Used Sidel, Sarcmi, Arol, Pe, Smi, Khs U. A. Complete Filling Line For Pet - 14.400 Bph At 0,5 L for sale (102,751)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Dksdpfx Aoxw Ux Hedhju Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Dkodpfsth Taajx Adheu Inspection is very welcome.

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Djdpfx Adoxwc E Iehoku

Condition: ready for operation (used), TETRA PAK COMPLETE FILLING LINE, INCLUDES: - TBA/8-1000 SLIM FILLER, VERSION 120, YOM 2009, 27.000 RUNNING HOURS - CAP30 HELICAP23 100V CAP APPLICATOR - TCBP70 WRAP AROUND PACKER, V110 WITH RENOVATED EL. BOX - EASY RIDE ACCUMULATOR Dkodpfxexz Ezto Adhou - CONVEYOURS SYSTEM EXCELLENT CONDITION, STILL RUNNING

Condition: used, Year of construction: 2007, We are offering this used PE-TRA CutMaster band saw, manufactured in 2007, for sale. Manufacturer: PE-TRA Djdpfx Adezyfwloheku Model: CutMaster If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. Dkodpfxjzix Ate Adhou The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Dsdjiw Icbjpfx Adhjku Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: used, Year of construction: 2001, PET filling line from KHS Additional title: with palletising and depalletising Dodpfxovu Tufo Adhjku Performance at 1 liter: 24000 bottles/h Formats: 0,5 L and 1 L bottles Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer

Condition: used, Year of construction: 2011, Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  - Filtration system | GYM Internacional | 8000 | 2011 - Manufacturer: GYM Internacional - Model: 8000 - Year of manufacture: 2011 - Capacity: 8,000 L/h - Power consumption: 4 kW - Dimensions: 2,500 x 1,500 x 100 mm - Weight: 1,110 kg - Bacteriological filtration through housing system - Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 - Bottle formats: 1.5L & 5L PET - Output: - 1,600 bottles/hour (1.5L) - 700 bottles/hour (5L) - Filling heads: 9 - Capping heads: 1 (screw cap) - Bottle diameter: Min. 120 mm, max. 300 mm - Bottle height: 250-400 mm - Direction of rotation: clockwise - Power consumption: 3.5 kW - Dimensions: 4,000 x 3,000 x 3,500 mm - Weight: 2,500 kg Dkjdpsv E Haijfx Adhsu - Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 - Output: 3,000 bottles/hour - Dimensions: 2,750 x 1,700 x 1,780 mm - Weight: 3,500 kg - Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 - Capacity: 35 pallets/hour - Type: Turntable - Control system: PLC - Max. Pallet weight: 2,000 kg - Semi-automatic - Dimensions: 2,439 x 1,500 x 2,580 mm - Weight: 1,200 kg  

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Dodpfx Adorq Eawjheku

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Dkodpsz Eggvjfx Adhju Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: 2023

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Dkjdpfxsywztge Adhou Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L Djdpfjxhf Hisx Adhoku - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Year of construction: 2021, condition: used, Lumacon automatic crate filling line Automatically feeding of 4 crates/ boxes per cycle. Dkedpfev E Irgox Adheu When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling. - Complete with inclined conveyor belts - Buffer belts - Weighing belts - Multiple lines available from stock (Emmeloord) More photos and full specifications: /

Year of construction: 2015, condition: ready for operation (used), Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/formats: 1l VdF/12-case/6-case KuKa, 0.75l VdF/12-case KuKa, 0.2l/30-case KuKa, 1l/12-case carton. Viewing possible by appointment. Dkodpfxsx Aupvo Adhsu

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections Dkjdoz E S Hhspfx Adhou • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph Dodpfx Aewv Trledhsku The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Dksdpfx Ajzaricsdhju Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: used, Year of construction: 2018, Roll production line Fortuna Magnus S6 Profiline Dough divider and rounder Fortuna Magnus S6, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Proofing cabinet with heating and humidifier, year of manufacture: 2012 Operation without proofing cabinet possible Long rolling station Cutting unit Punching unit Seeding station with humidification for one-sided seeding Depositor for baking trays or depositing onto a conveyor belt for further processing More information, pictures and videos will follow... Dkodpfx Adsz A R Acohju

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine Dkjdpfx Adsxhd Apsheu

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Djdpfx Adszd Ukpohjku Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm Dkjdpfx Aey If Aysdhju - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: used, Year of construction: 2002, Overview Dsdpfx Ajwqpgzsdheku This PET bottling line was built between 2002 and 2013 by the German manufacturer Krones and is designed for bottling still and sparkling water in PET bottles with an Alaska neck finish. The line is in production until September 2025 and can be viewed in operation by prior appointment. Technical details - Output: 22.000 bph (the nominal speed at 0.5 is 25.000 bph) - 60 rinsing nozzle - 80 filling valves - 15 capping heads - Product: Water - Container material: PET - Neck format: Alaska - Label type: OPP - Capper brand: Zalkin - Years of manufacture: 2002, 2009, 2013 Scope of delivery  - Compressor: Atlas Copco ZD2300VSD (2009) - Blowing machine: Krones Contiform S14 (2009) - Air conveyor: Eurosistemi (2002) - Filler: Krones Volumetic, Variojet (2002) - Labeler: Krones Contiroll (2013)

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: - Screw-on caps Ø 30–40 mm - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — Dedpfx Adeyighieheku - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min - Conveyor | Breitner | TPE 6032 | 2006 | —

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. Dkjdpfxswkdt Ns Adhsu We also have additional components from the same log infeed available.