Used Adige Sys Sheet Metal Processing Center for sale (57,939)

Condition: used, Load capacity: 3 t Hsdpfx Aiob Nwkxocjnk Opening width: 38 mm Weight: 15 kg

Condition: new, functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 6,400 mm, throat depth: 1,250 mm, bending angle (max.): 140 °, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, foot remote control, Hydraulic folding machine, capacity 2.00 mm steel Electric shear, capacity 2.00 mm steel Curved upper beam Tapered back gauge with motorized fingers Special back gauge for small parts Hodpfxsyztlvo Aiconk LED lighting under the upper beam Automatic crowning

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: Hnsdpfx Ajy Ddh Tjicek - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm Hodpoy Ddf Esfx Aicjnk number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Hsdjy Ar A Nspfx Aiconk Highlights & Features: Precision: Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Wet grinding binds grinding dust and increases safety in the production process. Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2013, axis stroke (X,Y,Z) unbegrenzt x 1000 x 60 mm Number of spindle head vertical 10 St. Number of spindles head horizontal 6 St. Dust suction hood 150 mm Number of milling agregates 1 St. Hodpsyxhh Tofx Aiconk Boring power 1,7 mm Speed of boring spindles 4000 U/min. Required air-pressure 8 bar Weight 1300 kg Dimensions (L/W/H) 1990 x 2410 x 1510 mm

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours Hnsdpfx Aijyb Hu Njcok ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SN061856, 12-month warranty Hnodpfx Asy Ar Dgsicok

Condition: used, Machine is in fully working condition. Hnedpfx Aiohm S Dgecsk

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, total length: 1,100 mm, total width: 1,320 mm, total height: 1,050 mm, input frequency: 50 Hz, Sheet Pan Cleaning Machine KD-Putz Tubur Premium Hedeyv U Nfepfx Aicjnk Sheet cleaning machine for baking trays / perforated sheets short side raised stainless steel construction with oiling unit & sheet pan trolley Connection: 400V, 16A-CEE plug Dimensions: 1320 x 1100 x 1050 mm (W x D x H) Used machine from bakery

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, Sheet Pan Cleaning Machine Jeros 5015/828 Hjdpfx Aieyaklcjconk for 2-edge baking trays short side raised stainless steel design with oiling system DGUV V3 tested exclusively by us Connection: 400V, 16A-CEE plug Used machine Visit us!

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW 3 & 4 Edge Sheet Cleaning Machine NEW NEW Single-operator control Stainless steel design, mobile Maximum sheet size: up to 600 x 800 mm Pull-out collection tray at the bottom Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of the tray/sheet cleaner is also evident in its ability to process 4-edge trays with edge heights up to 24 mm. Contaminants are collected in a pull-out, easy-to-empty tray located beneath the cleaning unit. The machine is fully mobile and can be effortlessly moved to any desired location after use. The entire frame is shot-peened, creating surfaces that are as smooth and hygienic as possible. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand-new machine with warranty + spare parts service Hedpfxow S Slns Aicsnk Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet cleaning up to 600 x 1000 mm Sheet greasing/oiling Service package Delivery service Commissioning & training Visit us!

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Electrical: Hnsdpfxoyu Tfhe Aicsk Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Condition: used, Year of construction: 2002, used, excellent condition, lightly used, school machine Manufacturer: Weeke Model: BHC 250 Hodpfx Aieyztzwjconk Travel range x-axis: 2310 / 2100 mm Travel range y-axis: 1010 / 800 mm Travel range z-axis: 135 mm Tool changer: 5-fold Extraction connection: 160 mm Space requirement approx. 4100 x 3100 x 2000 mm Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without guarantee or warranty

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Model KSM 5 / 2500 Year : 1999 Capacity : 2520 x 5 mm. Hnsdsyx Epbopfx Aicek INIOP NC control (Swiss made) Manual back gauge

Condition: new, Year of construction: 2026, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week Hsdpfx Aeg In Azoiconk We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment Hsdpfx Aet Ac D Uoicsnk - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Hedpoucw Rbefx Aicsnk The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 150 mm, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This F1200 has only been used as a showroom model and is therefore almost new. The machine can be viewed at our showroom in Bergeijk. Hsdpfx Aieyt Npyecsnk Discover the advanced F1200 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operator errors. Depending on the material to be processed, you can opt for a vacuum or magnetic support system. At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating comb brushes that apply light pressure. The brushes provide uniform rounding of all edges and holes, both on the periphery and on the flat-ground product, resulting in the most optimal finish. Additionally, the F1200 is also available in an XL version, which adds a fourth station. This station includes a second grinding unit that allows you to apply a line finish using a finer abrasive belt or finish with a scotch-brite belt. The F1200 offers options for automatic brush calibration, ensuring consistent accuracy, as well as full ERP control and flawless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Hnodpfx Aieyt Nm Ejcjk Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. Hnjdpfx Aoyt Nhvsicjk The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS based in Sindelfingen. Device features: RAS Folding Bench Capacity: 2.5mm steel – more for aluminum Bending length: just over 2 meters Front-adjustable depth stop, also excellent as a sheet support Hand and foot switches The machine comes from a reputable company and was professionally inspected again prior to sale Weight: see picture Hedpfexqpiyox Aicsnk Optionally, there is also a segmented clamping beam from RAS in stock Invoice with VAT shown separately Shipping by freight forwarder can be arranged if desired Free loading as shown in the pictures Viewing and testing possible by telephone appointment. Payment in cash upon collection – if there’s anything else I can do for you, please give me a call – thank you. Collection should take place within 8 days after the auction ends. Location: 97261 Güntersleben

Condition: ready for operation (used), You are bidding here on a folding machine (press brake) from the well-known German manufacturer Biegemaster. Hnodpfsykbu Nox Aicok Device features: - Bending length: slightly over 6 meters - Sheet thickness: 1 mm for steel, approx. 1.5 mm for aluminum - Adjustable angle (see photo) - Emergency stop - Sheet support - Hand and foot operation (professionally retrofitted) - Rotary shear - Advantage of this design: already folded sheets can also be edged again from the side - Free loading possible - You will receive an invoice according to §25a UStG - I can arrange forwarding agents if requested Free loading as shown in the pictures. Inspection and testing are possible by appointment over the phone. Payment in cash upon collection – if you need anything else, please give me a quick call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only served as a showroom model and is therefore as good as new. You are always welcome to visit our showroom in Bergeijk for a viewing. 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products ranging in size from a one-euro coin up to 200 mm wide can be processed on this powerful compact unit. Burrs and imperfections are removed at the infeed side by a grinding unit, resulting in a smooth, burr-free surface. This is followed by two oscillating combination brushes applying light pressure. The brushes ensure uniform edge rounding of all sides and holes, both around and within the flat-ground product, leading to optimal finishing quality. The F200 XL offers features such as automatic brush calibration to guarantee consistent precision, full ERP control, and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction unit and accompanying ductwork. Only available while stocks last. The machine is supplied with one year warranty excluding wear parts. Delivery ex-works Bergeijk. If required, we can also supply the machine including transport, installation, and operator training at your location. The machine can be viewed in our showroom in the Netherlands. Contact us and we will send you an attractive offer. Hjdpfx Ajyt I U Ueicsnk

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove Hjdpohmmfkefx Aicenk - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition