Used Erka Wma 30 for sale (25,330)

Condition: used, Year of construction: 1996, operating hours: 11,088 h, load capacity: 10,000 kg, lifting height: 5,000 mm, load center: 600 mm, Brand: Svetruck Model: 1060-30 Year of manufacture: 1996 Operating hours: approx. 11,088 h Load capacity: 10,000 kg Lifting height: 5,000 mm Load center: 600 mm Fuel: Diesel Volvo engine, 6-cylinder Dedoxbczdspfx Aa Hjkt Condition: Good used (hydraulic pump replaced one year ago, hand brake caliper fully overhauled, forklift stored in dry conditions, equipped with two new tilt cylinders, new bolts, and pendulum bearing on the rear axle (steering) replaced). Regular inspections carried out.

Condition: used, Year of construction: 2004, x-travel 1020 mm Dodpozzfbtjfx Aa Hokt y-travel 510 mm z-travel 500 mm control Heidenhain iTNC530 weight of the machine ca. 4700 kg

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – Dkedpfozy U Rusx Aa Het T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3292010, total width: 1,070 mm, total length: 2,030 mm, total height: 2,320 mm, input voltage: 400 V, ULTRON U-100 ultrasonic cleaner – 30 kW – 400 V – 2011 For sale: ULTRON U-100 industrial ultrasonic cleaner, manufactured in 2011, designed for thorough cleaning and degreasing of industrial components using ultrasonic technology. The machine has an ultrasonic power of 30,000 W and operates on a 400 V power supply. The unit is constructed from stainless steel and features a spacious working chamber with a lid. Additional equipment/modification: The cleaner has been fitted with a custom-made lifting and lowering mechanism for the basket, operated by an actuator, which greatly simplifies the loading and unloading of cleaned components and the operation of the device. Technical data: - Manufacturer: ULTRON - Model: U-100 - Year of manufacture: 2011 - Machine number: 3292010 - Ultrasonic power: 30,000 W - Power supply voltage: 400 V - Overall dimensions: 2030 × 1070 × 2320 mm - Basket lifting/lowering: by means of an actuator – custom-made - Construction: stainless steel The machine has a robust, industrial design and is suitable for use in production plants, workshops, and for cleaning industrial parts and components. Dsdpfx Ajzza Inea Hekt Transportation is the responsibility of the buyer.

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Dodpozndurofx Aa Hjkt Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - 25mm Iso panel - PVC flooring - Supports Net price: €7,890.76 / Gross price: €9,390.00 Article number: BTH115362023.02 Technical data: • Brand: Blyss • Model: H15362HN • Vehicle type: Sales trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 360 x 203 x 230 cm • External dimensions (L x W x H): 524 x 215 x 277 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 690 kg • Payload: 810 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Sturdy V-shaped drawbar, hot-dip galvanized • Single-axle • Floor made of multiplex • Side walls made of sturdy GRP sandwich, 25 mm thick • Sales flap on the right side • PVC covering on the floor • Additional sales flap at the rear • Door in the front panel, lockable from inside and outside • Step on the drawbar • Support wheel with clamping bracket • 4 scissor supports mounted incl. crank • Maintenance-free rubber spring axle from KNOTT • Shock absorbers incl. 100 km/h registration • Automatic reversing system • KNOTT inertia coupling and parking brake • Plastic mudguards Dksdpfxjyacglo Aa Hst • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates incl. customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 702563, Year of construction: 2007, operating hours: 7,720 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,280 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 6,500 mm Free lift: 2,280 mm Mast height: 3,100 mm Fork length: 1,190 mm Minimum fork width: 250 mm Maximum fork width: 1,100 mm MACHINE DETAILS Mast type: Triplex Fuel type: LPG Engine manufacturer: Nissan Number of wheels: 4 Dimensions (L x W x H): 2,830 x 1,240 x 3,110 mm Transport packages: 1 piece Operating hours: 7,720 h Djdpfx Ajzxckasa Hskt EQUIPMENT Side shift Work lights Partial cab Documentation CE marking

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, Zeiss Accura II - measuring range 2000x3000x1500 mm - RDS with XXT ( possible additionally LineScan) - C99 - pneumatic damping system - laser safety system installed Dksdpfx Aozpzp Nsa Hot - compressed air drying system included - probe changer, callibration sphere, aluminiumi threaded plate included - latest Calypso basic CNC - installation and callibration included (ILAC possible)

Condition: used, functionality: fully functional, Jointer-planer, thicknesser SCM MiniMax FS 30 Specifications: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM MiniMax series • Model – FS 30 • Working width – 300 mm • Working height of the thicknesser – 240 mm Dodoza E H Ijpfx Aa Hjkt • Table length – 149 cm • Noise-reducing combs near the shaft • Motor power – 1.85 kW (220V – can be changed to 380V) • 3-knife shaft for traditional knives (diameter 70 mm) • Side table 43 x 22 cm for a drill • Head with a drill chuck for drills with a diameter of 16 mm • Original paint • Weight 260 kg • Overall dimensions 150 x 105 x 102 cm (length x width x height) Additional information: • The machine is in good technical condition and ready for immediate use • The presented photos show the actual condition of the item being sold • Possibility to switch on and test the device on-site • Free training on how to operate the machine (at the company's premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease financing

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Dkodpfx Aaezb Uwlj Hjt Vision inspection system Capacity: up to 600–800 pcs/min Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min PLC control: Delta HMI touch screens Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: side flap, sandwich panel construction Equipment: - PVC flooring - Supports - 25mm insulated wall Net price: €8,193.28 / Gross price: €9,750.00 Article number: BTH220402023.01 Technical data: • Brand: Blyss • Model: HB20421HT • Vehicle type: sales trailer • Vehicle condition: new • Initial registration: without initial registration • TÜV/MOT: 2 years from initial registration • Interior dimensions (LxWxH): 400 x 200 x 230 cm • Exterior dimensions (LxWxH): 610 x 210 x 276 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,000 kg • Unladen weight: 840 kg • Payload: 1,160 kg • Chassis: low loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-shaped drawbar, hot-dip galvanized • Tandem axle • Floor panel made of plywood • Side walls made of sturdy GRP sandwich, 25 mm thick • Rounded corner profiles for an aerodynamic look • Sales flap on the right side, lockable • PVC flooring • Door in the front panel, can be locked from the inside and outside • Step on the drawbar • Support wheel with clamping bracket • 4x scissor supports mounted incl. crank • Maintenance-free rubber spring axle from KNOTT • Reverse driving assistance system • KNOTT inertia coupling and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Dkedpfx Aeyacgroa Hst 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 2013, screw diameter: 38 mm, Brand: Krauss Maffei Technologies GmbH Djdjzuk Irepfx Aa Hokt Model: KME 38-30 Screw type: Single screw Year of manufacture: 2013 Screw diameter: 38 mm L/D ratio: 30 It is supplied without a screw and is in very good condition; the machine was never used in production.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Dkjdpjzyappjfx Aa Hst Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, Dksdszh I Agjpfx Aa Hjt table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow Oil Cooler D20V D30V 2 Flow Oil Coolers - Coolant system for machine cooling - individual sale possible. Two stand-alone flow oil coolers / circulating coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Dsdpfxog U H E Se Aa Hskt Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr Flow Oil Cooler Type D 20 V, Year of manufacture 1998, serial number 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow Oil Cooler D 30 V Wöhr Flow Oil Cooler Type D 30 V, year of manufacture 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Price negotiable Our target price per unit is €1,950 net, ex works, plus packaging costs. All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Union.

Condition: used, mileage: 81,129 km, power: 96 kW (130.52 HP), first registration: 04/2013, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,900 mm, loading space width: 1,630 mm, loading space height: 1,720 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, 3-seater, power steering, 6-speed manual gearbox, tachometer, power steering, driver airbag, Euro5, electric windows, onboard computer, electric exterior mirrors, center armrest, Euro4, central locking with remote control, rear wing doors, right side door, unladen weight: approx. 2,400 kg, payload: approx. 900 kg, etc. Errors, prior sale, and omissions excepted. Sale to business customers and export only. !!!! Fg-1635 !!!! Key number 117 !!!!! Test/inspection drive to Tüv Dekra or Fiat possible !!!!! On request with new TÜV !!!!! Dksdpfx Aasywqbae Hst

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: LE-2104-133, For Sale: Labtech LE30-30/C 3D Filament Extrusion Line We are offering for sale a high-quality 3D filament extrusion line manufactured by Labtech Engineering Co., Ltd., a well-known producer of laboratory and production extrusion equipment. Technical Specifications Manufacturer: Labtech Engineering Co., Ltd. Model: LE30-30/C Year of Manufacture: 2021 Power Supply: 400 V Phase: 3 Installed Power: 16.7 kW CE Certified Price: EUR 45,000 Condition The machine is in excellent condition, has been professionally maintained, and is ready for immediate production use. Included in the Sale Complete 3D filament extrusion line Additional spare barrel 25mm Additional spare screw 25mm/24D Optional Equipment Available for Purchase Laser diameter gauge Material dryer Dkodpfxozgwlzo Aa Het Material feeding/dosing system This extrusion line is suitable for the production of high-quality 3D printing filaments and offers reliable operation with consistent output quality. Additional photos, technical details, and machine inspections can be provided upon request. Location: Ivanka pri Nitre

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,000 kg, total length: 12,500 mm, total width: 5,600 mm, machine/vehicle number: 0-280-15-2017, We offer a used, automatic, two-chamber loading station from the renowned BARGSTEDT brand, model RTBH22/D/30/12. This unit is ideal for modern woodworking facilities where efficiency and process automation are crucial. Thanks to its two chambers, it ensures continuous operation and significantly improves material handling, minimizing downtime. The robust construction and the reliability of the BARGSTEDT brand guarantee long-lasting, trouble-free operation. Automatic loading from two chambers. Dkedpezgcd Aofx Aa Hst Capacity: 8 cycles/minute. Loading with vacuum suction cups. Maximum panel size: 1300*2500. Option to purchase the entire line, including a roller conveyor equipped with a conical swivel and a double-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3.

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Coolant, Low volt light, Swarf Conveyor. Djdpfezh Hvxsx Aa Hskt

Condition: new, empty load weight: 560 kg, maximum load weight: 440 kg, overall weight: 1,000 kg, loading space length: 2,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 155r13c, Highly visible sales trailer for snacks or goods. Our* snack trailers* are manufactured in an insulated sandwich construction. A very stable frame, welded and hot-dip galvanized, provides the basic stability. The flaps and doors have a welded frame so that the sales box is permanently stable. A proper personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich case body has a galvanized sheet steel outer skin which is also powder-coated. The insulation is a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The *snack van* is supported by 4 crank supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *food*, *beverages*, *fast food*, *low food*, *non-food,* * *street food*, *sales goods* and much more. Dkodpfopfcpfex Aa Hst The standard equipment of the sales trailer at a glance: *entry door lockable with personal lock*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, four stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. As accessories for our *sales trolleys* we offer further *sales flaps*, *tarp triangles*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, PVC on floor, *100km/h shock absorber* and *anti-theft device*.

Condition: used, Year of construction: 1999, operating hours: 23,765 h, Type of fuel: Electric Colour: Grey Empty weight: 4.900 kg Dimensions (LxBxH): 240 x 120 x 243 cm Lifting capacity: 3.000 kg Lift height: 380 cm Fork dimensions: 1.340 x 680 mm - Year: 1999 - Documentation available: Yes - └ Type Documentation: User manual - CE certificate present: No - Serial number: 516025008830 - Operating hours: 23765 - Lifting capacity: 3000kg - Lifting height: 3800mm - Overhead clearance: 2430mm - Free lift: 0mm - Fork length: 1340mm - Maximum fork width: 680mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Hydraulic extendable forks - Options: Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Hoppecke - Battery year of construction: 2016 - Capacity: 700Ah - Battery voltage: 80V - Transport dimensions: 2400mm x 1200mm x 2430mm (l x w x h) - Transport weight [kg]: 4900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Djdpfxjydlnys Aa Hskt Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, empty load weight: 620 kg, maximum load weight: 680 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 165r13c, Sturdy sales trailer for snacks or goods. Our* snack bar trailers* from the *SELLER* range are manufactured in an insulated sandwich construction. The extremely stable frame is welded and hot-dip galvanized, which ensures basic stability. The *sales flap* and *door* have a welded frame so that the *sales case* is permanently stable. A personal lock in steel and *not in plastic* is installed in the door. The 30 mm sandwich *case body* has a galvanized sheet steel skin which is also powder-coated. The insulation is made of a PUR foam core. The *car trailer* is silver-grey on the outside and white on the inside. The food truck is supported by 4 crankable supports. All together an inexpensive *car trailer* for *markets*, *snack bars*, *cocktails*, *fast food*, *non-food*, *street food*, *sales goods* and much more. Our standard equipment of the sales trailer at a glance: *entry door with personal lock lockable*, *step on drawbar*, *sales flap on the right* with lifting aids lockable from the inside, stable *crank supports*, *sandwich body* 30mm outside in silver inside white, manoeuvring handles, jockey wheel with holder, stable *welded frame* and a very stable V-drawbar hot-dip galvanized. Further technical details can be found below. Dkedopfc Dzspfx Aa Hst As accessories for our *sales trolleys* we offer further *flaps*, *tarpaulins*, *electrical equipment*, *bag racks*, sales counters, cupboards, sinks, *PVC floor covering*, *100km/h shock absorbers* and *trailer lock*.

Condition: used, Year of construction: 2012, operating hours: 600 h, functionality: fully functional, total length: 3,100 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 4,650 kg, Equipment: documentation/manual, Mechanical CNC folding machine CIDAN Futura 30 Year of manufacture: 2012 Technical data: Working length: 3100 mm Max thickness of steel sheet: 2 mm Max thickness of stainless steel sheet: 1.25 mm Max thickness of aluminium sheet: 3 mm Beam opening: 195 mm Bending beam motor power: 2.2 kW Clamping beam motor power: 2.2 kW Machine dimensions: length 4100 mm, width 2300 mm, height 1845 mm Weight: 4650 kg Equipment: CNC control with ProLink S graphics Powered rear stop type SBG 15-30-T-30L-20R Rotating upper beam type COMBI MULTIFOLD – segmented lower and bending beam tools with SBG 15 table, height adjustable 0–45 mm Mechanical adjustment of the gap between beams Bending beam bar 10 and 20 mm with quick clamping system Dsdpfx Aex Tv T Hea Hskt Lower beam bar Manual crowning compensation of bending beam Three-button foot pedal Info: Price of a new machine with the above-mentioned equipment: 122,900.00 EUR + VAT

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 3000x1500mm Control - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 autofocus head Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg Laser power - 12,000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G Djdpfxownpmce Aa Hokt CNC control - FSCUT 6000 Power supply - 380V 50Hz three-phase

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics 20kW Table size - 3000x1500mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Dodpfx Aaownpztj Hjkt Laser head - Boci BLT442 autofocus head Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeatable positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 Power supply - 380V 50Hz three-phase