Used Mat Rollforming Unit 18 Stations for sale (44,551)

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. Dcsdpfjibichjx Am Rjh The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1997, functionality: fully functional, power: 5.5 kW (7.48 HP), suction capacity: 5,500 m³/h, filter area: 40 m², overall weight: 1,500 kg, an outdoor extraction system with 5.5 kW motor, electric discharge, 4 chip bags Dodpfxsyn Ehze Am Rech

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Dcedpfxoxf Ur Ao Am Rjh Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Year of construction: 1979, condition: not inspected (used), Hahn & Kolb Variomatic 12 station indexing table automat -WKG 443- Offered here is an automatic indexing plate machine from the company Hahn&Kolb. Technical data: Manufacturer: Hahn&Kolb Type: Variomatic T 4-12 Year of manufacture: 1979 Table: Ø 630mm Units: 1x spindle unit, 1x slide unit, 8x quill units Dcjdpjhg Nkrefx Am Rsh Chuck outer diameter: 135mm Max. Workpiece clamping width: 80mm Max. Drilling capacity in steel: 16mm

Condition: good (used), Material station Motan 6x6 diameter 60 mm year: price: 2.850 € contact: Mr. Rainer Eckerle Dcjdpfx Amsqnvife Roh

Condition: used, Multi-station bridge unloader for unloading panels from an angle saw Panel Size: * Maximum length: 3200 mm (4200 – 5600 mm) * Minimum length: 300 mm * Maximum width: 1300 mm * Minimum width: 200 mm * Maximum thickness: 150 mm * Minimum thickness: 10 mm Dcjdjrzhd Sopfx Am Reh * Maximum height from the ground: 1850 mm * Minimum height from the ground: 250 mm * Maximum working height: 1600 mm Load capacity: * Maximum weight per cycle: 250 (350 – 500 – 700) kg Work rate: * Charger: 8-10 cycles/minute * Unloader: 8-10 cycles/minute This unloader is particularly suitable for moving significantly heavy boulders in various product double beam structure and the Brushless motors make it fast and suitable for the automation of high-performance lines productivity []

Condition: excellent (used), functionality: fully functional, Göpel electronic GmbH Automatic Optical Inspection Unit AOI, OptiCon AdvancedLine X60 Model: OptiCon Type: AdvancedLineX60 Operating hours: 51,326 h (switch-on time from internal PLC) Year of manufacture: 2014 Technical specifications: Voltage: 230 V AC Frequency: 50/60 Hz Rated power: 800 VA Short-circuit breaking capacity: 15 kA Compressed air: 6 bar Laser class: 2 Protection class: IP20 Features: - 4M camera with T21 resolution and 42 x 42 mm field of view Dcedpswlquiofx Am Rsh - Angled view - "Chameleon Colour" module - Extended inspection area in the X direction to 670 mm - 2D barcode reader from below - Software version: 5.3

Year of construction: 2021, condition: new, modular drilling machine 8 automatic units Do: Go mad Model: Dcsdpfxshara Dj Am Rsh Wu 3g 2C 3T Description: Producer GOMAD Benh7jc8jp Year of production 2021 Machine category Modular drilling machine location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Shipping costs Client protection Start type to be agreed Description Remarks MODULAR MODULAR DRILL, TRAILER SLIDING BLADE, HALF-ADAPTATION WITH AIR PEDAL DRILL EQUIPMENT Year: 2021 THE NEW VERSATILE DRILLING MACHINE

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Forming Depth (Max.): 110mm Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Used power: 55Kw Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Dcsdpfeyvh Tqex Am Rsh Weight: About 11.0T

Condition: good (used), Power supply: 230V 50Hz (1-phase) Dcodpfx Aecip Suem Reh very good condition - nearly new

Condition: refurbished (used), Double knurling machine with drilling unit, for spindles with central hole. Dcsdpopk Taxofx Am Rsh Complete with loader, unloading belt and finished price containment.

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Dodeif Ug Espfx Am Rsch

Condition: repair required (used), functionality: fully functional, mileage: 287,268 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,000 kg, first registration: 04/2010, emission class: euro5, color: grey, tire size: 17 Zoll, number of seats: 9, Year of construction: 2010, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, sliding door, traction control, trailer coupling, winter tires, ATTENTION – The engine has increased oil consumption and slight vibrations due to a defective dual-mass flywheel. The vehicle is therefore sold as defective without warranty. The vehicle is fully roadworthy. Dcjdpfxewmqdae Am Reh The vehicle registration certificate has expired. Equipment: ABS, ASR, ESP, driver's airbag, passenger's airbag, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, fog lights, radio central locking and immobilizer, air conditioning, hands-free system, height-adjustable driver's seat with armrest, cup holder, power steering, leather-wrapped steering wheel, steering wheel adjustment, cruise control, CD-MP3 radio, sliding door on the right, rear hinged doors with window, rear window heater with wiper, winter tires, rubber cargo floor, cargo securing eyes, sliding window on the left, 17-inch tires, 17-inch chassis, trailer hitch, DPF EURO5 Total weight: 3000 kg, towing capacity: 2500 kg Subject to change and errors.

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A Dodpfx Aotp Df Hem Rsch • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: used, Removed from working unit. Please check out our other listings as well. Dcsdewxax Depfx Am Rjh

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Dedoy Ur Hljpfx Am Rsch Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), Indramat MDD112C-N-020-N2L-180GA0 Permanent magnet motor, hole spacing of the mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm, used, professionally tested and overhauled, with 12 months warranty, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Dcsdpfji D Iwmsx Am Rjh

Condition: ready for operation (used), Indramat MDD071C-N-060-N2L-095GB0 Permanent Magnet Motor SN:MDD071-07018, used, normal signs of use, 100% functional, scope of delivery as per photos Djdpji D Iunefx Am Roch

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor SN:MAC115-04930, used, normal signs of use, 100% functional, scope of delivery as per photos Djdpfxoi D Irhs Am Rech

Condition: new, Indramat MDD071B-N-030-N2S-095PA1 Permanent magnet motor, SN:18968 ,unused, 100% functional, scope of delivery according to photos Dcodpji D It Uefx Am Rjh

Condition: new, Rexroth Indramat ADF134B-B05TA0-BS16-A2N2 3-phase induction motor, SN: ADF134-01848, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedpfx Amei D Nc So Rjch

Condition: ready for operation (used), Indramat MAC 112D-0-FG-3-F/180-A-0/S011 Servo motor SN:71378 ,used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedpfx Asi D Ikasm Rech

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), very good condition, 100% functional Dcjdpfxei Eblao Am Rsh

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 Dcsdpfx Amjzbmzpj Roh max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC main spindle drive SN:230902-761859-015, used, normal signs of use, 100% functional, delivery as per photos. Dsdpfxex Etxdj Am Rjch