Used Sone External Threading Machine for sale (68,461)

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Ijdozxqbyepfx Afujih Machine weight: Approx. 3,400 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm Iiedpfx Afort Unwjush - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Ijdouz If Nopfx Afujih Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Iiedpfsybbamox Afujh Type: 300 Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring

Condition: good (used), Thread diameter: 22 mm Thread length: 30 mm throat: 300 mm Max. working height: 1100 mm Hole table: 360 x 500 mm Drilling depth max.: approx. 500 mm Iiodpfx Aoi Nnutofueh Distance between drill bits: 130 mm Power requirement: approx. 1.0 kW Nominal current consumption: 6 A Machine weight approx.: 1.4 t Machine dimensions approx.: 1.3 x 0.68 x 2.85 m Control unit: conventional Unique table for double-headed drilling with 4 material clamps. Size: 375x250 mm The lateral movement of the table is 150 mm

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Iijdpfx Asx D Tbmjfush Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Iodpfxow Al U Ej Afueih For more information, please contact us.

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Iedpfx Aopwbvkefueih

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, Iodpfx Aez St Hwsfueih 8 Station ATC, coolant, Low Volt light.

Year of construction: 2011, condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head Iiedpfx Afjwa Uf Usush

Condition: used, Year of construction: 1994, Thread Rolling Machine EWMenn GW63 Flat dies Year: 1994 Diameter range: max 8 mm Shaft length under head: 80 mm Iijdpfx Afsylw E Teuoh Max. thread length: 58 mm

Condition: excellent (used), Year of construction: 2022, Equipped with a leadscrew mechanism and safety device to prevent tool breakage. Program for single or continuous cycles. Electronically controlled motor braking during single cycles. Motor with pole-reversing capability. Doubled return speed. Spindle speeds are continuously adjustable. Oil circulation lubrication. Iedey Sxq Eepfx Afuoih Table adjustment from the front. Thread cutting capacity, M8 to M45 in E335. Threads per hour: 600. Normal drilling capacity: 50 mm. Thread depth: 150 mm. Drilling depth: 200 mm. Overhang: 325 mm, table area: 650 × 500 mm, overall height: 2150 mm. Weight: 680 kg.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm Ijdpfx Aewmnhpofusih - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm Iijdpjy Umd Ejfx Afuoh table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: good (used), functionality: fully functional, 1 x Thread drilling machine WMW GI4/1 Iiodpfx Afezk I Aleush with coolant system The machine can be inspected while it is powered on.

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Iijdpev Tqdbsfx Afujh Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/9094, Offer Number: M14L/9094 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW32 Constr. year: 1973/2000 diameter range: 1,6-4 mm shaft length under head: 50 mm max. thread length: 30 mm output pieces/min: 300-750 Location: In our warehouse Iijdpfx Aezwqh Rsfush

Condition: excellent (used), Year of construction: 1983, TOYOSK 01CC-T 36-spindle Thread cutting machine with fixed spindle and Manufacturer: TOYOSK Iiodpfx Afewh Sh Noueh Type: 01CC-T Year of manufacture: 1983 Number of spindles: 36 Three-speed gearbox: 520rpm, 850rpm, 1330rpm Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm Iijdswub Ekspfx Afueh -Weight: 128 kg

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Iodpszz Rt Usfx Afusih Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: refurbished (used), Currently undergoing rebuilt, it is possible to customize it. Iodpjzcd Hfsfx Afueih Ingramatic RP1 Fixed die length: 85 mm. Moving die length: 95 mm. Die thickness: 25 mm. Die height: 65 mm. Thread diameter: M2 ÷ M6 Shank length: 100 mm. Thread length: 62.5 mm. Speed Range up to: 600 pcs./min.

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. Iisdpexbzgxofx Afujh If interested, we will also be happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Iiodpfjpag R Rex Afush Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm Iisdpfx Ajupbf Dofujh throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Iisdpjz R Rbdofx Afueh Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.