Used Gleason- Pfauter P 2400/2800 for sale (42,745)

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Nedpfoy Hfm Nex Ahfewk Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 Nsdpfou Sbfdsx Ahfswk total power requirement 0 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 300 mm gear width: 110 mm max. module: 6 weight of the machine ca.: 10,5 t Nwodpfx Aexz Aw Eshfsk *

Condition: excellent (used), Year of construction: 2006, operating hours: 53,244 h, functionality: fully functional, Technical Data – Gleason Phoenix II 600HC (CNC Hypoid Gear Cutting Machine) Njdpfsxwzu Ijx Ahfjwk Working Area Max. workpiece diameter: Ø 600 mm Max. tooth depth: 24.6 mm Max. gear width: 110 mm Number of teeth: 1–300 Cutterhead size face milling (FM): 18" diameter Cutterhead size hobbing (FH): 210 mm radius Max. cutter spindle speed: 600 min⁻¹ Work Spindle Front taper diameter: Ø 203 mm Taper bore diameter: Ø 181 mm Bore depth: 884 mm Max. work spindle speed: 600 min⁻¹ Dimensions and Weight Footprint L × W × H: 4.4 × 3.5 × 3.5 m (incl. peripherals) Machine weight: 26,000 kg Connection Data Total connected load: 139 kVA Main fuse: 200 A Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 90 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 400 mm, spindle bore: 40 mm, TECHNICAL DETAILS Travel Distance X-Axis: 90 mm Travel Distance Y-Axis: 80 mm Travel Distance Z-Axis: 400 mm Maximum Permissible Head Circle Diameter: 140 mm Milling Arbor Diameter: 22 mm Maximum Gear Cutting Length: 160 mm Angles Nwsdexvrarepfx Ahfjk Maximum Swivel Angle of Milling Head +A Direction: 45° Maximum Swivel Angle of Milling Head -A Direction: 118° Workpiece Spindle Outer Diameter: 105 mm Bore: 40 mm Rapid Traverse X-Axis: 7,500 mm/min Y-Axis: 5,000 mm/min Z-Axis: 15,000 mm/min Rotational Speeds Tool: 50 to 4,000 rpm Workpiece Spindle max.: 3,000 rpm MACHINE DETAILS Operating Hours: 29,790 h Cycle Time: 6,654 h Electrical Connection Mains Connection: 400 V (AC) Supply Voltage: 400 V (AC) Control Voltage: 24 V (DC) Frequency: 50 Hz Connected Load: 13 kVA Cable Cross-Section: 16 mm² Fuse Rating: 63 A Dimensions & Weight Space Requirement: 5.25 x 4.06 x 2.94 m Machine Weight: 8 t EQUIPMENT Industrial Filter IFS EC1500 Sediment Separator Knoll KF200/640 Integrated Chip Conveyor with Magnetic Separator Machine Automation for Loading and Unloading Workpieces Robot Automation Güdel KTB-31/62, Year Built: 2018 with Station for Part Remover

Condition: used, Year of construction: 1987, max. wheel diameter 4400 mm gear width 645 mm max. module 35 Control Siemens main drive motor 37 kW table diameter 2500 mm ical angle +/- 30 ° workpiece weight 40000 kg Nwsdpeyqt S Hefx Ahfok total power requirement 142 kVA weight of the machine ca. 75 t Partial overhaul 2006 5 controlled axes a, c, x, y, z Max. gear outer diameter 3000 mm Max. outer diameter for internal gears 3560 mm Max. module with hobs 30 Max. module with internal form cutters 18 Min. gear diameter 900 mm Axial feed travel 1800 mm Largest axial slide travel 1800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW Nodpfoynmm Ejx Ahfewk weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm Nwsdpfeynbdlsx Ahfek diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system "pinion shaft"

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min Nedpfxovxwmtj Ahfowk work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Nwjdpfxjxaqa Sj Ahfek Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm Nwodpfx Aeruakgohfjk 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Year of construction: 2011, condition: used, overall weight: 50,000 kg, total length: 9,500 mm, total width: 8,000 mm, total height: 5,200 mm, Working Area X-axis travel 3,900 mm Y-axis travel 2,940 mm Z-axis travel 1,100 mm B-axis (swivel head) 90° freely interpolating NC rotary table Ø 2,800 mm Max. workpiece weight 15,000 kg Spindle Tool holder SK 50 Spindle power 63 kW Max. torque 200 Nm Max. speed 6,000 min⁻¹ Feed Rapid traverse X/Y/Z 30 / 30 / 25 m/min Feed force 9,000 N Tool magazine Tool positions 20 Nwjdszwa Rnspfx Ahfsk Max. tool diameter 110 mm With free adjacent positions 180 mm Max. tool length 400 mm Rotary Table Clamping surface Ø 2,800 mm Max. transport load 15,000 kg Tangential moment 40,000 Nm Tilting moment 90,000 Nm Electrical connection values 3 × 400 V / 50 Hz Equipment HEIDENHAIN iTNC 530 HSCI NC rotary table Ø 2,800 mm Freely interpolating swivel head Portal design Full enclosure Automatic central lubrication Coolant system Chip conveyor Control panel on swivel arm Control: HEIDENHAIN iTNC 530 HSCI Travel X-axis: 3900 - mm Dimensions (LxWxH) approx.: 9500 x 8000 x 5200 mm 5-axis machining: Yes Travel Y-axis: 2940 - mm Movement B-axis: 90 - ° NC rotary table: Yes Travel Z-axis: 1100 - mm Weight approx.: 50,000 kg Year of construction: 2,011 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, mileage: 1,397 km, first registration: 06/2016, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, crane, electronic stability program (ESP), soot filter, * Böcker RK 36-2400 crawler crane * Year of manufacture: 2016 * Operating hours: 1,390 h * ??UVV inspection NEW?? * ??Service NEW?? * ??Winch NEW?? * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale. Nedpfszlwfxsx Ahfewk

Condition: used, mileage: 1,397 km, first registration: 06/2016, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: crane, soot filter, * Böcker RK 36-2400 crawler crane * Year of manufacture: 2016 * Operating hours: 1,390 h Njdpfxezlwf Es Ahfswk * ??UVV inspection NEW?? * ??Service NEW?? * ??Winch NEW?? * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, The last maintenance carried out by the manufacturer took place in December 2025. Nwodpfx Aezrx A Eohfsk The plant is still in operation and can be viewed at any time. Including dismantling and loading; expected to be available from September 2026 Technical data: - Spindles: 4 - Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm - Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm - Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm - Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm - Working width: 230 mm - Working height: 160 mm - Feed: 11 kW / 60 m/min - Control system: Memory Plus System

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with Nwedpfxezn Iwqe Ahfjk 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Nwodpfx Ahjv T Aqgsfsk

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Nsdpfx Aszdum Rehfowk

Condition: used, Year of construction: 2015, Manufacturer: Marel / Townsend Model: Peeler BL 2800 Year: 2015 Condition: Used Serial Number: 10145585 Stock Number: 3261 Consisting of: Marel Townsend sausage peeler Type: Peeler BL 2800 Serial number: 10145585 Year of construction: 2015 Capacity: 225 m/min Diameter: 13 - 41 mm Steam: 1.7 - 3.4 Bar, 78 kg/h Compressed air: 7 Bar Power: 3 x 380V, 50Hz, 3.8kW Dimensions: 900 x 600 x 1600 mm Weight: 340 kg Nedpfxjyyncae Ahfowk Marel Townsend blower unit Type: Blower 2800 Serial number: 10394495 Year of construction: 2017 Blower: Russo SKV-NS-420-3-826 Power: 3 x 400V, 50Hz, 3kW Dimensions: 1400 x 700 x 1200 mm Weight: 180 kg

Condition: used, Year of construction: 2010, Mobile measuring arm for measuring machine, measuring device Nsdpfswu E D Rsx Ahfowk Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of manufacture: 2010 – unused Measuring diameter: 2,400 mm 22726

Condition: used, mileage: 110,769 km, power: 96 kW (130.52 HP), first registration: 04/2001, overall weight: 5,600 kg, fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro1, loading space width: 2,100 mm, loading space length: 3,450 mm, loading space height: 390 mm, total length: 6,330 mm, total width: 2,180 mm, total height: 2,450 mm, number of seats: 3, Equipment: ABS, crane, Equipment: * Body/Superstructure: Platform with crane * Harms Body Construction * Platform with aluminum sideboards * Internal dimensions: 3,450 mm x 2,100 mm x 390 mm * Trailer hitch Varioblock Crane: * Palfinger PK 2.800 A * Year of manufacture: 2000 * Auxiliary drive for motor * 2-point outrigger system * Load hook * No 5+6 control circuit available. Reach/Lifting capacity: * 3.15m = 830 kg * 4.35m = 600 kg * 5.60m = 460 kg Other: * Formerly a VW IAA trade fair vehicle Nodpezqhzhefx Ahfjwk * 2 previous owners (1x VW) * Originally delivered in Germany * Engine: 2.8 L - 96 kW * Payload: 2,495 kg Since 1972, we have been your reliable partner for everything related to cars/commercial vehicles in 28832 Achim, near Bremen. Behnke Commercial Vehicle Center constantly has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer attractive financing options at favorable special rates. If you are interested, we will be happy to prepare a customized offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: used, ABB Robot IRB 2400/16 Type B M2004 Industrial Robot IRC 5 Robot Nwsdoznkmbspfx Ahfjk 2 units in stock.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Nedpfedzwwnjx Ahfswk -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Condition: used, Year of construction: 1989, For sale is a robust GIERLICH hot foil stamping machine in good condition. Technical data: Manufacturer: GIERLICH Type: PE 1200-2400-2P electronic Year of manufacture: 1989 The machine can be inspected by appointment near Solingen. Sale from foundation. Subject to prior sale. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. Nwedszi U Thopfx Ahfek The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat (Hydromat) 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Nwsdpfx Aozwfwtjhfok Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed