Used Wika Manometer for sale (218)

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left Njdjx Suzaepfx Akislh * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Year of construction: 2014, condition: ready for operation (used), overall weight: 4,000 kg, total width: 1,300 mm, total height: 2,200 mm, product length (max.): 2,540 mm, Metal Band Saw manufactured in 2014. This JAESPA Classic 423 DGH features a heavy steel construction and a low-vibration grey cast iron saw band table. It includes an NC control system with a 9-inch colour touchscreen for cutting program management and automatic positioning for mitre cuts. If you are looking to get high-quality cutting capabilities, consider the JAESPA Classic 423 DGH machine we have for sale. Contact us for further details. Nljdpfozzavxjx Akieh - Saw Frame Construction: Heavy steel construction, double-mounted close to the saw band, precisely guided by a hydraulic feed cylinder- Saw Band Table: Low-vibration grey cast iron with a machined surface and T-slots- Control System: NC control with 9-inch colour touchscreen for preselection and control of cutting programs (cutting lengths, piece counts, band speed, and angular position)- Mitre Cuts: Automatic positioning of the saw frame for mitre cuts on both sides between 30° and 90°- Upper Saw Band Guide: Automatically self-adjusts to the required workpiece height- Operating Modes: "HAND" for single cuts and "AUTO" for fully automatic series production cuts- Material Transport: Motorised feed (pliers vice / Zangenspannstock)- Material Clamping: Hydraulic clamping via short-stroke cylinders on both sides of the saw band- Saw Band Drive: Infinitely variable control via a frequency-regulated electric motor- Band Tensioning: Regulated mechanically via disc springs and monitored via manometer- Saw Band Length: 4570 mm- Net Weight: Approx. 4000 kg (incl. 3000 mm roller conveyor)- Dimensions (Required Footprint): 1300 mm x 2540 mm (without roller conveyor)- Height: 2200 mm- Additional Equipment: Electrically powered chip brush, generous coolant tank with integrated chip collection container, 3000 mm roller conveyor

Condition: used, Year of construction: 2022, Übersicht Njdpfx Akoxhf Sfoiolh Dieses Sudhaus wurde 2022 von der chinesischen Firma JingYing gebaut. Es wird verkauft, da die aktuelle Brauerei erweitert wird. Es handelt sich um ein dampfbeheiztes 3-Gefäß-Towersudhaus in sehr gutem, gepflegtem Zustand. Die Anlage wird mit Funktionsgewährleistung bei Lieferung angeboten und ist sofort verfügbar. Technische Daten - Ausschlagwürze: 10 hl pro Sud - Konfiguration: 3-Gefäß-Sudhaus (Maisch-/Würzepfanne, Läuterbottich, Whirlpool) - Heizsystem: Dampfbeheizt - Steuerung: Halbautomatische SPS (Steuerung von Pumpen, Heizung, Rührwerken, Temperaturprofilen, Rezepteinwahl) - Gärung: 10 zylindrokonische Gärtanks à 20 hl (2 bar, Kühlmäntel, CIP-Kugel, Manometer, Probenahmeventile) - Kühlung: Kälteaggregat 6 HP (~4,5 kW mechanisch, ~12–18 kW Kälteleistung), Wasser-Glykol-System, Bereich −4 bis +10 °C - Dampferzeuger: Elektrisch beheizt, 72 kW (≈1 °C/min für 10 hl Wasser) - Zusatz: Kaltwassertank 30 hl (isoliert, Kühlmantel), Malzmühle 300 kg/h, CIP-Armaturen, Tri-Clamp-Fittings, Schläuche, Ventile, Dichtungen, Probenahmeventile - Erweiterung: 10 Magnetventile (je eines pro Gärtank, automatische Einzelkühlung über gemeinsamen Glykolring) - Sudhaus - Durchmesser Maischpfanne/Läuterbottich 1460 mm - Gesamthöhe inkl. Schaltschrank/Steuerung 2860 mm (Das ist der Höhste Punkt der Anlage) - Podesthöhe 1100 mm (Hier lässt sich die Bedienerbühne leicht kürzen wenn nötig) - ZKT's 10 x 20 hl - Durchmesser 1510 mm - Gesamthöhe 3300 mm Lieferumfang - Sudhaus | JingYing | 10 hl, 3-Gefäß-Towersystem | 2022 | Dampfbetrieben, SPS-Steuerung - 10x Gärtanks | JingYing | ZKT 20 hl | 2022 | 2 bar, Kühlmäntel - Whirlpool | JingYing | 10 hl | 2022 | Mit tangentialem Einlass - Kaltwassertank | JingYing | 30 hl | 2022 | Isoliert, mit Kühlmantel - Malzmühle | JingYing | 300 kg/h | 2022 - Dampferzeuger | JingYing | Elektrisch, 72 kW | 2022 - Kälteanlage | JingYing | 6 HP (~12–18 kW) | 2022 | Wasser-Glykol-System −4 bis +10 °C - Podest & Verrohrung | JingYing | — | 2022 | Mit Pumpen, Schaugläsern, Ventilen, CIP-Armaturen - Zubehör | JingYing | — | 2022 | Tri-Clamp-Fittings, Schläuche, Kupplungen, Dichtungen - Magnetventile | JingYing | — | 2022 | 10 Stück, für Einzelkühlung der Gärtanks

Condition: used, mileage: 10 km, first registration: 12/2024, color: orange, Your specialist dealer with expertise, service, and advice offers you: SCHMAILZL gully cleaner for Multicar, other vehicle manufacturers, and trailers (the attachment is offered without vehicle) Net price: €14,550 plus 19% VAT. (New device with 12-month manufacturer’s warranty) Base unit type SKR II - Painted in RAL 2011, including: - Adjustable frame (1.2–2.0 m wide) with lifting and emptying device - Swivel device with cylinder and chain suspension for manhole covers - Lifting winch (lifting capacity approx. 150 kg) - Hydraulic vibrator – cover lifter Nedpfx Aksvvp Rxjielh - Wind protection – fastening materials - Net weight approx. 300 kg The very simple operation and ergonomic working process make this affordable device, in combination with a tipper vehicle, a genuine alternative to conventional methods. Additional advantages: - Low fuel consumption as operation is almost at idle speed - Mounting and dismounting take only a few minutes, important for changing assignments - Emptying 150–300 silt boxes per day is possible - Emptying without water addition thanks to hydraulic vibrator - The unit can be installed on various vehicles using the telescopic frame The following requirements must be met by the carrier vehicle: - Hydraulic connection 20–30 L/min, 150 bar - Free return line, size 15 - Lashing eyes on the tipper platform Optional equipment for vehicles or trailers without their own hydraulic drive: Petrol hydraulic unit consisting of: Petrol engine 9 HP/6.7 kW, 20 L/min at 2400 rpm, 8.4 cm³/rev gear pump, manometer, 40-liter tank with oil level indicator and damping mount Dimensions: approx. H 80 x W 65 x D 55 cm, weight: approx. 70 kg Net price: €4,350 plus 19% VAT. Assembly, shipping, or delivery available on request. On request, we are happy to offer complete packages with vehicles, also available in right-hand drive versions. We also gladly provide an offer for the installation or retrofit of your vehicle with the demountable tipper body including a DEKRA main inspection report for the conversion. Errors, changes, and prior sale reserved. Our Terms and Conditions apply. Take advantage of our many years of experience in sales and service and let us prepare an individual offer for you. Make use of our leasing and financing options as well. We promise competent advice and support from our qualified staff. You will find further offers from the commercial vehicle manufacturers MULTICAR, ISUZU, and PIAGGIO as well as an extensive range of attachments at Tel.:

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Nedpfxsz Spgpo Akiolh Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. Nedjylnwyjpfx Akijlh FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: used, machine/vehicle number: 0000622128, EWM Titan XQ 400 puls DW Compact, used Model: Titan XQ 400 puls EMC class: A Minimum welding current (A): 5 Maximum welding current (A): 400 Duty cycle at 40°C: 400 A / 80%, 370 A / 100% Open-circuit voltage: 82 V Mains voltage: 3 x 400 V Voltage tolerance: -25% to +20% Recommended generator power: 23.8 kVA Mains frequency: 50 Hz / 60 Hz Cooling capacity: At 1 l/min: 1000 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 Dimensions: 1150 mm x 678 mm x 972 mm Multi-process pulse MIG/MAG welder with all welding characteristics and processes, non-compact, non-modular Drive XQ and Drive XQ HP wire feeders Swivel console for wire feeder "blueCool" coolant down to -10°C (14°F), 5 l, 5 l Interconnection cable set, water-cooled, 14-pin, 1.8 m Adapter for B300 basket spool MIG/MAG function torch, with OLED graphic display, water-cooled, X-technology, 4 m Ground cable with screw clamp, 450 A / 60%, 70 mm² Nljdpeyngdwjfx Akioh Pressure regulator with manometer, 30 l Mains plug, installed

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge Nsdpfx Akjy N Duqeijlh - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation Nljdpfsz Sltwox Akieh

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth Nodpfx Akoyw Thvsislh

Condition: used, H. KÖHLER GmbH Nlodpfxozhadce Akijh Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Nlodpfx Ajzg U Tijkioh Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Nljdpjy R Aldsfx Akieh Filtration area: Main filter – 21 m² HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Nlsdpfx Ajy A Tpqskieh Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: used, LDS Shaker Spare Parts / Vibration Testing System Accessories LDS V8-440 / HBT750C Spare Parts and Accessories Package 30 individual parts – sensors, filters, cables, and mechanical spare parts Mostly individually packaged and visually in new condition For sale is a comprehensive spare parts and accessories package from the inventory of an LDS V8-440 / HBT750C vibration testing system. The collection consists of various spare parts for electrodynamic vibration testing systems, including filter elements, pressure sensors, connecting cables, and mechanical components. Nodsz Spt Hjpfx Akislh Depending on compatibility, the parts are suitable as a stock of spare parts for the maintenance, repair, and servicing of suitable shaker systems. Technical Data / Parts List: Manufacturers / Brands: LDS, BD Sensors, WIKA, and HYDAC Equipment Type: Shaker Spare Parts / Vibration Testing System Accessories Original System Assignment: LDS V8-440 / HBT750C Total Scope: 30 individual parts in 15 positions LDS Filters and Filter Elements: 4x LDS V300232 – Filter mats 25 x 25 mm 2x LDS V500133 – Filter elements for vibrators 1x LDS V500135 – Filter element for HBT sliding table 1x LDS V500131 – Oil filter for LPT 1x HYDAC 1260880 / 0030 D 020 ON – Hydraulic filter LDS Mechanical Spare Parts: 2x LDS V300089 – Target / Reference element for V8/V895 1x LDS V300087 – Target / Reference element 1x LDS V300135 – Steel bushing / ball joint 1.5 inches 1x LDS V300666 – Steel guide shaft for shaker armature 2x LDS V300122 – Spare parts, exact designation unknown Sensors / Pressure Measurement Technology: 5x BD Sensors DMP 331 – Industrial pressure transmitters 1x WIKA S-2631301 / P.8392006 – Pressure sensor / pressure transmitter Connecting Cables / Wires: 1x LDS V300187 – Electrical connecting cable 1x LDS V300186 – Grounding connecting cable 6x Shaker receiver cables – signal and connecting cables Features / Special Characteristics: Extensive spare parts inventory Original part numbers on numerous packages Several filter elements for vibrators and sliding table Pressure transmitters from various manufacturers Electrical connecting and signal cables Mechanical spare parts for shaker systems Mostly individually packaged components Application Areas: Electrodynamic vibration testing systems LDS shaker systems Maintenance and servicing Spare parts supply Vibration and shock testing technology Hydraulic and pressure measurement technology Industrial testing systems Compatibility: The spare parts package comes from the environment of an LDS V8-440 / HBT750C vibration testing system. Individual packages show additional model designations such as V8/V895, V810, or V850. The actual suitability and compatibility of the respective spare parts should be checked before use using the part numbers and technical data. Condition: Used stock / Used Mostly individually packaged Visually in new or unused condition Functionality testing of the sensors is not documented Optical condition according to images Scope of Delivery: 1x complete LDS shaker spare parts and accessories package 30 individual parts according to the listed parts list Accessories as shown in the images The table or other items not explicitly mentioned in the photos are not included in the sale. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Nljdpfx Aezmcn Uokieh Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Nlodpfxsw N N Arj Akieh Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition.

Condition: used, Year of construction: 2024, Optimum Optisaw SD500AV – Vario Bandsaw with Siemens Inverter Used bandsaw with signs of wear Heavy-duty industrial design Smooth, low-noise operation Manual or semi-automatic operation Infinitely variable saw band speed from 20–80 m/min High cutting precision due to vibration-free running Mitre adjustment from -45° to 60° by swivelling the entire saw bow Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic shut-off Coolant pump Ball bearing saw band guide with carbide inserts for optimal cutting results Easy setting of descent speed via feed rate control valve on the control panel Large, hydraulically operated quick-action vise, self-closing, laterally adjustable Manometer for correct saw band tension Clearly arranged control panel Semi-automatic operation functionality: Closing of the vise and activation of the motor Lowering of the saw bow for cutting Stopping of the motor and return of the saw bow to its home position Dimensions and weights Length approx.: 2129 mm Width/depth approx.: 1046 mm Height approx.: 1687 mm Weight approx.: 645 kg Electrical data Output (motor power): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Nlsdpfx Akex Dzv Ejish Total connected load: 3.8 kW Supply voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 20–80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle range: -45 to 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Continuous real-time data acquisition: Yes Data storage location: On device Data access: Via wireless interface Cutting capacities 0° round (solid): 355 mm 0° square (solid): 300 mm 0° rectangle upright (solid): 300 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° rectangle upright (solid): 250 x 250 mm +45° round (solid): 350 mm +45° square (solid): 290 mm +45° rectangle upright (solid): 290 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° rectangle upright (solid): 180 x 220 mm Explanation cutting capacity: Cutting capacity determined with aluminum based on saw bow weight. May vary when processing different materials and may be smaller in certain cases (this is not cutting capacity in the strict sense).

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Worldwide delivery / Dealer inquiries welcome! Internal number: #646 The images are example images. Actual equipment and color may vary. Nsdjzit Uqspfx Akijlh STS V-1.5 Vacuum Tank Trailer Tank * Tank capacity 1,500 liters * Tank hot-dip galvanized * Tank slightly tilted backwards for easier cleaning * Side flushing opening in the tank to remove contaminants or blockages without opening the tank lid * Tank lid can be opened completely to the passenger side and secured with hook screws * 2 safety levels installed as standard to prevent damage to the compressor * Syphon separator * Overflow with 2 balls and sight glass * Manometer on vacuum line with protective bracket * Mechanical level indicator with color scale Engine and Compressor * Vacuum compressor MEC 3000 with 3,500 liters of air capacity * Vacuum max. -0.8 bar (continuous operation at -0.5 bar) * Overpressure max. 0.49 bar * Maintenance-free V-belt drive for vacuum compressor * Industrial engine (gasoline) * Electric starter, oil sensor, control panel with ignition switch, battery and tank * Internal intake hose to avoid protection within the engine unit * Muffler for vacuum compressor with oil collection * Heat-conducting sheet made of stainless steel above the exhaust * 1 liter of biodegradable compressor oil stored in an oil bottle holder * 5 liter gasoline canister in holder * Standard funnel with long neck for changing and refilling engine oil * All engine-related components and accessories are housed in a lockable engine box * Engine box made of aluminum and powder-coated in the desired color Chassis * Self-supporting chassis, completely hot-dip galvanized * Low-loader tandem chassis 2.7t * Track width identical to passenger cars and Sprinters for optimal driving * Lowest possible center of gravity of the suction tank * 2 axles with 1,350 kg load capacity each and independent wheel suspension from a well-known manufacturer * Continuous welded V-drawbar * Sturdy fenders with metal lamp housing * Lashing brackets for quick securing of the suction hoses using rubber bands * Storage option for tools and accessories Suction Tank * Overrun brake with return mechanism * Automatically locking ball coupling * Support wheel reinforced * 13-pin cable connection Connections and Hoses * 2x Suction hoses (3") 5m long with Perrot couplings * 1x Suction lance 3" (1500mm long) * 1x Perrot connection (3") in the tank lid at the bottom * 1x Perrot connection (3") on the side, on the right in the direction of travel For more detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: used, maximum load weight: 33,620 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,800 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5669 Approx. 48m³ Benalu Tipper Semi-Trailer with Swing Tailgate and Smooth Sidewalls / Also available for rent with purchase option ---- * Manufacturer: Benalu * Model: Agriliner FL 8800 * First registration: 09/2025 * Gross weight: 39,000 kg * Unladen weight (as per registration): 5,380 kg * Payload: 33,620 kg * Axles: 3 x Jost with 1st axle as lift axle and traction aid * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R 22.5 on Speedline satin-finished aluminium rims Nljdpfx Aoy Hn Naokioh * EBS Wabco * Colour: Chassis RAL 9006, tipper body RAL 9006, tarpaulin grey * Main inspection (TÜV): 09/2026 * Capacity: approx. 48m³ (8.80m long x 2.41m wide x 2.20m high) * Swing tailgate * Central grain discharge chute * Individual wheel arches * Aluminium landing legs (full load) * Folding underrun protection * Automatic lowering when tipping * Load manometer * LED work lights * Grain funnel with dust bag * Rolling tarpaulin with tension straps * Internal access at front left of semi-trailer * Water tank * Operator platform at front with left-hand access * 3.5m aluminium access ladder at front right under chassis * 1 owner German vehicle!! German documents!! Rental with purchase option possible!! Notice regarding possible errors in this listing: Despite careful preparation of this advertisement, errors in the text or specifications may occur. We do not accept liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify additional questions.

Condition: excellent (used), functionality: fully functional, Frey F-LINE F222 Vacuum Filler with Loader and Integrated Grinder Attachment Brand: Frey Model: F-LINE F222 Grinding system: Integrated grinder (mincing attachment) at the outlet, allowing simultaneous grinding and filling of the product. Loading system: Integrated mast-type hydraulic lift for standard 200-liter meat trolleys. Equipment: - Large, conical loading hopper. - Integrated control panel with digital display and numeric keypad. Nljdpoyku Ucefx Akioh - Analog pressure gauge (manometer). The Frey F-LINE F222 in this configuration is a complete production center for demanding meat processing facilities. Thanks to the use of the grinder system, the machine not only fills but also performs final mincing of the product directly before it enters the casing, ensuring excellent filling structure and improved color. The inclusion of a hydraulic mast loader significantly increases work efficiency by eliminating manual feeding of material and optimizing internal logistics within the facility.

Condition: used, Kärcher Hot water high-pressure cleaner / steam cleaner Kärcher HDS 1195 S Eco Up to 180 bar working pressure and 1,200 l/h flow rate Hot water and steam operation up to 155 °C For sale is a used hot water high-pressure cleaner from the manufacturer Kärcher. The Kärcher HDS 1195 S Eco is suitable for professional cleaning tasks in industry, trade, and commerce. The combination of high working pressure, hot water, and steam operation allows even stubborn soils as well as oil and grease residues to be removed. Technical data: Manufacturer: Alfred Kärcher GmbH & Co. KG Type: HDS 1195 S Eco Article number: 1.028-337 Equipment type: Hot water high-pressure cleaner Country of manufacture: Germany Mains connection: 400 V / 3~ / 50 Hz Connected load: 8.2 kW Fuse rating: 16 A slow-blow Nedpfjz R Skyox Akielh Protection class: IPX5 Working pressure cold/hot water: 30–180 bar Maximum permissible pressure: 198 bar Flow rate: 600–1,200 l/h Flow rate steam operation: 600 l/h Working pressure steam operation: max. 28 bar Hot water temperature: max. 98 °C according to the data plate Steam temperature: max. 155 °C Burner output: 103 kW Fuel: Diesel or heating oil EL Maximum heating oil consumption: 8.3 kg/h Fuel tank: 25 liters Detergent tanks: 20 + 17 liters Maximum water inlet temperature: 30 °C Required water inlet flow rate: min. 1,500 l/h Dimensions (L × W × H): 1,285 × 690 × 875 mm Net weight: 155 kg Gross weight: 185 kg Equipment: Hot water and steam operation Pressure and flow rate regulation Continuously variable temperature control Detergent dosing valve Integrated fuel tank Two detergent tanks Manometer for pressure indication Indicator lights for operating states Mobile unit with transport rollers Hand spray gun and spray lance as shown in the pictures Application areas: Industrial cleaning Machine cleaning Vehicle cleaning Workshop cleaning Construction machinery cleaning Agricultural operations Cleaning of production plants Removal of oil and grease Cleaning of heavily soiled surfaces Commercial and industrial applications Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Visible corrosion spots on the control panel Scope of supply: 1x Kärcher HDS 1195 S Eco hot water high-pressure cleaner Hand spray gun and spray lance as shown in the pictures Other accessories as shown in the pictures Shipping or forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions on the telephone.

Condition: used, Julabo Type: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Top condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a powerful industrial cooling unit for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are working, and the display and controls operate perfectly. Typical applications: Machine and process cooling Laboratory and testing technology Plastic, laser, or system cooling Highlights: Robust industrial design Digital temperature display External control (RS232) Alarm connection Wheels for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Filling quantity: 1.625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: -20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): approx. 1.3 kW at -20 °C approx. 5.5 kW at 0 °C approx. 7.4 kW at +20 °C Connections & equipment: Inlet and outlet (industrial connections) Manometer Shut-off valve RS232 interface Alarm contact (max. 30 V / 1 A) Wheeled chassis Njdpfx Akozix D Dsielh Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.) Dimensions (H x W x D): approx. 1050 x 550 x 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: Julabo FLW7006 recirculating chiller Connection cable Shipping method: Freight shipping on a pallet (upon agreement, shipping costs depend on the destination) Pickup: possible by appointment. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: GSL, pressure gauge with measuring hose -Type: 0 to 250 bar -Screw connection: see photos Nlodjv Rnlqopfx Akioh -Number: 30x manometers with measuring hose available -Price: per piece / from 2 pieces 40,- €/piece. -Transport dimensions: Ø 68 x 200 mm -Weight: 0.3 kg/piece

Condition: used, mileage: 1 km, first registration: 11/2025, fuel type: diesel, color: white, gearing type: automatic, Year of construction: 2025, Equipment: all wheel drive, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ KRÜGER Hose Dumper on HINOWA Track Chassis (Diesel) - TOP Demo Unit High-pressure hose reel – 200 m DN25 Designed for 200 m DN25 rubber hose (high-pressure hose included) * hydraulically driven * stepless speed adjustment of the flushing hose * manual freewheel * automatic hose guidance system using a cross-lead spindle * double roller window 1” * high-pressure water manometer * Hydraulics Operation – Hydraulic hand levers Support shield up/down * Flushing hose up/down * Flushing hose speed slow/fast Hydraulic equipment Control valves Chassis – Carrier vehicle Nljdpfx Aexc Szvskijh Manufacturer: Hinowa / Type: Track chassis HS701Standard – White For further detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our general terms and conditions and with the exclusion of any warranty.