Used S&Ü Drum Dryer / Firewood Drying System for sale (97,080)

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. No direct connection to the pre-machines/devices is required. Iisdpfx Aezr I U Djmlof It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. Iisdpeyffqqofx Amlof The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Iodpfx Ajzp E T Sjmlsif Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Year of construction: 2023, condition: like new (used), functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Ijdpfxsr Iig So Amloif Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Iiodpfjw H Aw Ssx Amlef Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, type of input current: three-phase, type of cooling: air, Reliable conveyor dryer built for curing plastisol and water-based inks on screen-printed garments and textiles. The Econored III 30 combines infrared heating elements with a 30-inch belt width, offering efficient, even heat distribution for consistent, professional-quality curing results. Key Features: 30" (76 cm) belt width, suitable for small to mid-volume production runs Infrared heating technology for fast, energy-efficient curing Isdpeztx T Hofx Amljif Adjustable belt speed and temperature controls for precise curing across different ink types and fabrics Digital temperature control panel for accurate, repeatable settings Sturdy frame construction for stable, long-term operation Compact footprint, well suited for shops with limited floor space Reduced energy consumption compared to older conventional dryer models Ideal for: Screen printing shops, apparel decorators, and textile businesses looking for a dependable mid-size tunnel dryer to boost throughput and ensure consistent ink curing. Well-maintained unit, ready for immediate use in production.

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Iodszp E Sbjpfx Amljif Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Isdszpzbfopfx Amleif Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Year of construction: 2018, operating hours: 1,363 h, condition: used, Model TR 5800 – Screening plant with remote control – Operating hours: 1,263 h – Yanmar engine, 4-cylinder – Drum length: 3.55 m – Drum diameter: 1.55 m – = Further information = Fuel type: Diesel Iodpfx Amozt Ecusljif Year of manufacture: July 2018 Model year: 2018 Color: Green Drive: Track Unladen weight: 12,500 kg = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Iedpfx Amezhcrvjlsif Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell Iodpfjzuygqsx Amleif WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air Iiedjzubtlopfx Amlof • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems for sale. The systems are in very good condition and fully functional. Inspection is possible by appointment. Pos 1 System 3R-203 Rotating element WEDM 360° Pos 2 System 3R-201J Adapter WEDM 90° Pos 3 System 3R-201J Adapter WEDM 90° Pos 4 System 3R-201J Adapter WEDM 90° Pos 5 System 3R-202 MiniBlock Pos 6 System 3R-202 MiniBlock Pos 7+8 System 3R-204 Height adjustment adapter WEDM Pos 11 System 3R-602.21 Manual chuck Macro Pos 17 System 3R-200-4J-2 470mm Iiedeyzqmdspfx Amlef System 3R-200-4J-2 470mm Pos 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection are possible!

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Iiedpeya Hvqjfx Amlsf Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Ijdpeu D Arisfx Amlsif Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2023, functionality: fully functional, space requirement height: 4,200 mm, power: 3 kW (4.08 HP), Equipment: documentation/manual, Automatic Rotary Dryer C2M RED – 11 m³ – Year of manufacture: approx. 2022/2023 – Very good condition For sale are three automatic rotary dryers, model C2M RED, each with a volume of 11 m³, including conveyor systems for infeed and discharge as well as a central control system. The units have only been in seasonal use for a few cycles and are in excellent technical and visual condition. Technical data (per dryer): • Drying volume: 11 m³ • Throughput: approx. 11 m³ dried fruit per day • Diameter: 2.30 m • Height: 3.80 m to 4.20 m • Fan output: 2.2 kW • Motor (screw conveyor) + burner: 0.55 kW • Burner output: 40 kW Energy consumption: approx. 20–35 kg gas per m³ dried product Special features: • Fully automatic three-stage drying process (preset, adjustable depending on product) • Automatic shut-off upon reaching target moisture level • Uniform drying thanks to continuous mixing via screw conveyor drive • Prevents moisture pockets or overdrying • Display of drying level, gas consumption, and operating time • Central control unit to operate up to 10 dryers simultaneously Included accessories: • Conveyor belts and elevators for filling and emptying (conveyor belt/unit: €4,000) • Central control system • Support frames, mounting parts • Documentation available Suitable for: Walnuts, hazelnuts, almonds, apricot kernels, chestnuts, and other suitable products for drying. Location: Austria Availability: Immediately Iijdpfsw Hynujx Amlof Price: Drying chamber (of three available): €15,000 each; conveyor belt per unit: €4,000 If you have any questions, require further technical details, or would like to arrange a viewing, please feel free to contact us.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Iijdpfx Amsy Iplfoljf Very little use Ex Pharma Facility

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems for sale. The systems are in very good condition and fully functional. Inspection is possible by appointment. Pos 1 System 3R-203 Rotating element WEDM 360° Pos 2 System 3R-201J Adapter WEDM 90° Pos 3 System 3R-201J Adapter WEDM 90° Pos 4 System 3R-201J Adapter WEDM 90° Pos 5 System 3R-202 MiniBlock Pos 6 System 3R-202 MiniBlock Pos 7+8 System 3R-204 Height adjustment adapter WEDM Pos 11 System 3R-602.21 Manual chuck Macro Pos 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm Pos 18 System 3R-239–545 0006-V01 System 3R-239–495 Iiedjxqn Ubjpfx Amlef Shipping and inspection are possible!

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SYSTEM ATBF170, The burger forming machine (for burger products with a diameter of 38 - 170 mm and a height of 7 - 30 mm) including the UNIVERSAL CONVEYOR BELT UTV-200/1500 was newly purchased in 2021 as a backup for an identical machine already in use. It was only set up and then operated for just one day. Therefore, the machine is practically new and ideally suited for producing patties, oval, round, or square-shaped nuggets. The forming machine is fed by a vacuum filler, which is not included in the price. The machine is currently set to a capacity of 3,000 patties in an 8-hour shift. It can most likely handle even more. - Pneumatic operation - Ejection plate with water spray system - Synchronous control, 24 V connection - Compressed air: 10 m³/h, 6 bar - Portioning output: approx. 100 portions/min. (product-dependent) - Includes 1 base frame - Without forming insert - Without ejector - Ejection: one-way UNIVERSAL CONVEYOR BELT UTV-200/1500: with additional adapter Connection voltage: 1 x 230 V AC Connection power: 0.5 kW Rated connection frequency: 50 Hz Iodpezhnwdjfx Amloif Length: 1500 mm Width: 200 mm

Condition: used, Year of construction: 2017, Country of manufacture - Italy INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED Iijdpjv Nkaujfx Amlof FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469. Iiedpfozvc R Uex Amlsf

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER Iiedpsy Twa Uefx Amlof SPINDLE COOLING UNIT

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Isdpfx Amsv Si Szoljif Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Quality control and testing laboratories Pharmaceutical manufacturing support Iisdpfx Amoznmvrslsf Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,096 mm, total width: 3,730 mm, total height: 173 mm, compressed air connection: 6.9 bar, type of input current: AC, year of last overhaul: 2026, overall weight: 1,656 kg, conveyor belt width: 910 mm, product height (max.): 2,000 mm, FOR SALE – COMPLETE AUTOMATIC M&R SCREEN PRINTING PACKAGE £25,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our complete automatic screen printing production package for sale. This is a fully operational, professionally maintained setup that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2018 Radicure 36/10 Electric Conveyor Dryer • 20ft conveyor length Iiodezb N Rtspfx Amljf • Excellent working condition 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Key Features: • Complete automatic production package • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £25,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This setup is a bargain and a great addition to any new or established business.