Used Dumeta D-Hb-3 for sale (86,477)

Condition: used, maximum load weight: 23,065 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 08/2008, next inspection (TÜV): 02/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, According to our "General and Expressed Terms and Conditions" and without any guarantee or warranty, we can offer you the following vehicle subject to prior sale, errors, and omissions excepted, with no obligation until contract conclusion: Schmitz City Refrigerated Trailer (Vehicle 230) First registration: 30.08.2008 Type: SKO 20/ LZG-13.4 FP 80/45 Perm. gross weight: 32,000 kg Unladen weight: 8,935 kg Payload: 23,065 kg Overall length: 13,550 mm Overall width: 2,600 mm Overall height: 4,000 mm Internal length: 13,400 mm Internal width: 2,500 mm Internal height: 2,400 mm Type: Ferroplast 2 x lashing rails in each wall, one above the other Tail lift BÄR, 3,000 kg, mounted at the rear Refrigeration unit: Carrier Maxima 1300 5,279 operating hours Diesel Temperature recorder 2 x 12-ton 2-speed landing gears Spare wheel holder Iijdpfxsyygbbo Amiob Air bellows renewed 10/2025 Air suspension with raise & lower function Various impact damages 2 x LED work lights rear sideways + 2 x LED reversing lights Tires: 425/65R22.5, front approx. 40%, rear approx. 60/40% Inspection (TÜV) valid until 02/, safety inspection. Steerable axle Plastic toolbox Water tank Price: €3,000.00 (net) All details are given without any guarantee or warranty. Our "General and Expressed Terms and Conditions" apply. For both parties, jurisdiction up to a disputed amount of €50,000.00 is the District Court of Ludwigslust. For higher amounts, the Regional Court of Schwerin applies. Subject to prior sale, errors, and omissions.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Iijdpsfv Aykofx Amijb Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, weight max. 1000 kg Iedefv A Afspfx Amisib workpiece diameter 20-800 mm connected load frequency 230 V speed 100 - 1000 mm/min total power requirement 0,1 kW weight of the machine ca. 65 kg dimensions of the machine ca. 520x470x390 mm

Condition: new, weight max. 5000 kg workpiece diameter 250 - 2500 mm total power requirement 0,75 kW table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 800 kg range L-W-H 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected Iiodpfx Ajn N D Iwomiob - With foot switch for start/stop - Drive with DC electric motors and gears

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Iedpfxogvkpfj Amioib Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Foot pedal (start-stop / left-right) | - remote control

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW Iiedpfx Amjgvwgcjisb load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces Iisdpfxjgvkk Ns Amijb from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included Iisdpjh Evt Ujfx Amiob - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: used, mileage: 6,146 km, power: 382 kW (519.37 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Re-registered to GSS 19.12.24 Driver comfort seat with air suspension, lumbar support, shoulder adjustment and heating, construction site package, EBS, full brake assistant, roll-away lock, MAN TipMatic Manoeuvre - manoeuvring mode, LED lighting, ASR, emergency brake assistant, lane departure warning system, trailer coupling ring spring type RF50 A, MAN Mediasystem Advanced 7'', without navigation map, RIO BOX, smartphone integration, tipper body 4.900mm x 2,380mm Meiller type D316, lashing eyes retractable in floor panel, height side drop side 900mm, height front drop side 1,100 mm, 350mm guide plate on front wall, steps on front wall, fixed corner posts, height rear wall 900mm, rear wall swinging, 150mm dumping chute on tipper body, axial pump tipping hydraulics Meiller type 275/1 power take-off gearbox abh. Iisdjuyrnlspfx Amisb

Condition: used, mileage: 24,749 km, power: 382 kW (519.37 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Roll tarpaulin, trailer tipping hydraulics, air-suspended driver's comfort seat with lumbar support, adjustable shoulder section, and heating, construction site package, EBS, full brake assist, roll-away protection, MAN TipMatic Manoeuvre - shunting mode, LED lighting, ASR (traction control), emergency brake assist, lane departure warning system, Ringfeder type RF50 A trailer coupling, MAN Media System Advanced 7'' (without navigation card), RIO BOX, smartphone integration, tipping platform 4,900 mm x 2,380 mm Meiller type D316, recessed lashing eyes in floor plate, sideboard height 900 mm, front wall height 1,100 mm, 350 mm deflector plate on front wall, access steps on front wall, fixed corner stanchions, tailgate height 900 mm, tailgate swinging, 150 mm discharge chute on tipping platform, axial pump for tipping hydraulics Meiller type 275/1, gearbox-dependent PTO, Meiller roll tarpaulin. Isdpfouciyzex Amijib

Condition: new, weight max. 40 t workpiece diameter 600 - 4500 mm drum diameter 400 x 160 mm feed 100 - 1000 mm/min Ijdjfv A Eajpfx Amijib total power requirement 3 kW

Condition: new, weight max. 5 t workpiece diameter 250 - 2500 mm Iedofv A A Ujpfx Amisib drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust Iedpfx Amehua Dqjieib

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Iiedpfxefg U Sij Amiob Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base.

Condition: new, thread dia. M3 - M8 mm Ijdpfx Asfg U Snsmioib

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. Iijdpfx Aefg U Sqemijb 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: new, thread dia. M3 - M12 mm 400 U/min. 28 Nm air pressure 6 - 8 bar working area 150 - 1900 mm weight of the machine ca. 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. Ijded Iinuepfx Amisib 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33.

Condition: new, thread dia. 12 mm 375 U/min. working area 180 - 1000 mm engine output 0,7 kW Ijdpfx Aofg U Spsmisib

Condition: new, thread dia. M6 - M22 mm 60/200 U/min. 105 Nm air pressure 6 - 8 bar working area 400 - 2000 mm Iedpfjfg U Skex Amijib

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. Isdpfx Amed Iinmeieib working area 180 - 1000 mm engine output 0,7 kW weight 22 kg

Condition: new, thread dia. 12 mm 375 U/min. working area 180 - 2000 mm engine output 0,7 kW Iiedpsd Iinnsfx Amijb weight 28 kg

Condition: new, table diameter 2500 mm table load 20,0 t Iijdpfxjfv Axms Amiob swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, Table dimensions 800 x 800 mm table load 1500 Kg swivelling range 0 - 105 Grad turning speeds 0,15 - 1 U/min height adjustment 672 - 1180 mm hollow spindle diameter mm welding current 500 Ampere max. torque on the faceplate 3000 Nm total power requirement 0,75 kW dimensions of the machine ca. 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load Iijdpjfv Azpefx Amiob • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, table diameter 350 mm table load 100 / 50 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 5,0 U/min spindle bore 30 mm Iodpfxeg Rk Dls Amijib Torque 150 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 100kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Iodefv Axfopfx Amijib • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.