Used Schuler Eccentric Press - Single Column for sale (22,883)

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 Fgedpfx Aedzqltoivsh - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm no. of strokes:180 Hub/min table surface area:400 x 340 mm table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm Fsdpecxxygjfx Aivsgh ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,2 x 1,5 x 2,0 m

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm Fgsdpotqm Dmofx Aivoh column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm Fgsdpfot Tqglox Aivjh hole in the table 100 mm ram surface 120 x 100 mm dayligth 250 mm total power requirement 1,1 kW weight of the machine ca. 1150 kg dimensions of the machine ca. 0,96 x 1,34 x 1,88 m

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH Fodpfxefim Ths Aivegh - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW Fgsdpfx Aievfhp Sevjh weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min ram - range of adjustment 70 mm table surface area 740x440 mm Fgsdevfhqpjpfx Aiveh table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t dimensions of the machine ca. BxTxH 1500x2500x2510 mm

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) Fodpfx Aioyatx Eevjgh - Electric stroke counter - Electric preselection counter - Cam switch mechanism The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: used, Year of construction: 1975, pressure 200 t stroke 20 - 200 mm ram adjustment 130 mm daylight (stroke down, ram adjustment above) 380 mm table surface area 1150 x 800 mm no. of strokes 25 - 75 Hub/min Fedpfx Ajyhq Sxsivjgh total power requirement 9,8 kW dimensions of the machine ca. L 1,7 x B 3,0 x H 3,8 m

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t Fsdpfx Asu Nfkljivegh dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min Fjdpjvvx Exofx Aivjgh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm Fgsdpfx Aocp Apysivoh T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter Fgodpfx Aiju Rwa Iovjh - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Fsdpfsk S Htxox Aivsgh Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm Fsdpfsu N A Uusx Aivogh dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control. * Fodpfou Nfkxsx Aivegh

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel Fodpeu N Ddwsfx Aivsgh accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min Fodpfx Ajzrpn Sjivjgh distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm Fsdpfx Aioy I Ddvevogh stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm ram - range of adjustment 85 mm hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm weight of the machine ca. 3,2 t

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm Fgsdpfx Aievfhpxoveh total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm Fsdpfovfhqiex Aivsgh ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm Fgedpfxovfhqve Aivoh table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min Fodpfx Aievfhq Aevogh ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min Fedpfevfhp Esx Aivsgh ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover Fodpfeykb Dqex Aivjgh - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.