Used Refflinghaus Roll Pointing Machine for sale (71,733)

Condition: good (used), number of rollers: 3, roller (top) diameter: 130 mm, sheet thickness (max.): 3 mm, - Capacity: 1550 x 3 mm Dwedpfjz Ayp Iex Aa Isc - Top roll diameter: 130 mm - Roll length: 1550 mm - 380V

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) Dwedpfx Asz N Hxhoa Iec - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dedpfoymlx Dox Aa Ijwc Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Dwjdpfx Aasywl D Ne Ioc Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Recipe management Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Dodpfx Aaoz E Ra Hs Iowc Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Djdoztfxispfx Aa Ijwc weight of the machine ca. 2 t

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Model: VRM-hy 3000×15 Serial number: WO 10842 Dodpfxsx Sqc Ts Aa Iowc Year of manufacture: 1992 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Inspection possible on-site. Price: €35,000,- EXW If you have any questions or comments, please do not hesitate to contact us. Dsdpsw Edmfsfx Aa Iswc Sincerely, Leo Holland

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original Dsdpfx Ajzwuu Uja Iswc

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 × 1.8 mm – Bending capacity 1050 × 1.5 mm – Roll diameter 70 mm – Minimum bending diameter 105 mm – Conical rolling Djdpoyrn Ixofx Aa Ijwc – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts Dwsdpfxoyml Eke Aa Ijc etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Dwedpfx Aoz H N Ifoa Ioc Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Dwjdpfszxt Txex Aa Ioc drive elektronisch zwei angetri

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Dwodpfx Aaezzn A Ts Ioc Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Dodpoz Alf Ujfx Aa Ijwc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: NT2012, ESCOFIER MACHINE, EXCELLENT CONDITION, VERY LITTLE USED. 12-TON MACHINE. POSSIBILITY TO SEE IT OPERATING IN OUR WORKSHOP. Dwedsycq Ebepfx Aa Isc

Condition: used, Year of construction: 2018, Roll production line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Dwjdpfx Aez A Rzrsa Isc Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex Futura, swiveling, up to a maximum of 4,000 pieces/hour Dies for round and square rolls Die size: SKG63 and RK64 Weight range: 40-105 g Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Docking device including one docking tool of your choice, subject to availability Integrated infeed conveyor

Condition: used, Year of construction: 2016, Roll production line, combination type WP Multimatic MUS Selecta Modular V60 Combination Year of manufacture: 2016 Condition: refurbished, immediately ready for use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS, 5-row 3/4/5-row combined roll production line for the production of shaped rolls and long rolls, sliced and unsliced Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6,000 pieces Proofing time: 12 min Dough sheeter for Kaiser rolls, braids, pressed rolls, etc. "Green operation" without proofing cabinet with direct depositing possible (e.g., for Berliner doughnuts) Output in "green operation", theoretically max. 10,000 pieces per hour Adjustable flour spreader Dedpfx Aez A Ryzsa Iowc Exhaust fan for correcting the proofing chamber climate Optional dryer and stiffening fan Programmable depositing

Condition: used, Year of construction: 2019, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of manufacture: 2019 Condition: inspected and cleaned Stainless steel cover Touchscreen control with recipe management Equipped with a guillotine and forming die Cutting station, type: Rumo 7 Includes 3 cutting rollers (for 1-4 row production) Includes 2 stamping dies Dsdpoz A Sidsfx Aa Iewc Further accessories available upon request.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation Dwsdpfx Aaexn Rrqs Ioc - Brake motor - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2018, Roll production line Fortuna Magnus S6 Profiline Dwjdpfez A R Acox Aa Ijc Dough divider and rounder Fortuna Magnus S6, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Proofing cabinet with heating and humidifier, year of manufacture: 2012 Operation without proofing cabinet possible Long rolling station Cutting unit Punching unit Seeding station with humidification for one-sided seeding Depositor for baking trays or depositing onto a conveyor belt for further processing More information, pictures and videos will follow...

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Empty weight: 11.500 kg Price: On request Dsdpozw A Susfx Aa Ijwc - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm Dwsdpfsz A S Srex Aa Iec -Dimensions: 1670/580/H1150 mm -Weight: 156 kg

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Dwsdpjxau D Iefx Aa Isc Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Roundo hydraulic round bending machine, type PS 205 working width 2500 mm bending capacity up to 5 mm digital display for both side rollers Dsdpfx Ajz Ebh Isa Iowc tapered bending attachment hardened rollers incl. top support