Used Deckel Maho Cnc Machining Center for sale (68,484)

Condition: ready for operation (used), Year of construction: 2013, Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000m, weight: approx. 42000kg. Documentation available. An on-site inspection is possible. Hedpfxjy Ant Ro Aicenk

Year of construction: 2010, condition: good (used), machine/vehicle number: 182245, table mounting size: 500 x 1050 mm movements x/y/z: ca. 800/500/500 mm spindle taper: BT 40 ISA min./max. distance table/spindle: 100/650 mm spindle turning speed range: 8000 rpm number of tool positions: 24 pieces Hjdpfx Aedbh Udsiconk carriages: 5 - 6000 mm/min rapid move: ca. 15 m/min spindle drive: 11/15 kW electrical connection: 400 V, ca. 20 kVA kW space needed: 2450 x 2220 x 2780 mm weight: 5200 kg Delivery time: approx. middle April 2017

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW Hsdez N T Sspfx Aiconk The machine is sold as a spare part carrier because the controller is defective. electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm weight: ca. 5000 kg

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Hnsdpfsyymz Ujx Aicsk Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement Hodpfoyy R Hzex Aicjnk The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hedpfxjxy Tmno Aicenk

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Hsdpfx Asxy Tlwjicenk

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Hedpfx Aijyviqdecjnk Parts shown by hand not come.

Condition: good (used), Year of construction: 2004, Parts shown by hand not come. Hnjdpoylykxofx Aicsk

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Hedpfx Asyw Naueicjnk Technical details are shown on picture.

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Hnedpfx Aijx N Atfscok

Condition: good (used), Year of construction: 1985, Machine is in good working condition. Hsdpfoyvt Rhjx Aiconk X axis travel - 4000mm Parts shown by hand not come.

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Hnsdpfox Awzbsx Aicsk X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: good (used), Year of construction: 2004, Machine is good working condition. Hodpoyufn Iefx Aicsnk Control unit Heidenhain TNC 530 Parts shown by hand not come.

Condition: good (used), Year of construction: 2002, Machine is in good condition. Hsdpfx Ajtwpamsicsnk Parts shown by hand not come.

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Technical data shown on pictures. Hodpfxjuxrv Ho Aicenk

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Hedpfxjrpn Dvo Aicsnk

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Hnodpfx Aewk Nm Ieicjk

Condition: good (used), Parts on table not come. Marked with red. Hedpewxdyxefx Aicsnk

Condition: good (used), Year of construction: 2009, Machine will come with robot . Hodpexfu S Njfx Aiconk 42.000 rpm

Condition: good (used), Year of construction: 2001, Technical data added in attachment. Machine is in good working condition. Parts shown by hand not come. SK 40, 40 places for tool in tool changer, 16 bar coolant thru spindle. Hsdew Rqq Topfx Aicjnk

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Hnodpeufp Svofx Aicek

Condition: good (used), Year of construction: 2006, X 1000 mm , Y 600 mm Parts shown by hand not come. Hsdpfju Dmy Djx Aiconk

Condition: good (used), Year of construction: 2010, AWEA 1250, 15.000 rpm coolant thru spindle, Tool changer 40 places Parts shown by hand not come. Hnjdpfjxu Ew Usx Aicok Machine vices, plate on table not come with machine.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: Hnodpfxju Ivkge Aicjk - See attached OC (order confirmation) Technical data automation: - Available, on request.