Used Johnford Vmc-1600S for sale (2,351)

Condition: not inspected (used), Fanuc OM Control Bdjdpfx Akov Sunneasb XYZ 600x400x460 Speed 45-6000 Taper ISO 40 Tool station 16 Table 920x320

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) Bdodpfsyxdwdjx Akaeb • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Bedpfsyzbd Tsx Akasdb

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces Bdodpfx Ajdt Ttkskasb carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Condition: used, Year of construction: 2012, AVIA VMC 650 - Vertical Machining Center - Taper: ISO 40 - X/Y/Z Travel: 650 / 540 / 620 mm The AVIA VMC 650 vertical machining center is specifically designed for the production of small to medium batch sizes. With a maximum workpiece weight of 700 kg, heavier parts can also be machined without difficulty. High rapid traverse rates of 25 m/min on the X, Y, and Z axes ensure the machine's high efficiency. A spindle speed of 10,000 rpm guarantees excellent surface finishes on a wide variety of materials. - Heidenhain iTNC 530 HSCI CNC control - Tool changer with 24 stations - Chip auger conveyor - Year of manufacture: 2012 Technical Data Table: - Table size: 800 x 540 mm - T-slots (size/spacing/number): 18 mm / 100 mm / 5 - Max. workpiece weight: 700 kg Spindle: - Type: Cartridge - Tool taper: ISO 40 according to PN-92/M-55085/01 (DIN 69871A) - Pull stud standard: ISO 7388/2 Type B - Distance spindle nose/table min./max.: 150 / 770 mm - Max. spindle speed: 50 - 10,000 rpm - Motor power (S6-40% duty cycle): 11.5 kW - Motor power (continuous): 7.5 kW Bodpoy Dg Hfjfx Akajdb Tool Magazine: - Number of tools: 24 - Max. tool diameter: 80 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Tool change time: 6.0 s Travel: - Max. X-axis travel: 650 mm - Max. Y-axis travel: 540 mm - Max. Z-axis travel: 620 mm Accuracy (according to ISO 230-2): - Positioning accuracy: ± 0.005 mm - Repeatability: 0.005 mm Rapid traverse: - Rapid feed X/Y/Z: 25 / 25 / 25 m/min Pneumatic Requirement: - Network pressure: 0.6 MPa - Air consumption: 0.2 m³/min - Air quality: Class 5 as per DIN ISO 8573-1 Electrical Data: - Power supply (continuous): 3x 400 V / 50 Hz / 40 kVA - Drives and motors: Heidenhain Dimensions: - Width of front cabin door: 770 mm - Machine dimensions (W x H x D): 2560 x 2705 x 2722 mm - Machine weight: 4,135 kg

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M Bodjx Iwg Ropfx Akaedb max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Compliance: CE conformity available Availability: On request Bodoytpc Hjpfx Akaedb

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Bedpfx Akjyy R Hzeasdb Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Bsdpfxovf D Anj Akaedb

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 7,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, total height: 1,635 mm, total width: 1,690 mm, overall weight: 2,600 kg, controller manufacturer: FANUC, product length (max.): 1,850 mm, number of axes: 3, This 3-axis DN SOLUTIONS Leo 1600 turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 320 mm and a turning length of 303 mm. The machine is equipped with a 6-inch main spindle chuck and offers a rapid traverse speed of 30 m/min in both X and Z axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS Leo 1600 machine we have for sale. Contact us for further details. • Main spindle chuck size: 6 inch (153 mm) • Bar capacity: 45 mm • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Main spindle torque: 72 Nm • Max turning diameter: 320 mm • Max turning length: 303 mm • Number of tool stations: 12 • Guideway type: Linear guideways • Monitor size: 10.4 inch • Electrical connection: 380 V Bdsdpfxsyu R Nwj Akaeb • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 14.97 kVA • Full load current: 22.74 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment • Optional: • 8 pcs. External clamping piece • 1 pc. Face turning tool post 850418 (500-5804) • 3 pcs. Internal turning tool post • Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, basic tool post included Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Bjdpfxoym Sdyo Akasdb Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 Bsdoym R Tgopfx Akaedb € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability Bdedpfx Asxhfkuokasb This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg Bdsdpfx Akoykqtzsasb MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 410 mm z-travel 520 mm Spindle Speed 8000 U/min. table length 840 mm table width 420 mm engine output 15 kW tool change unit 16 control SIEMENS 810 shopmill rapid traverse X- and Y-axis 36 m/min rapid traverse Z-axis 20 m/min taper ISO SK 40 Bjdpfx Aksyv Ngxoaodb dimensions 2200x2300x2300 mm weight 2500 kg Youtube-Video-Links: ?v=lGP4FX8j_Gg ?v=WSiuzCJw6G4

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: SELCA, controller model: 3045, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Eikon VMC 1000 was manufactured in 2000. It features a 10,000 RPM spindle, a 20-tool changer, and X/Y/Z travels of 1000mm, 500mm, and 400mm respectively. Equipped with a Selca 3045 control system, consider the opportunity to buy this Eikon VMC 1000 vertical machining centre. Contact us for more information. Bdjdpfsycicxjx Akaeb • ATC capacity: 20 tool positions

Condition: ready for operation (used), Year of construction: 2003, controller manufacturer: SIEMENS, controller model: SINUMERIK, total height: 2,450 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of axes: 3, This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. Additional equipment • Max Torque: 100 Nm (at 5000 RPM), 78 Nm (at 8000 RPM option) • Tool Change Time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Span-to-span Time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant System: Tank capacity 100 liters / Flow rate 10 l/min / Max delivery pressure 3.7 bar / 4 external nozzles • Lubrication System: Automatic central lubrication for guideways and ball screw spindle / Grease lubrication for main spindle bearings • Pneumatic Connection / System pressure 5 - 10 bar • Minimum air flow 750 l/min / Average air consumption 180 l/min • Electrical Connection: Power supply 3/PE ~ 400 V 50/60 Hz / Connected load 15 KVA / Main fuse 35 A slow-blow Machine Benefits Technical Machine Benefits • Qualitative machine benefits: • Reliable tool change system with 12 stations • Integrated automatic lubrication system for guideways and ball screw spindles Bedpfx Akoya Hg Nsajdb Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant Bjdpfox D E Dyjx Akaodb • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Year of construction: 2000, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 1,500 rpm, number of axes: 2, This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, it's designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information. • Drilling capacity: Ø 50 mm Bedpfsygl Ekex Akasdb • Arm reach: 1,600 mm • Spindle travel: 350 mm • Quill diameter: Ø 70 mm • Distance spindle–base: 750–1,450 mm • Cube dimensions: 610 x 770 x 510 mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 814 mm, controller manufacturer: HAAS, number of axes: 4, This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. • Table with integrated rotary table 4th axis • Table dimensions: length 1626 mm x width 814 mm • Rotary table diameter: 762 mm • Tool changer: 30 +1 • renishaw probe included • Last geometry check by HAAS in 2023Machine still under power Additional equipment • Coolant tank with low and high pressure pumps • 2 chip conveyors with screwrenishaw probe included Last geometry check by HAAS in 2023 Technical Specification Taper Size SK 50 Bjdpfex D Eppsx Akasdb

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 640, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Additional equipment • Accessories: Chip conveyor Machine Benefits Technical Machine Benefits • Table size: 1800 x 810 mm • Allowed weight: 2000 kg Bjdpfx Ajyallqokaedb • Automatic tool changer: atc 24 positions Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2013, operating hours: 16,981 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2013. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1800 x 810 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. Bdedpfx Akoypcfmjajb • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Table size: 1800 × 810 mm • Maximum workpiece weight: 2000 kg • Spindle torque: 109–1052 Nm • Tool magazine capacity: 24 tools • Tool changer condition: defective • Supply voltage: 400 V • Power supply: 3 / PE • Frequency: 50 / 60 Hz • Rated current (IB): 58 A • Nominal current (IN): 63 A • Hours: 16,981 h Additional equipment • Optional 4th axis for 10.000€ Technical Specification Taper Size SK 40

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm Bdodex D Nxzjpfx Akasb • Clamping Force: 3500 kN

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Bdedsya H Nkopfx Akasb Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426 P, workpiece weight (max.): 900 kg, rotational speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal travel X: mm 1020 Transversal travel Y: mm 510 Vertical travel Z: mm 500 Rapid traverse X, Y: m/min 40 Rapid traverse Z: m/min 25 SPINDLE: Spindle power: kW 19 Max spindle speed: rpm 10.000 Spindle taper: BT 40 TABLE: Table surface: mm 1150 × 490 T-slots: 5 on 100 mm pitch Maximum table load: kg 900 TOOL CHANGER: Tool magazine capacity: 30 positions Tool change time: sec 3.5 Max tool weight: kg 6 Bedpfx Ajyr Sbiekasdb Max tool length: mm 250 Max tool diameter: mm 80 Machine equipped with: • Chip conveyor • Instruction manuals and CE Declaration