Used Single Grain Saw for sale (14,200)

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm Gedpfxofnvwqe Ai Njiu - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) Gijdsg Ey Rfopfx Ai Nju -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Gsdpoftm Hrjfx Ai Njiu HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Gjdpfjfnvviex Ai Noiu Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) Gsdeg Ey Ufspfx Ai Neiu -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) Gsdpfxsg Ey T Eo Ai Njiu -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) Gisdpfx Aieg Ezaro Nou -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: Giodjg Ewwrspfx Ai Neu -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Gisdpfx Aszab A Eei Nju Two units in stock Warranty: 6 months

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well. Giodpfewf Anhsx Ai Neu

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q -Type: TQD 3110 D Gisdpfx Aoudqbiei Nsu -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available Godpeb A N Alefx Ai Noiu -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V Godpjb A N Akjfx Ai Noiu -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Gijdpfeyrncisx Ai Nju Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW year 2017 price: 4.950 € Godpfsrupr Dex Ai Neiu contact: Mr. Rainer Eckerle

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Gijdpfx Aijx An Eqe Neu

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Gedpfefv Hphsx Ai Njiu Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Giedpfx Asd H Hmhei Nju Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: good (used), Year of construction: 1998, Tempering unit Mrke: Single Type:STW 1-6-25- ZN FY CA 1998 Gsdpfx Aofcy Droi Neiu

Condition: new, functionality: fully functional, empty load weight: 1,640 kg, lifting power: 1,500 kg/m, lifting height: 9,500 mm, Year of construction: 2026, New Mobile Crane SINGLE LIFT CMC 1500 – BRAND NEW Glasslift is an authorized distributor of BG LIFT, UNIC, and SINGLE LIFT mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA Spyder-type aerial platforms. We are also part of the GGR GROUP and have introduced our own line of GLW transport carts. Thanks to our extensive range of equipment, we select machinery tailored to the specific requirements of each job, offering machines that fulfil our clients’ needs. At Glasslift, we not only execute projects but also supply the tools necessary for their efficient implementation. In addition to sales, we also offer short- and long-term rentals of the above-mentioned equipment. Glasslift is a team of professional operators specializing in comprehensive glass installation, steel handling, and manipulation of structural components. Our team of experienced professionals has an excellent understanding of their areas of expertise, is highly qualified, and each of our operators is fully committed to the projects entrusted to them. We possess the required skills, technical know-how, and professional qualifications, so you can trust us with confidence. Our capabilities are backed by positive references, testimonials, and publications about our company, which underline our reliability and professionalism. Cooperate with the best to ensure comprehensive and effective project execution. For sale: BRAND NEW Single Lift Cramic CMC 1500 mini crane with Pick and Carry function. Gsdpfx Aeyhprdji Noiu By purchasing from the exclusive distributor, you are assured of machine quality, spare parts availability, and service support. Basic information: • Jib reach with searcher hook (8.20 m) and with hydraulic jib (9.5 m) • Maximum lifting capacity: 1,500 kg • Own weight: 1,640 kg • The first mini-crane of this size with an articulated jib (JIB) • Transport dimensions: 239.1 cm (length), 167 cm (height), and 85.9 cm (width) • 360-degree boom rotation • Four extendable (vertical) outriggers for stabilization on difficult terrain • Possibility to mount a suction beam with a 600 kg, 800 kg, or 1,200 kg lifting capacity, or for bent glass up to 800 kg • Extendable tracks allowing safe operation on the most challenging terrain - passage width: 84.9 cm, maximum width with extended tracks: 152.5 cm • Option to mount a personnel basket with a 300 kg load capacity • Battery power for outdoor operation, as well as both battery and 220V mains power for indoor use • Manipulator options: manual slew and tilt, automatic slew with manual tilt, or fully automatic slew and tilt Machine import included in the price. Please contact us by phone for an individual price quotation for any configuration. Availability of genuine spare parts directly from the manufacturer. Service centre located in the heart of Poland at the A1 and A2 motorway junction near Łódź, at the GLASSLIFT SP. Z O.O. equipment base. VAT invoice available.

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Godpfx Aietqt T Io Neiu - electrical cabinet.

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: Gisdpfx Asq Nd Rboi Neu - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Gsdpfozapxzox Ai Noiu Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 320 mm, saw band length: 3,150 mm, saw band speed: 667 mm/s, saw band width: 25 mm, TECHNICAL DETAILS Saw band dimensions: 3,150 x 25.4 x 0.9 mm Speed 1: 20 m/min Speed 2: 40 m/min Cutting capacity at 90° (round): 260 mm Cutting capacity at 90° (square): 250 mm Cutting capacity at 90° (flat): 320 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 210 mm Cutting capacity at 45° (flat): 240 x 200 mm Gsdpfxezapv To Ai Njiu Control: NC EQUIPMENT - Saw band storage

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 280 mm, cutting width (max.): 330 mm, saw band length: 3,650 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw blade dimensions: 3,650 x 27 x 0.9 mm Speed: 15/100 m/min Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Gjdszaptropfx Ai Noiu Cutting capacity at 60° flat: 170 x 170 mm MACHINE DETAILS Total power requirement: 2.2 kW Weight: 1,240 kg Vise: 340 mm Dimensions: 2,020 x 2,040 x 1,740 mm EQUIPMENT - Roller conveyor 2,000 mm