Fuse rating: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,000 x 5,700 mm Total weight: approx. 63,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Nledpfj Adtq Sjx Akioh Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area cover - Chip conveyor - Keller oil mist extraction system Optional, at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, very good condition, and can still be inspected while running! More pictures available upon request!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, overall weight: 8 kg, load capacity: 1 kg, arm reach: 790 mm, controller manufacturer: igus, controller model: iRC, input voltage: 24 V, repeat accuracy: 1 mm, igus robolink® DP 5 DOF articulated arm robot (RL-DP-5) A functional video can be sent upon request. Manufacturer: igus Model: robolink® DP 5 DOF articulated arm (RL-DP-5) Category: Industrial robot / Articulated arm robot Condition: Used machine / Like new (exhibition piece / test operation) Year of manufacture: 2020 Operating hours: approx. 50 hours Location: 6133 Weerberg / Tyrol Availability: Immediate PRICING: ----- Price type: Negotiable Price (net): 3,450,- EUR (plus 20% VAT, if a B2B invoice is desired) Invoice details: VAT can be shown (B2B invoice possible) For sale is a like-new, immediately ready-for-use 5-axis industrial robot (articulated arm) from the renowned igus® brand, part of the proven robolink® DP series (item number: RL-DP-5). The system was used exclusively for a short laboratory or test project and has only approximately 50 operating hours. The robot is in flawless, absolutely like-new condition, both technically and visually. Thanks to the integrated absolute value encoders on the stepper motors, the arm does not lose its current position even after a power failure, emergency stop, or restart. Complex reference runs are therefore not necessary during ongoing operation. SCOPE OF DELIVERY & SYSTEM PACKAGE: Nlodpfx Akozl N Tusijh • Articulated arm: igus robolink® DP 5 DOF with backlash-free drylin® gears, stepper motors, and encoders. • Control electronics: Modular DIN rail version (complete control computer for mounting in a control cabinet). • Software: Original royalty-free igus iRC (igus Robot Control) programming software (free download for intuitive, easy programming on a PC). • Free test accessories: A fully functional, self-built vacuum gripper is included in the package as a free addition for immediate testing and training. TECHNICAL PARAMETERS: • Degrees of freedom / axes: 5 DOF • Payload: 0.5 kg (nominal) to max. 1.0 kg (depending on the working area) • Reach: approx. 790 mm • Swivel range (axis 1): 360° • Control: igus Robot Control (iRC) – DIN rail control computer • Voltage supply: 24 V DC (approx. 12 A) • Interfaces: 7 digital inputs and outputs (I/Os) for peripherals & gripper • Weight (articulated arm): extremely light 7.94 kg • Repeatability: +/- 1.0 mm CONDITION / INSPECTION: The device is currently ready for operation and can be demonstrated and tested on site if desired. HANDLING & SHIPPING: • Collection preferred (postal code: [Your postal code]) • Insured shipping via a freight forwarder or parcel service in a robust transport box is possible after consultation and upon assumption of costs. • A proper B2B invoice with VAT can be issued upon request. If you are interested or have questions about technical integration, please contact us directly via the message function. ----- Legal notes for used machines: The sale is preferably made to commercial enterprises (B2B) with the exclusion of any warranty, guarantee, and liability for defects. Subject to prior sale.

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. Nodj Abal Ropfx Akislh The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Condition: ready for operation (used), Year of construction: 2009, Two Campetella SPIDER SM2HS are available, breaking capacity: 8kA, power supply: 380V, 50Hz, connected load: 5500VA, weight: 95kg. An on-site inspection is possible. Nledpfeztratjx Akieh

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) Nlsdpjz H Tmrofx Akish • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: ready for operation (used), Year of construction: 2009, There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available. Nedpfxott Slyo Akielh

Condition: used, Year of construction: 2002, ORYCON MAINFRAME 980F-09-S-A-EU REV2 This device is used in industrial plastic injection molding for precise temperature control in hot runner mold systems, utilizing multiple independent control modules. Power Supply and Construction • Input voltage: Can be connected to a 3-phase (400V) or 1-phase (230V) network, depending on the internal terminal block configuration. • Chassis (Mainframe): Robust, all-aluminum construction designed for demanding industrial environments. • Chassis capacity: The chassis features a modular design that is backward- compatible with most common industrial control cards of standard dimensions. Control Cards (Modules) and Sensing • Control accuracy: Achieves high precision of ±0.5°C (or ±1°F) thanks to Orycon Hot Runner Systems microprocessor control. • Sensor types (Thermocouples): Supports industrial Type J (Fe-CuNi) or Type K (NiCr-Ni) thermocouples. • Unit display: Calibration and value display selectable in Celsius (°C) or Fahrenheit (°F). • Operating modes: • Closed Loop: Automatic PID control based on thermocouple feedback. • Open Loop (Manual mode): Percentage-based power control (suitable for emergency completion of work if a mold thermocouple is damaged). Nodpfxez Ilg Hs Akislh

Condition: excellent (used), Like-new condition ejector or diverter gate assembly, complete, for an ARBURG 270 or 320. Nlodpfozub A Hox Akieh

Condition: refurbished (used), Venturi feeding system in very good condition, complete with suction lance and control unit. Njdpfjz H Rffox Akielh The unit is ready for immediate use and is suitable for mounting on an injection molding machine, an extruder, or a drying hopper.

Condition: used, Universal external and internal cylindrical grinding machine ERWIN JUNKER, Type BUAJ 29 NC Nodj Aard Nopfx Akielh External cylindrical grinding machine, internal cylindrical grinding machine Manufacturer's No. 3126, Year of manufacture 2001 Center distance max. 800 mm Workpiece grinding length max. 800 mm Center height 150 mm Swivel diameter max. 295 mm Workpiece weight max. 120 kg Workpiece spindle speed 20 - 750 rpm Spindle stock, internal taper MK 5 Spindle stock, short taper flange DIN 55027, Size 5, Ø 82 mm Spindle stock, spindle bore 36 mm Spindle stock adjustment 355 mm Tailstock, internal taper MK 4 Grinding wheel diameter max. 400 mm Grinding wheel width max. 63 mm Grinding wheel bore Ø 127 mm Grinding wheel peripheral speed 45 m/sec Automatic spindle stock feed 0.001 Manual feed 0.001 mm Hydraulic table movement 0-7.5 m/min Motor power, grinding spindle 7.5 kW Motor power, workpiece spindle stock 1.1 kW Motor power, internal grinding unit 1.75 kW Mains connection 400 Volt, 50 Hz - FANUC control, Type Power Mate-Model D - Grinding spindle stock swivels from +45° to -15° - Workpiece spindle stock swivels 90° - Table can be tilted for taper grinding up to 8°30" - Support/pinole for the workpiece spindle stock with internal taper MK 4 - Internal grinding unit for swiveling in - Internal grinding spindle with collet chuck, Ø 6 mm - Coolant system located beside the machine - Machine equipped with one grinding wheel, Ø 400 x 50 mm - 1 three-jaw chuck TOS, Ø 160 mm - 1 mechanical round magnetic chuck, Ø 200 mm - Collet chuck system with various collets - Various attachments for the internal grinding unit - 1 diamond grinding wheel dresser - Other accessories as shown in the pictures - Operating manual, hydraulic diagram, electrical diagram Space requirement for cylindrical grinding machine with band filter L x W x H 3200 x 2500 x 1900 mm Weight 5000 kg In very good condition

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 59 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: Kuka, For sale is a modern robotic cell with a KUKA industrial robot, model KR 10 R1100-2 / SEL, from the AGILUS-2 series. The system is in very good, like-new condition and is ideally suited for various automation, handling, assembly, or testing applications. The robot is installed inside a robust, fully enclosed safety cabin made of aluminum profiles with large, transparent protective elements. The cell features an integrated linear/positioning unit and a customer-specific gripper or tool mounting. Due to its compact design, the system can be easily integrated into existing production environments. Technical data of the robot: - Manufacturer: KUKA - Type: KR 10 R1100-2 / SEL - Series: AGILUS-2 - Year of manufacture: 03/2025 - Payload: 10 kg - Reach: 1,101 mm - Robot weight: 59 kg - Article number: 0010028076 - Serial number: 4613832 - Origin: Germany The offered unit includes the robotic cell shown in the pictures, including the robot, enclosure, and the mechanics or peripherals installed within the cell, as depicted in the images. The system is suitable, for example, for pick-and-place applications, machine loading, parts handling, assembly, testing, and sorting tasks, as well as a basis for customer-specific automation projects. Condition: very well maintained / like new Year of manufacture of the robot: 2025 Inspection: possible by appointment. Subject to prior sale and errors. Nlodpfxezznzie Akioh

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Nledpfx Ajzpw Saokish Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: good (used), Year of construction: 1993, SHEER Granulator Regretfully, 5.5 kW motor 1 new milling cutter available as an option: €4,000 Nsdpfxeip N Une Akijlh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Nlsdpfjz T Nc Dex Akijh Includes material parameters for: - 316L stainless steel (1.4404), - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - Internal sieving device - to be mounted on top of dose chamber - External sieving station QM Powder - for independent inertized sieving process --- Size: 1050 x 995 x 1600 mm --- Weight: 350 kg --- Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz --- Compatible with bottles and Concept Laser M2 powder containers - Wet vacuum cleaner for powder materials Ruwac NA7-11 - Electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - Stylish storage for 4 powder containers (some containers included with the machine) --- Size: 1150 x 1220 x 870 mm (H x W x D) --- Weight: 250 kg Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank -- Extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H -- Chamber: 350 x 500 x 250 mm (W x D x H) -- External dimension: 840 x 1160 x 1320 mm (W x D x H) -- Weight: 260 kg + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 container from MASS. These are available in various sizes (see pictures). Nodpfx Akeip Ucnsiolh