Used Eco Brew Tech 10-20 Hl Complete Brewery Brewhouse (2014) for sale (66,885)

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Ijdpfsyhbxcox Akpotn Year of manufacture: 2015 Pressing force: 40 t

Condition: good (used), Protech Horizontal Collator Model: HC2010 Itsdjv T D Dujpfx Akpjn Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 500 h, Proven and reliable equipment, the Clim 10 or 20 HP is well-suited for temporary air conditioning (cooling and heating) of large spaces. It has been specifically designed and developed to operate completely independently without a water circuit. It can be installed with the same efficiency either inside or outside the areas to be treated. Its integrated control module automatically manages the thermal regulation of the areas based on the entered parameters. 20 HP Model: Powered by 380 V three-phase power. 5 air conditioners available for this model. Usage: between 4,000 and 7,000 hours depending on the machine. Unit price: €4,550 (excluding VAT). Itsdpfx Akez Rv Smjpon 10 HP Model: 220 V single-phase power. 5 air conditioners available for this model. Usage: between 500 and 2,000 hours depending on the machine. Unit price: €3,540 (excluding VAT).

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Itedjyzylvepfx Akpen Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts Iodpfx Akoxxhwljpjtn • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: used, Westtech Woodcracker W600 W820 W1000 W1350 W1800 Log Splitter Tongs Available immediately Itsdpfxjyfqc So Akpsn Westtech Woodcracker W600 - Jaw opening: 620 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 295 kg - Recommended oil flow rate: 25–60 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 6 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W820 - Jaw opening: 820 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 360 kg - Recommended oil flow rate: 25–60 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 10 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1000 - Jaw opening: 1040 mm - Splitting force at 240 bar: 26 t - Dead weight (basic version): 580 kg - Recommended oil flow rate: 40–80 l/min - Recommended operating pressure: 190–250 bar - Carrier vehicle operating weight: 14 t - Optional: Autospeed valve - Optional: Rotator Westtech Woodcracker W1350 - Jaw opening: 1370 mm - Splitting force at 240 bar: 34 t - Dead weight (basic version): 950 kg - Recommended oil flow rate: 80–150 l/min - Recommended operating pressure: 220–270 bar - Carrier vehicle operating weight: 20 t - Optional: Rotator Westtech Woodcracker W1800 - Jaw opening: 1830 mm - Splitting force at 240 bar: 50 t - Dead weight (basic version): 1990 kg - Recommended oil flow rate: 100–190 l/min - Recommended operating pressure: 240–300 bar - Carrier vehicle operating weight: 20 t - Optional: Rotator Various versions and adapter plates available Price on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We can supply the complete range of Westtech Woodcracker products for you! Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Iedpfxei Akrks Akpstn Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Itodjx H R U Sspfx Akpjn Pressing force: 40 t

Condition: used, Year of construction: 1998, Overview  This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details  - Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood - Hot wort: 17 hl - Pouring: approx. 270 kg - Commissioning: 1999/2000 Iodjw Afhfepfx Akpstn - Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) - Recommended room height: min. 4.2 m - Weight (empty): approx. 4,000 kg - Control system: renewed after 2017

Condition: used, Year of construction: 2023, overall weight: 70 kg, terms of delivery: FCA Pegnitz Isdpfx Akezkb Diepjtn delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Itsdpfsztadgjx Akpsn Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Condition: used, Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible. Itedpfx Ajz R Uxmskpjn

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data - Application: Beer (bottles & cans) - Filling type: Isobaric Filling & Seaming - Bottle formats: 33 cl, 50 cl, 75 cl - Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) - Can formats: 33 cl, 44 cl, 50 cl - Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse - Capacity: 650 L - Heating: Propane gas - Electrical: Single-phase Fermentation & Cooling - Total fermentation capacity: 9,800 L - Stabilization capacity: 2,940 L Itodpfx Akjy Sccxjpon - Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  - Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph - Can Seamer | — | — | 2022 | Brand new, never used - Brewhouse | — | — | 2015 | 650 L, propane gas, agitator - Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port - Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated - Semi-Automatic Labeller | — | — | 2015 | Circular reel labels - Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L

Condition: used, Year of construction: 2014, operating hours: 779 h, load capacity: 200 kg, empty load weight: 2,980 kg, fuel type: electric, ATN Piaf 1000R. Year of manufacture: 2014. Working height: 10 meters. Lateral reach: 3.40 meters. Working weight: 2980 kg. 24-volt battery. Integrated charger, 230 volts. In working condition. One side panel is missing. Video available via WhatsApp. Price net + 21% VAT, or net export price with VAT number. Isdpfx Aksz Rqz Aepjtn We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: excellent (used), Year of construction: 2013, volume flow: 2.05 m³/h, operating pressure: 10 bar, pressure: 10 bar, Equipment: refrigerant dryer, FINI K-MAX 20-10 Screw Compressor The compressor is completely new. Motor: 15 kW Capacity: 2.05 m3/min Pressure: 10 bar Year of manufacture: 2013 Itsdpfx Aeyui Aiokpen Operating hours: 2 h The compressor is fully operational.

Condition: excellent (used), functionality: fully functional, empty load weight: 5,630 kg, maximum load weight: 27,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, total length: 12,610 mm, total width: 2,500 mm, total height: 1,150 mm, color: black, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Göbel / System Trailer Interchangeable Chassis COS27 Rare special equipment! For sale is an exceptionally equipped Göbel 3-axle interchangeable chassis / container chassis in very good condition. The trailers have been used very little and have been well maintained. Due to the extensive special equipment, this is not a standard container chassis, but a technically very interesting and rare configuration. Of particular note is the combination of WABCO OptiLoad and a BPW trailing steering axle with Active Reverse Control. The first axle is designed as a lift axle with WABCO OptiLoad. The system ensures a permanently optimized fifth wheel load and load distribution via automatic air spring relief. The rear BPW steering axle steers in normal driving operation and also provides active support when reversing. The steering can be additionally influenced via the existing remote control. Especially when maneuvering and in confined spaces, this design offers a significant advantage over a conventional container chassis! The chassis is designed for various container configurations and features a twist-lock system and a gooseneck design. Equipment / special features: 3-axle interchangeable chassis / container chassis WABCO OptiLoad on the first axle Itodpfxsz D Umuo Akpsn first axle as a lift axle BPW trailing steering axle BPW Active Reverse Control steers when reversing remote control for the steering system WABCO EBS braking system WABCO SmartBoard / TIM with ECAS operation gooseneck design twist-lock container locking accommodation of various container sizes possible 2 stainless steel toolboxes with high-gloss polished front flap, approx. 1,000 x 500 x 500 mm ALCOA Dura-Bright aluminum rims 11.75 x 22.5 inches tires 385/55 R22.5 with M+S and snowflake symbol DUO-MATIC air connection 15-pole electrical connection complete lighting system in LED design additional reversing lights high-quality KTL coating additional powder coating in RAL 9005 deep black The original new price for this extensive special configuration was over 50,000 € net. The main inspection (HU) will be renewed before delivery. Several interchangeable chassis are available. Two largely identically equipped interchangeable chassis are available in this design. Available designs or container accommodations: 10 ft 20 ft 30 ft 40 ft In addition, another interchangeable chassis for a 20-foot container is available. If desired, a suitable design / material container is also available. Further information on the individual chassis, container dimensions and available combinations is available upon request. A viewing is only possible after prior arrangement. Image note: AI-assisted adjustment of background, vegetation and lighting mood. Vehicle unchanged.

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Ijdpfel Hxmdsx Akpetn

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Itjdpezvgdlsfx Akpen Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2016, _____For sale on behalf of a customer: Kaweco Profi 2. 20 VCB, year of manufacture 2016, suction arm on the right, forced steering, tires 750/60 R30.5, telescopic axle, hydraulic suspension, hydraulic drawbar suspension, air pressure plus hydraulic brakes, ball hitch, load sensing (but not Isobus), vacuum pump 13500 liters, 3-point hydraulics, 7.20 meter Opti-Ject slot seeder. Price: 55,000.00 euros net, storage location: null. Isdpfx Aszpcvkskpstn

Condition: used, functionality: fully functional, mileage: 15,700 km, power: 183.87 kW (249.99 HP), first registration: 07/2009, fuel type: diesel, color: red, number of seats: 9, From our immediately available stock of used vehicles, we offer you: Fire engine HLF 10 ALL-WHEEL DRIVE 4x2 on IVECO FF140E25 The LF10 is the standard fire engine for rural areas and small towns. It is suitable for both firefighting and technical assistance operations. General data: • First registration: 07/2009 • Mileage: approx. 15,700 km Chassis: • IVECO FF140E25 4x2 with 250 hp (185 kW) • Manual transmission • Trailer coupling Cab: • Standard crew cab (1:8) in RAL 3000 (fire engine red) • Mountings for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Magirus • HLF10 superstructure according to DIN standard • Three large side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mountings for standard equipment • Mountings for 2 additional compressed air breathing apparatus Vehicle pump/fire extinguishing agent tank: • Magirus FPN 2000-10 fire extinguishing centrifugal pump • Output: 1,000 l/min at 10 bar • Water tank: 1,000 l • Foam tank: 120 l Firefighting equipment: • Fixed, quick-attack hose reel, long, on top, G6 Itodpfsznkkyox Akpsn Safety and lighting • Area lighting on the superstructure • Pneumatic lighting mast We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather provides information. Subject to prior sale!

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ SM ID: 300.30 Asset No.: A1998.016 Ijdpfoztafdjx Akpotn Clamping force: 200 t Serial No.: 33813 Year of manufacture: 1998 Control system: CC 100 Screw diameter: 55 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes

Condition: ready for operation (used), Year of construction: 1990, Motor power: 15 kW Iedpfx Aksv I Sqfepotn Maximum pressure: 10 bar

Condition: good (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Manufacturer: Ecoair, control cabinet test field on mobile base -Type: 10 outlets -Switching capacity: Outputs 1-5 max. 11 kVA / Outputs 6-10 max. 7 kVA -Features: see photos -Dimensions: 2075/1000/H2150 mm Itodpfjzrufvox Akpjn -Weight: 373 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA • Maximum sheet thickness: 10 mm • Maximum cutting length: 3200 mm • Blade rake angle: 1°30′ • Cutting frequency: 10 strokes/min • Back-gauge travel: 600 mm • Distance between side frames: 3450 mm • Blade length: 3300 mm • Table height: 800 mm • Motor power: 15 kW • Weight: 10,000 kg • Dimensions (L × W × H): 4050 × 2050 × 1950 mm • Controller: ESTUN E21S • Cutting-line indicator: Illuminated STANDARD EQUIPMENT • Motorized back gauge • Ball-guided back-gauge system • Hydraulic sheet hold-downs along the full cutting length • Segmented, individually replaceable blades • Blade-gap adjustment • Ball transfer units on the worktable • Front material-support arms • Front gauge with measuring scale • Front and rear safety guards • Foot-control pedal Iedsyt Itqjpfx Akpetn • ESTUN E21S controller • Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Operating and maintenance manual in English This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: ready for operation (used), Oiltech LOC-007-4-D-A air/oil cooler with AC motor-pump unit SN:4207452/10/3, used, normal signs of wear, 100% functional, delivery scope as per photos, ATTENTION: Please enquire separately for costs of packing and transport! Itodpfx Akex Et Skopon