Used Uwm Center Lathe for sale (18,003)

Condition: good (used), Year of construction: 1988, Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum turning diameter over compound slide: 200 mm Gbedpfxez Hylbs Aiveu Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm.

Condition: good (used), Year of construction: 1986, Muller lathe, model 1500 Gsdpfszuvxcox Aivsbu - Max. turning diameter: 700 mm - Distance between centers: 1500 mm - Bore diameter: 72 mm - Year of manufacture: 1986 - Rapid traverse rate on the Z-axis (cross slide)

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Godpozy Im Nofx Aivobu Distance Between Centres 4000mm (157"). Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Weight Approx: 6000KG

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW Gedpjy Tyyqofx Aivobu bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Godpfxox D Uf Tj Aivsbu Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1971, Center lathe, manufactured by VOEST ALPINE, type DA 210, year of manufacture 1971. Chuck: 315 mm, tool holder: Multifix B with 2 tool pockets. Godpfx Aiez Eilnjvjbu Center height: 210 mm Distance between centers: 1000 mm Spindle bore: 46 mm Spindle speeds: 28 - 2000 rpm Further details can be found in the data sheet. Machine in good, ready-to-use condition. Machine documentation available. Weight: approx. 1200 kg

Condition: used, Broadbent - Schofield Gap Bed Centre Lathe. Distance Between Centres Approx 5M (16ft). Swing Over Bed 35". Swing in Gap 55". Spindle Bore 4 1/2". Spindle Speeds 7 - 500rpm. Leadscrew 2 TPI. Taper Turning Attachment. Bison 800mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Digital Readout & Tooling & 2 Rear Splash Guards. Gbjdpfx Aiezy Ipqjvju

Condition: excellent (used), functionality: fully functional, Weiler high-precision lathe, model Condor 81, center lathe with 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture: 1982, Machine no. 82 016 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake: can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 1 three-jaw chuck, 160mm, 1 set of jaws >> Mulifix size B with 1 steel holder Gedpfx Aez Ehzzeivjbu >> Change gears >> Electronic spindle protection >> Back panel >> Coolant system >> Machine feet At an additional cost: Collet chuck system, new, and collets, new, from 3 to 26 mm in 1 mm increments. About the machine: Offered is a used Weiler Condor 81 in very good condition. It comes from a training center and has been well maintained. The machine is fully functional, of course. It is a very robust and powerful machine. The new 3-axis digital display from K&C makes the work even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), functionality: fully functional, + Multifix "A" baseplate + Three-jaw chuck + Collets + Coolant pump Center height approx. 150mm Swinging diameter over support 160mm Gedpfx Aijz Hatlovobu Swinging diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 RPM Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (LxWxH): 150 x 70 x 150cm Weight: 600Kg

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Gedpfx Aiez D Hx Nsvebu Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 350100, spindle bore: 20 mm, turning diameter over bed slide: 200 mm, turning diameter over top slide: 120 mm, center height: 102 mm, feed length X-axis: 400 mm, quill travel distance: 90 mm, total length: 1,500 mm, total width: 510 mm, total height: 1,550 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 100 rpm, bed width: 130 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 100 rpm, type of input current: three-phase, overall weight: 660 kg, input voltage: 400 V, distance between centers: 450 mm, travel distance cross slide: 100 mm, Schaublin 102N-VM CF precision lathe in excellent condition, fully functional. Gbedpfsz E Dymex Aivou The machine has undergone a geometric inspection (inspection report available). Included equipment/accessories: - W20 collet set - 4-jaw chuck - Tripan tool turret with tool holder - 2 quick-change 6-jaw chucks - Drilling chuck - CCEA LED lamp - Gear set Machine available for viewing and testing at our premises in Switzerland. Price: CHF 29,900.– (excluding VAT) Loading and transport possible upon request.

Condition: used, Year of construction: 2015, functionality: fully functional, JESSEY CHAMPION CP 1540 VS Guide and Lead Screw Lathe Manufacturer: Jessey Type: Champion CP 1540 VS Gbedszminuopfx Aivju Year of manufacture: 2015 Condition: used Scope of supply: - Coolant system - Machine light - Machine feet - Documentation - Chuck jaws - Digital display - MultiFix B Further information available upon request.

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more Gbodsz A Tgqopfx Aiveu About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Gsdpfoy Ryrhox Aivebu Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: used, functionality: fully functional, spindle bore: 35 mm, well-maintained conventional lathe. Gedszzdnlepfx Aivobu

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Gbedpfx Aoxc In Ssivju Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: ready for operation (used), Optimum lathe D330 x 1000 SG -Distance between centers: 1000 mm -Swinging diameter over bed: 330 mm -Swinging diameter over cross slide: approx. 190–200 mm -Spindle bore: approx. 38 mm -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and cross, automatic -Thread cutting: Metric / Inch -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock: MK3 -Spindle: MK5 -Work light -Three-jaw chuck Gbedpfjztdv Tsx Aivsu -Multifix system with 1 steel holder -Machine feet -Chuck guard Dimensions: L x W x H 1.9 x 0.7 x 1.5 meters / Weight 700 kg

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale Gbodpfxsy Tyy Do Aivsu - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Gbedpfofmd Dhox Aiveu Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH

Condition: used, Year of construction: 1971, turning diameter over bed 400 mm turning diameter over slide rest 230 mm turning length 900 mm spindle bore 45 mm turning speeds 31,5-1000 U/min tailstock quill taper MT MK4 Gbodpfx Ajz N Hv Tsiveu total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,1 x 1,4 x 1,8 m Centre lathe with - 2-axis digital readout - Forkardt 200 mm 3-jaw wedge-bar chuck - Multifix size B - Lighting

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm Gbsdpfjztwwkjx Aiveu - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: refurbished (used), functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 90 mm, turning diameter: 630 mm, turning length: 3,000 mm, quill stroke: 200 mm, total length: 4,700 mm, total width: 1,420 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 18 rpm, type of input current: AC, overall weight: 3,600 kg, workpiece weight (max.): 1,500 kg, Lathe FAT TUR 630 x 3000 mm - Fully Overhauled (Like New Condition) For sale is a conventional universal lathe, FAT TUR 630M x 3000, which has undergone a complete overhaul. The machine is in technically and visually like-new condition and meets the highest precision standards. Work performed during the overhaul: • Bed & Guides: All guide rails of the machine bed were precisely ground. The support guides were re-aligned and scraped. • Bearings: Complete replacement of all bearings. • Mechanics: All gearbox housings were cleaned, gears were inspected, and seals were renewed. • Electrical System: Fully refurbished. • Geometry: The machine was leveled and checked according to the acceptance protocol (as per factory standards). • Appearance: Industrial coating RALK 6011. Technical Specifications: Conventional Lathe TUR 630 Main Parameters / Working Range • Turning diameter over bed: 630 mm • Turning diameter over cross slide: 380 mm • Distance between centers: 3,000 mm • Bed width: 433 mm • Max. workpiece weight between centers: 1,500 kg Headstock / Spindle • Spindle bore: 90 mm • Spindle speed range: 18 – 1,800 rpm • Number of speed steps: 21 • Spindle nose: DIN 55027 - No. 8 Tailstock • Tailstock spindle diameter: 90 mm • Tailstock quill stroke: 200 mm • Tailstock quill internal taper: Morse taper MK 5 Drive / Motor • Main motor power: 15 kW Feeds and Threads • Range of longitudinal feeds: 0.08 – 3.25 mm/rev • Range of transverse feeds: 0.04 – 1.62 mm/rev • Number of feed ranges (each): 42 • Rapid traverse – longitudinal: 4 m/min • Rapid traverse – transverse: 2 m/min Thread cutting range • Metric threads: 1 – 120 mm Gbodpfoz Izdbex Aiveu • Inch threads (Whitworth): 28 – 1/4 G/inch • Module threads: 0.25 – 30 mm • DP threads (Diametral Pitch): 112 – 1 DP _____ Dimensions and Weight (for length 3000 mm) • Machine weight (approx.): 3,600 kg • Dimensions (L x W x H): approx. 4,700 mm x 1,420 mm x 1,650 mm _____ The machine is ready for immediate use and can be inspected and tested under power at our location in Hilden. Delivery conditions: • Transport is not included in the price. • Loading onto your truck is included in the price. Delivery date: • Available immediately after agreement. Price: €36,500 plus VAT (net, ex works Hilden) Subject to prior sale. Please do not hesitate to contact us if you have any questions.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Gbsdpfsxp Hudsx Aivju

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 470 mm, spindle bore: 150 mm, turning diameter over bed slide: 750 mm, turning diameter over top slide: 470 mm, feed length Z-axis: 2,000 mm, spindle speed (max.): 1,030 rpm, Center height on the machine bed: 360 mm Width of the machine bed: 450 mm Width of the recess: 450 mm Gsdpsz Irayefx Aivjbu Maximum turning diameter on the machine bed: 750 mm Maximum turning diameter on the recess: 910 mm Maximum turning diameter on the carriage: 470 mm Spindle bore diameter: 150 mm

Condition: used, Year of construction: 1973, turning diameter over bed 630-640 mm Gbjdpfx Aeztfwreivou turning diameter over slide rest ca 380 mm turning length ca 2000-4000 mm total power requirement 15 kW weight of the machine ca. 7-8 t