Used Ostas 3-Roll Round Bending Machine for sale (104,713)

Condition: new, Rollmak 3-Roll Round Bending Machine SME 140-20/4.5 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2050 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1550 kg Dimensions L-W-H 3150 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Lsdolu Eumspfx Abyjhn Top roller can be swiveled out Conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Lsdpfofv A Etex Abyohn Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: new, sheet width 1000 mm plate thickness 8,0 mm distance between columns 1070 mm diameter of upper rolls 150 mm pre-bending capacity 6,o mm connected load 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling Lhodpsfv H A Hjfx Abyjn - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement Handbetrieben weight of the machine ca. 0,22 t Ledefv A Epepfx Abyshn dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking Lhsdpfxohzq Dbo Abyen

Condition: new, Fastech 3-Roll Round Bending Machine FRS 1550 x 140 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized bottom roll adjustment 2 x digital display Sheet metal width 1550 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness for pre-bending 4.0 mm Roll length 1550 mm Roll diameter 140 mm Smallest bending diameter 210 mm Weight 1420 kg Dimensions L-W-H 2320 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swung out Ljdpfx Abohzq D Aeyshn Conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Fastech 3-Roll Round Bending Machine FRS 2050 x 140 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 2050 mm Roll diameter 140 mm Smallest bending diameter 210 mm Weight 1530 kg Dimensions L-W-H 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: Lsdpfxehzq D Hj Abyjhn Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cord Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Cesurbend 3-Roll Round Bending Machine MRS 1550 x 140 Lhedpshrdmmefx Abyon Technical Specifications: Special equipment included in the price: Motorized lower roll adjustment Hardened rolls Motorized rear roll adjustment Digital display Sheet metal width 1550 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1550 mm Roll diameter 140 mm Weight 1360 kg Dimensions L-W-H 2320 x 850 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rolls electrically driven Top roll can be pivoted outwards Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Cesurbend 3-roll round bending machine MRS 1050 x 110 Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll digital display Sheet metal width 1050 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1050 mm Roll diameter 110 mm Weight 1080 kg Dimensions L-W-H 1820 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll driven electrically Top roll can be pivoted outwards Conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable CE marking Lhjdpohrdiuefx Abyon

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Lhjdjhzq Dqopfx Abyon Sheet metal thickness 3.0 mm max. Sheet metal thickness 2.5 mm for pre-bending Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1950 x 900 x 1130 mm Motor: 1.1 kW Equipment: Top and bottom rollers, electrically driven Top roller can be swung out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Fastech 3-Roll Round Bending Machine FRS 1250 x 140 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment motorized lower roller adjustment 2 x digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roller length 1250 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1365 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Top roller can be pivoted outwards Conical bending device Asymmetrical roller arrangement Lodpfohzq Dxjx Abyjhn Self-braking main motor Separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Isitan Hydraulic 4-Roll Round Bending Machine 4R HMS 2050x200 2 Speeds Top and bottom rolls driven Hydraulic side roll adjustment 3 Digital displays Hydraulic folding bearing Hardened rolls Tapered bending device Separate control panel Useful length: 2050 mm Top roll diameter: 200 mm Lodsh Ar Duepfx Abyshn Side roll diameter: 180 mm Total motor power: 5.5 KW Working speed: 3 m/min. – 6 m/min. Weight: 3750 kg Dimensions (mm): 3850 x 1350 x 1290 (L x W x H) Bending performance data 10 mm at the smallest inner diameter of 1000 mm (5 x top roll) 8 mm at the smallest inner diameter of 300 mm (1.5 x top roll) Edge bending performance data 8 mm at the smallest inner diameter of 1000 mm (5 x top roll) 6 mm at the smallest inner diameter of 300 mm (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 - ST 42 structural steel)

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale. Lhedpfx Aez Ix Ukebyen

Condition: new, 3-Roll Round Bending Machine ORM 2070 x 140 Technical Specifications: Special equipment included in the price: motorized adjustment of the bottom rollers hardened rollers motorized adjustment of the rear rollers digital display Sheet metal width 2070 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2070 mm Roller diameter 140 mm Weight 1730 kg Dimensions L-W-H 3230 x 880 x 1100 mm Motor: 2.2 KW Equipment: Top and bottom rollers, electrically driven Lsdpfsfig Apox Abyjhn Top roller can be swiveled out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable CE marking

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers Lodpfxjxacbus Abyjhn - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm Lhodpfx Ajxaafdebyon plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, sheet width 1070 mm plate thickness 3,0 mm distance between columns 1100 mm Ledpehfhzvsfx Abyohn diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 420 Kg dimensions of the machine ca. 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel 6.0 mm Aluminium Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Featured with: Lhsdpfx Abjz Tdg Doysn - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Bending length: 2,000 mm Lhjdpfx Abozi D Sajysn Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Bottom roller diameter: 280 mm Top roller diameter: 300 mm MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Weight: 14,200 kg

Condition: new, sheet width 2000 mm plate thickness 8 mm pre-bending total power requirement 7,5 kW Lhodsfv H A Rjpfx Abysn weight of the machine ca. 3,6 t dimensions of the machine ca. 3600x1250x1350 m

Condition: used, Year of construction: 2015, Working length: 1270 mm Roller diameter: 120 mm Maximum sheet thickness: 4.5 mm Sheet thickness for bending: 4 mm Electrical connection: 400 V, 2.2 kW Weight: 1250 kg Ledpfoz Erabsx Abyshn Space requirement: 2300 x 800 x 1100 mm with hardened rollers

Condition: new, Cesurbend 3-Roll Round Bending Machine MRS 1250 x 140 Technical Specifications: Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness 5.0 mm for pre-bending Roller length 1250 mm Roller diameter 140 mm Weight 1150 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Top roller can be swung out Taper bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking Lhodpfx Ash Timpebyjn

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Lhodpfx Aswchn Ujbysn Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Lodpfeztfxijx Abyehn weight of the machine ca. 2 t

Condition: new, sheet width 2070 mm plate thickness 10 mm pre-bending 8 mm Lsdpfxovn U H Ao Abyshn total power requirement 7 kW weight of the machine ca. 5 t dimensions of the machine ca. 4050 x 1470 x 1550 mm