Used Union Bft 90/3-1 for sale (105,060)

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Nlodpfxsw Ni Ibo Akioh

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Nsdpfou U Hvwex Akijlh Delivery of the machine to other EU countries is also possible on request.

Condition: used, spindle diameter 130 mm x-travel 3500 mm y-travel 2000 mm w-axis 900 mm taper ISO 50 total power requirement 18,5 kW Accessories: Faceplate and indexing head Nledpfx Aksyqtwveioh Including: Facing head Tailstock The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), ABB Robotics PS 90/6-79-P-LSS-4318 / 3 HAC 2848-1/1 motor SN: 004.8561610017, used, in good condition, 100% fully functional, scope of delivery as per photos. Nljdextv Twepfx Akioh

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: 12156, travel distance X-axis: 1,985 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,490 mm, spindle speed (max.): 1,250 rpm, workpiece weight (max.): 6,300 kg, TECHNICAL DETAILS Spindle diameter: 110 mm Drilling spindle speed range: 6.3 - 1,250 rpm (in 4 steps) Facing head speed range: 6.3 - 315 rpm (in 2 steps) Travel in X-axis: 1,985 mm Travel in Y-axis: 1,270 mm Travel in Z-axis: 1,260 mm (with tailstock 1,490 mm) Travel in W-axis (spindle longitudinal): 710 mm Travel in U-axis (facing slide radial): 250 mm Table size: 1,600 x 1,400 mm Table load capacity: 6.3 t Table rotation range: 360° Tool holder: ISO 50 Feed rate steps for table and spindle head vertical: 5 - 2,500 mm/min Nsdpfxezb Dqbo Akijlh Turning diameter for drilling max.: 630 mm Turning diameter for facing max.: 1,250 mm MACHINE DETAILS Control system: NC Control for program: Heidenhain 320 Total power requirement: approx. 90 kW Machine weight: approx. 30 t EQUIPMENT Tailstock Facing slide 700 Electronic handwheel Note: Currently, the machine has an electrical fault and requires repair!

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Nlodpfx Asz Hn Spskieh

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, number of digital displays: 1, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 3 mm - Roller diameter: 90 mm - Electrically adjustable follower roller - Digital display - Hardened rollers - Option for conical rolling - Rotatable top roller - Brake motor - Foot control Nsdpei E Tzqjfx Akiolh - Emergency stop - Documentation - 400V

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm Nledpfx Ajvr S Ulokioh control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: used, spindle diameter 130 mm x-travel 3500 mm y-travel 2050 mm z-travel 1050 mm spindle taper ISO 50 turning speeds 4-1120 U/min Feed 5-2000 mm/min bore spindle stroke 850 mm main drive motor 45 kW table surface area 1600x2000 mm Control Heidenhain type TNC 426 workpiece weight 12500 kg Nsdpfjyqr U Hjx Akielh 720 mm radial face slide travel 240 mm total power requirement 90 kW weight of the machine ca. 31,1 t dimensions of the machine ca. 6,5x5x5x4 m Turntable with digital display The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm Nlsdpfxoq H D S Rj Akieh - Roller diameter 90 mm - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm Nedpodx R Tfsfx Akielh - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Year of construction: 2009, operating hours: 3,093 h, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, overall weight: 8,900 kg, total width: 3,400 mm, total height: 3,160 mm, product length (max.): 5,800 mm, spindle speed (max.): 1,600 rpm, table load: 2,500 kg, number of axes: 5, This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 – 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details. • Table size: 1000 x 1120 mm • B axis (table rotation): 360° • Feed rate (X/Y/Z): 4000 mm/min • Spindle diameter: 90 mm • W axis travel: 710 mm • Control cabinet dimensions (L x W x H): 2.0 x 0.75 x 2.0 m • Temperature range: 15–40 °C • Electrical: 3-phase/50 Hz; 380 V rated voltage; 24 V control voltage • Connected load: 40 kW • Fuse rated current: 100 A • Typical power consumption: approx. 7.5 kW • Spindle running time: 3069 h • Power-on hours: 10402 h • General overhaul: 2009 General Information Retrofit Retrofit includes: • Control system: TNC 320 • New drives in all axes Nedpfx Akoy Hvgteijlh • New table • New clamping system • New media units • New hand control unit • New coolant system • New hydraulic unit • 30 measuring scales (linear measurement systems) • Control manufacturer: SK 40 • CNC control: TNC 320 • Complete electrical retrofit • New wiring throughout the machine • Integration of CNC system (TNC 320) • New inputs and outputs (I/O) • New sensors and measuring systems • Updated control circuits and safety circuits • Modern CNC control system • Improved accuracy due to new measuring systems • Higher reliability • Better performance due to new drives • Reduced downtime due to new auxiliary units • New electrical documentation • Updated schematics • Includes systems for power supply, control, machine interface, operator panel, and drivesMachine base remains:MSC Chemnitz table boring machineType: BFT 90/5 MSC – 5 axes Technical Specification Taper Size SK 40

Condition: used, spindle diameter 130 mm x-travel 2000 mm y-travel 1600 mm z-travel 1000 mm spindle taper ISO 50 turning speeds 4-1120 U/min Feed 5-2000 mm/min bore spindle stroke 850 mm Nedpfx Asyqr U Tjkiolh main drive motor 45 kW table surface area 1250x1600 mm Control Heidenhain type TNC 426 workpiece weight 12500 kg 720 radial face slide travel 240 mm total power requirement 90 kW weight of the machine ca. 26,3 t dimensions of the machine ca. 6,5x5x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller Nlodpfjwfn E Ejx Akioh - Digital display - Hardened rollers - Conical rolling option - Pivoting top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Nsdpjx Dzvxsfx Akielh Price 7,500.-

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Nlsdpfsyk H Stsx Akijh Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Condition: ready for operation (used), Year of construction: 2013, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,096 mm, number of axes: 6, This 6-axis KUKA KR 90 R3100 extra was manufactured in 2013. It features a load capacity of 90 kg and a range of 3096 mm, making it suitable for various applications. The machine includes a KUKA KRC4 control cabinet and a smartPAD teach pendant for enhanced usability. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 90 R3100 extra robot arm we have for sale. Contact us for further details. - Controller Model: KRC4- Year of Manufacture (Robot): 2013- Year of Manufacture (Controller): 2013- Robot Weight: 1092 kg- Controller Weight: 150 kg- Load Capacity: 90 kg- Range: 3096 mm- Supply Voltage: 3x400V- Frequency: 50/60Hz- Full-Load Current: 20A- Mains Fuse: 25A- Included Accessories / Components:- KUKA KRC4 Control Cabinet- KUKA smartPAD Teach Pendant- Base mounting plate with leveling bolts- Upper arm extension fixture / junction box assembly Nlsdpszty Acofx Akijh

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM Nljdpsmftiwjfx Akieh ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: used, Year of construction: 2022, operating hours: 837 h, JCB 16C-1 mini excavator, model year 2022, with only 837 operating hours! ----* Manufacturer: JCB * Type: 16C-1 * Model Year: 2022 * Operating hours: approx. 837 * Last service at approx. 806 hours / July 28, 2026 * Adjustable undercarriage * Includes 3 buckets * Power: 12.2 kW * Perkins diesel engine * Operating weight: 1,639 kg * More photos and video available upon request (WhatsApp Erik -->) * Price: 12,900 euros, net + 19% VAT. ----For further questions, please call: Nledpfo Ad Trcsx Akijh Erik Kortum: // WhatsApp ?All information without guarantee, errors and prior sale excepted.

Condition: good (used), Bitzer compressor unit Type: HSK 7471-90 (x3) Volume: 250 m3 / h (x3) Nodpjg Rcfvsfx Akiolh Cooling capacity: 435 kW at -10 ° C / 40 ° C, 280 kW at -20 ° C / 40 ° C Refrigerant: R404A Dimensions: 3600 x 1350 x 2600 mm Pieces in stock: 1 Stock number: Z9 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm Nsdpfjyhrnuex Akielh BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. Nlsdpfjvl Eahex Akish • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,871 h, overall weight: 1,092 kg, total height: 2,150 mm, This KUKA KR-90 R3100 was manufactured in 2016. It includes a floor bracket, control, and an ENGEL CC300 control cabinet – easix. With 3871 operational hours, it has been maintained by Engel. Dimensions for the robot are 2100 x 1000 x 2150mm, and the control cabinet measures 800 x 600 x 1300mm. It weighs 1092 Kg and can handle loads up to 90 Kg with a range of 3096 mm. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Range: 3096 mm • With floor bracket Nljdpfx Aex R E Rvekieh • Maintenance was carried out by engel Extra Information Control Unit With control With ENGEL CC300 control cabinet Dimensions Machine Depth 2100 mm

Year of construction: 1996, condition: good (used), functionality: fully functional, GALLUS T 180 SCREEN AND LETTERPRESS LABEL PRINTING MACHINE WITH HOT-FOIL STAMPING, EMBOSSING, AND FLATBED DIE-CUTTING We are pleased to offer the following versatile GALLUS T 180, designed for the production and finishing of high-quality narrow-web labels. The machine combines three screen-printing units with one letterpress printing unit, UV curing, hot-foil stamping, embossing, and flatbed die-cutting. Thanks to the integrated unwinding and rewinding system, finished rolls can be produced directly within the machine in one complete production process. _____ MACHINE DETAILS Manufacturer: Gallus Model: T 180 Year of manufacture: 1996 Web width: 180 mm Printing processes: Screen printing and letterpress printing Printing units: 3 screen-printing units and 1 letterpress unit Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 3 screen-printing units • 1 letterpress printing unit • Suitable for high-opacity inks, solid colors, and detailed print applications • Combination of screen and letterpress printing within one production line Drying System • UV curing system • Immediate curing of inks and varnishes • Suitable for direct inline finishing and further processing Nlsdpfeztqp Tex Akish Varnishing • Varnishing capability within the letterpress printing unit • Suitable for protective and decorative varnish applications • Inline finishing without the need for an additional standalone varnishing machine Decorative Finishing • Hot-foil stamping unit • Embossing capability • Suitable for metallic, decorative, and tactile finishing effects • Particularly attractive for premium and specialty label applications Web Handling • Unwinding unit • Rewinding unit • Controlled material transport throughout the complete production process • Finished rolls can be produced directly in the machine Die-Cutting • Flatbed die-cutting unit • Suitable for precise die-cutting of different label shapes and materials • Inline production from raw material to finished rolls _____

Year of construction: 2008, condition: ready for operation (used), Manufacturer: Wittmann Nsdjyk Uvmepfx Akielh Model: TP-PLUS -2:90