Used Miele Laboratory Suction for sale (3,959)

Condition: good (used), SAT heating cabinet, oven, drying cabinet, up to 185 °C Bjdpfx Ajzwddrec Tsll Interior dimensions: depth 1.75 m, width 2.10 m, height 2.28 m.

Condition: used, Return air and exhaust air ducting: The cleaned air is returned to the machine room via galvanized sheet metal ducts. The return air duct is connected to the upper part of the filter unit. A tested fire protection damper K 90 is installed in the area where the duct passes through the workshop wall. Bledpfx Acozu Ah Dj Tsl Technical data: Duct cross-section: 700x700 mm Return air velocity: 7.5 m/s Exhaust air velocity from the workshop:

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Blodpedz Srbsfx Ac Tjl Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, This listing is for Genlab MINIS/30 Laboratory Incubator The unit is in full working condition and ready for immediate use This miniature incubator is a robust system designed to provide accurate and consistent performance for laboratory temperature control applications. Manufactured by Genlab, this reliable unit is an excellent addition to any modern facility looking to expand its capabilities. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Bodpfx Acszqf Hzj Toll Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals Bledpfx Ajyufrgjc Tol The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Condition: excellent (used), Year of construction: 2022, Description *EUROMATE 4300C DUST EXTRACTION UNIT - WELDING/GRINDING FILTRATION - 1.1 kW* *DESCRIPTION* Mobile EUROMATE 4300C dust extraction unit, model 2022. Dutch professional brand specializing in welding fume extraction. Ideal for source capture on MIG/TIG welding stations, grinding, and fine dust. Replaces an extraction arm or complements a workshop. *TECHNICAL SPECIFICATIONS* Feature Detail Brand / Model EUROMATE 4300C Year 2022 Airflow ~1250 m³/h Vacuum ~2000 Pa Power 1.1 kW Power supply 230V Single-phase Filtration Cartridge + metal pre-filter Filter area 20 m² Sound level ~72 dB(A) Dimensions W 700 x D 750 x H 1100 mm approx. Weight ~95 kg *GENERAL CONDITION* Few hours of operation. Main cartridge and pre-filter in place. Wheels and handle: easy handling. *KEY BENEFITS* 1. *230V Single-phase*: Plugs into a standard 16A domestic socket. 3. *Mobile*: Braked wheels, fits through all workshop doors. 4. *EUROMATE*: Professional brand, readily available after-sales service and filters. *INCLUDED* Complete unit with cartridge and pre-filter in place. Without extraction arm, without hose. Standard Ø160 mm outlet. *LOCATION & CONTACT* Available for viewing in the 49 postcode area, 49000. Easy loading by one person: 95 kg on wheels. Bodpfx Aozaivgjc Tell

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate Bjdpfxju U Afus Ac Tsll - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Bodpozxr R Aefx Ac Toll

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. Bljdpfxozxdgij Ac Tol CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: new, Year of construction: 2024, functionality: fully functional, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably via email. This will allow us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Bjdpeuzf Ihsfx Ac Tjll Extraction table without back wall/side walls Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including power strip) Power strip with tool storage: 2x 230 V socket with flip-open cover, 2x compressed air couplings, power cable and main switch Extraction nozzle Ø 160 mm, with flange

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) Bljdecw Ipajpfx Ac Tsl - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Condition: new, Year of construction: 2021, Dear customers, Bodpfx Ajfn Ndgec Toll To ensure a fast and reliable response to your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Riedex DM-350RV/P Dust Collector Technical data DM-350/P Motor power: 11.0 kW Nominal air flow at 20 m/s: 6927 m³/h Max. air flow: 8000 m³/h Filter cleaning: JET cleaning Residual dust content:

Condition: used, functionality: fully functional, mileage: 165,000 km, power: 536.91 kW (729.99 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 34,740 kg, overall weight: 40,000 kg, axle configuration: 10x4, color: red, driver cabin: sleeper cab, gearing type: automatic, number of seats: 2, total width: 2,500 mm, total height: 4,000 mm, loading space volume: 12 m³, Year of construction: 2015, Attention: For export only! Suction dredger Cappellotto with high-lift discharge system 2 pumps, each with a capacity of 9,000 m³/h Pump operating hours 1 & 2: 3,500 hours Blsdpfezxbrcjx Ac Tel Auxiliary drive operating hours: 14,138 hours

Condition: used, Year of construction: 2001, Technical details: volume flow ventilator - shred: 600-720 m³/h Blodpfx Acoy Elyae Tol electrics - voltage/frequency: 400/50 V/Hz weight of the machine approx.: 107 kg

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ Bsdpfx Acjyt I Axj Tell total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: excellent (used), mileage: 186,000 km, power: 300 kW (407.89 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: air, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, navigation system, power mirror, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Low noise - Air suspension - Radio/CD player - Reversing camera - Sun visor - Central lubrication = Further information = Bledpfxeutax Do Ac Tel Front axle 1: Steerable Front axle 2: Steerable Rear axle 1: Suspension: air suspension Rear axle 2: Steerable; Suspension: air suspension Technical condition: very good Visual condition: very good

Condition: excellent (used), Suction & Filtration Trolley Manufacturer: Anton Metzger Model: MKR 400 S Capacity: 400 liters Technical data, see photo Documentation available Length: 2650 mm Width: 800 mm Bjdpfx Acew Avzps Tsll Height: 1440 mm Weight: 610 kg

Condition: good (used), mileage: 352,000 km, power: 194 kW (263.77 HP), first registration: 07/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: orange, suspension: steel, total length: 7,100 mm, total width: 2,500 mm, total height: 3,350 mm, loading space volume: 8 m³, Year of construction: 1998, Equipment: differential lock, power assisted steering, = Additional options and accessories = - Leaf spring suspension - Differential lock - Air horn - Sun visor - Power take-off (PTO) - Central lubrication system = Further information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle: Dual tires; Differential lock; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30%; Reduction gear: External planetary axles Bsdpfx Acoztdm Es Toll Number of cylinders: 6 GVWR: 18,000 kg Technical condition: good Optical condition: good

Condition: good (used), Various suction manifolds, suction distributors Bsdpfx Acjtp Hpbe Tell Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller."

Condition: excellent (used), mileage: 14,400 km, first registration: 06/2004, color: yellow, loading space volume: 14 m³, Year of construction: 2004, Bekker Lagram RVS (Onox 1.44) 14400 liters possible whit chassis and cilinder Bljdpfjwwtk Dsx Ac Tol = More information = Technical condition: very good Visual condition: very good Contact Gerrit Haverhoek or Piet Haverhoek for more information.

Condition: new, functionality: fully functional, mileage: 100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: diesel, color: white, first registration: 03/2026, Year of construction: 2026, operating hours: 10 h, Equipment: air conditioning, parking heater, New vehicle SB 1940 Standard body DINO Vario 12m³ Volvo FH500 8x4-4 NLA MTS suction excavator DINO Vario 12m³ Standard equipment: MTS suction body MTS double fan (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5m³/min, 8 bar POWERARM articulated arm with 7m suction hose 3 stabilization supports PLC control with remote diagnostics Radio remote control Set of demolition and air release tools Documentation and training TÜV inspection Optional extras: Container with stainless steel lining MEGAARM articulated arm Rotary suction pipe system IKE/PERFOR Suction & drive & steer HYDROSTAT Full cladding DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full cladding DESIGN Electric steering Storage box made of stainless steel (max. 1,200mm wide) Bsdpfx Acjzvxfno Tjll Step ladder with 3 steps under the hose rack Step ladder with 3 steps (on both sides of the machine housing) Industrial equipment: Stepless speed control for special models HBC radio remote control with display (2x radio with cable function) Accessories - lighting: Lighting package I: 3 LED lights on the vehicle frame Lighting package II: 2 LED lights on the center joint of the articulated arm Lighting package III: LED light strips in the tool box Lighting package V: LED lights next to the articulated arm shaft Lighting package VIII: Light bar on the cover (rear) New vehicle Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, first registration: 07/2024, emission class: euro6, Year of construction: 2024, Equipment: air conditioning, parking heater, Vacuum Superstructure: Tested quality directly from the manufacturer 6-month warranty 1 year / 500 operating hours maintenance-free Operating hours of the fan: 652 hours Operating hours of the compressor: 670 hours Standard equipment: MTS vacuum superstructure MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5 m³/min, 8 bar POWERARM with 7m suction hose 3 stabilizing supports PLC control with optional remote diagnostics Wireless remote control (brand: Gross Funk) Storage space Module options: Container & lid with stainless steel lining Stainless steel toolboxes EVO-POWER ARM Rotary suction pipe system IKE/PERFOR Suction & drive & steering HYDROSTAT Electric steering Volvo Full cladding DESIGN High-tipping system HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment: Industrial Package II: Gas sensor Infinitely variable speed control for the fan Filtration unit for the oil circuit Environmental equipment: Hydraulic oil biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder for the machine housing (2x) Ladder under the hose rack Accessories - Lighting Lighting Package II: 2 LED lights on the center joint of the POWERARM Lighting Package III: LED light strips in the toolbox Lighting Package V: LED lights next to the POWERARM shaft Bljdpfjzvw U Ujx Ac Tsl Lighting Package VII: Fire brigade lighting 2x Lighting Package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance Subject to errors and prior sale. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, functionality: fully functional, mileage: 112,000 km, power: 375 kW (509.86 HP), gearing type: automatic, fuel type: diesel, color: yellow, first registration: 09/2019, Year of construction: 2019, Tested quality, directly from the manufacturer 6-month warranty 1 year / 500 operating hours maintenance-free Operating hours, fan: 2175 hours Operating hours, compressor: 1913 hours Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5 m³/min, 8 bar 3 stabilizing supports PLC control with optional remote diagnostics Module options Bsdpfezvwf Hjx Ac Tell MEGA ARM articulated arm DESIGN full enclosure Water slide, container at the top Aluminum fenders Industrial equipment ABITRON instead of GROSS FUNK Accessories - Module Step ladder, machine house (2x) Accessories - Safety Protective railing around the container lid Errors and prior sale excepted. The vehicle description is provided for preliminary information only. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Bsdov S Synjpfx Ac Toll Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox Bjdpfx Aezr Ht Eec Toll - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...