Used Mg Section Bending Roll Shafts 360 Mm for sale (77,631)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Isdpfxowk Rlxe An Uoar max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: Iodpomqldksfx An Uear 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Year of construction: 2006, condition: excellent (used), Face plate diameter 360 mmInside diameter 115 mmAge estimated Iedpfxefat Uxo An Uoar

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 3ROLL3000X50MM, roller (bottom) diameter: 460 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, roller length: 3,100 mm, working width: 3,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 26,000 kg, type of input current: three-phase, working length: 3,000 mm, Equipment: documentation/manual, emergency stop, model 3 roll planetary with pre-pinch 3000x50 mm upper roll size 500 mm CAPACITY plate width 3000 mm plate thickness 50 mm Iedpfx Ansvr S S Re Uoar prebending 36 mm diameter rolling 2200 mm performance on plate quality 355 MPa ---- reducing plate width 2000 mm capacity thickness 55 mm --- minimum diameter of rolling 600 mm all the accessories installed hardened rolls conical attachment digital position readout power installed 50 Hp weight of the machine 26Ton

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Iajdey Aubuepfx An Usr Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: used, mileage: 5,000 km, power: 82 kW (111.49 HP), color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, seat heater, = Additional Options and Equipment = - Passenger airbag - Power window controls – left - Power window controls – right - Driver airbag = Notes = - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. D. Neidhart and J. Ebert will be happy to assist you. Current mileage: 5,785 km Additional features: 6 speakers, deactivatable passenger airbag, driver/passenger airbags, traction control (ASR), audio navigation system, electrically folding exterior mirrors, electrically adjustable exterior mirrors, heated exterior mirrors, exterior mirrors in vehicle color, Bluetooth interface, brake assist (EBA), "coming home" light function, roof rails, rear parking sensors, driver assistance system: roll-over protection system, rear power windows, Bluetooth hands-free system, rear window wiper, infotainment system (10.1-inch touchscreen), Isofix child seat attachment points on rear seats (including i-Size child seats), 360° camera system, 5-door body, front head airbag system, front head-shoulder airbag, 3 manually adjustable rear headrests, alloy wheels, rear center armrest, engine 1.0 L 82 kW T-GDI CAT, emergency call system (eCall), panoramic sunroof, electronic parking brake (EPB), digital radio reception (DAB), wheelbase 2580 mm, tire repair kit, split-folding rear seat backrest (60:40), low emissions according to Euro 6d emission standard, front side airbags, electrically adjustable driver’s seat, height-adjustable driver’s seat, height-adjustable passenger seat, 4-way adjustable passenger seat, upholstery: synthetic leather, heated front seats, smartphone interface (Apple CarPlay & Android Auto), start-stop button, 12V power socket, solid paint Dover White Rain sensor, heated front seats 2nd owner (German vehicle), we are happy to provide you with an offer for trading in your used vehicle. Should you wish to lease or finance your vehicle, we can also provide you with a tailored offer. Subject to errors and prior sale. - Alloy wheels, electronic immobilizer, ESP, navigation system, service history, warranty, rain sensor, panoramic roof, electric side mirrors, Bluetooth, onboard computer, electrically adjustable seats, hands-free system, multifunction steering wheel, Isofix, light sensor, fog lights, non-smoker vehicle, start/stop system, roof rails, emergency brake assist, keyless central locking (keyless), blind spot monitor, alarm system, armrest, hill start assist, leather steering wheel, tire pressure monitoring, paddle shifters, sound system, touchscreen, USB, all-weather tires, winter package, Apple CarPlay, Android Auto, fully digital instrument cluster, electrically folding side mirrors = Additional Information = Ijdpfx Anoyy H R Ne Usar Engine displacement: 999 cc Number of owners: 2 Please contact Tobias Ebert for further information.

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Iodsyttwbjpfx An Uoar

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 6,090,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe Iedpfjyik Hcsx An Ujar -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Iajdpsxyvx Tjfx An Usr Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Iasdpfx Anjh U Rzgj Uor SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing Iaodjxaawgepfx An Ujr - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible Iaedpfxsxacdve An Uer - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Iajdpfey Azgwjx An Ujr Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 Isdpfxohpchyj An Usar IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Ijdpfx Answw I Tme Ujar

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm Iasdsh Timpspfx An Uer motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: good (used), Year of construction: 2009, machine/vehicle number: 673309012, Offer 26121 Technical Specifications - 2 driven rolls, each roll hydraulically adjustable - For pre-bending and conical bending, side supports swiveling - Operation via separate control panel with digital position displays - Max. working width: 2520 mm - Max. sheet thickness at 400 N/mm² (without pre-bending): 20 mm Iasdpoy A I Syjfx An Ujr - Top roll diameter: 325 mm - Side roll diameter: 275 mm - Bottom roll diameter: 325 mm - Adjustable working speed - Drive: 400 V / 22 kW - Space requirement approx.: W 4900 x H 1700 x D 1900 mm - Machine weight approx.: 12,000 kg - Includes: - Conical bending device - lateral support arms, hydraulically adjustable

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm Isdsywzlpepfx An Usar -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: used, Year of construction: 1970, Press brake, bending machine, swing bending machine, die bending machine Iaodpfx Anjywzhqo Uor -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 25,000 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine Arkus12 For sale is a profile bending machine, model Arkus12, manufactured in 1997. The machine is equipped with the reliable PC100 control system (DOS) and has recently undergone a complete overhaul, including full servicing. With approximately 25,000 operating hours, the machine is in good technical condition and available for immediate use. It is ideal for precise and dependable profile bending tasks in industrial applications. Technical data: Machine type: Profile bending machine Iaedjyzik Ujpfx An Uor Model: Arkus12 Control system: PC100 (DOS) Year of manufacture: 1997 Operating hours: approx. 25,000 hrs Condition: Completely overhauled including service Availability: Immediate Note: The sale is made without any warranty.

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Iasdpoyzc Iaefx An Usr Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), working width: 1040 mm metal sheet thickness: 1,25 mm Isdpfx Asdt Dqwon Uoar upper roller-Ø: 56 mm below roller-Ø: 56 mm weight: 190 kg space needed: 1450 x 460 x 1030 mm

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm Iodpfx Anebpytpo Usar metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg space needed: 560 x 1570 x 1080 mm

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm Iedpfxeda I Its An Ujar space needed: 1370 x 570 x 1100 mm

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm Iedpfsb N Eu Iex An Uoar upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg space needed: 560 x 1570 x 1080 mm