Used Bending Machines / Angle Bender for sale (68,272)

Condition: excellent (used), Year of construction: 2011, pressure 22.0 t flat steel 120 x 15.0 mm ST stroke 200 mm working feed 8.0 mm/sec return speed 30.0 mm/min work height max. 925 mm table: 630 x 1100 mm motor 400 Volt 50 Hz total power requirement 1.5 kW weight 630 kg range L-W-H 900 x 1200 x 920 mm Description: - Electro-hydraulic horizontal bending machine - Cylinder located beneath the worktable â?? hydraulic stroke adjustment of the carriage - Solid worktable made of hardened steel - Large, unobstructed work surface - Machine made of hardened and ground forged steel - Micrometric adjustment of the working stroke via a hydraulic valve using handwheels on the front of the machine - Continuous adjustment, even at maximum operating capacity, so that the desired bending angle is achieved without trial and error - Thanks to this system, the machine is suitable for both the production of prototypes and large-scale series production - Feed speed adjustment via a manual control valve - Die pins made of hardened, alloyed steel, with quick-change mechanism - Lubrication via manual pump Redpsznnhiofx Ab Eocd - Control via electric foot pedal and accident-preventing hand-protection push buttons with timing function - The GREEN TECHNOLOGY system automatically shuts down your bending press during temporary periods of inactivity Scope of delivery: - Central lubrication system - 1x freely movable foot pedal - Side stop bar, 500 mm - Handwheel for adjusting the piston stroke - Bending tools - Operating instructions (PDF)

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Rcsdpfx Abjummkaj Eod Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor Rodpfxeq Sz Aho Ab Ejcd - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Rjdpfx Abjhmmfko Eocd Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Rcsdpfxettc Uao Ab Eod

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Rjdpjmck Rysfx Ab Escd Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Rodpfsxpqy Dex Ab Escd Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Rjdjya Iaqopfx Ab Eocd Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm Rjdpfx Aboznn Hle Escd - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Redpjzl Dngofx Ab Escd Upper wheel diameter: 150 mm Motorized rear roller delivery Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons Rcsdpfx Aev Htnijb Eed The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Rjdjvk Scgepfx Ab Eecd Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 Rcedpfjzbcwmjx Ab Esd The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Redpfx Aszfvvvob Ejcd Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Rcodpfjza D U Dsx Ab Eed Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Rcodpfx Abox Ii Hve Eod Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Rcedpfx Aezp Raqjb Eod Year of manufacture: 1994 Technical data Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW Rsdpfx Aex Dtt Aob Eecd CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Redpfjxwmb Hjx Ab Eecd Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while simultaneously offering the lowest overall operating costs. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 21015 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Condition: NEW, showroom machine Availability: 12-14 weeks Performance: Rjdpfx Absxnnf Ie Eecd Working width 2100 mm Round bending capacity 12 mm Pre-bending capacity 9 mm Standard equipment: • Variable oscillation adjustment of the side rolls VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touch control panel including high-end BENDtronic® control • Infinitely adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electro-mechanical locking system for the rotation of the top roll • Automatic pressure adjustment of the bottom roll • Automatic pressure compensation of the bottom roll cylinder, standard cooling system for ambient temperatures up to 35° C • Automated axis optimization • Automatic shutdown of the hydraulics for the roll position • Ultra-compact design to reduce or even eliminate foundation costs • Safety emergency stop cord Optional equipment: • Two-roll drive for the top and bottom rolls • Taper bending device for bending conically shaped workpieces • Extended cooling system for ambient temperatures up to 45 °C • Upper support for easier bending of large diameters • Side support to assist in bending large diameters • Gas pressure accumulator for calibrating already welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick change of top rolls • Interchangeable top rolls with different diameters for bending shots with small diameters • Hardened rolls if black and stainless material is to be bent • Infeed roller table for easy feeding of sheets into the machine • Centering device for the infeed roller table, for automatic centering of the sheets before bending Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your needs. Further information on request.

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Rjdpfsyx Eriox Ab Eocd

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. ca. 190 mm Rcodpszkbn Isfx Ab Eed roll diam. toproll 140 mm bending speed 3.0 m/min engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Rodstr U Hlspfx Ab Eecd PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Rsdpow D Uqxjfx Ab Ejcd Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Redpfx Aowwt Hfob Ejcd Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Rollers for 1" pipe Straightening rollers Operator's key Operating manual