Used Müller Cd 100 for sale (27,639)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine sanding machine, Kundig Brilliant wide belt sander with electronic segmented pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be sent on request. Ideal sanding machine for interior fitting companies, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam. Edge segments can be switched on or off. Pressure beam segment width 22mm (ideal for lacquer sanding between coats). Pneumatically adjustable calibration roller, grooved rubber-coated roller with grain compensation. Drive motor 11kW. Continuously variable cutting speed 3 – 15 m/s via frequency inverter. Conveyor feed speed steplessly adjustable from approx. 3 to 15 m/min. Workpiece-actuated belt cleaning air blast device. Constant table height approx. 950mm, achieved by adjusting the machine top section. This allows for integration into sanding lines. Feed belt still very grippy and in excellent condition. Conveyor carpet with adjustable vacuum blower, making it possible to securely hold even small parts. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Abrasive belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking system. Extraction ports: 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt cleaning air nozzle, vacuum blower, calibration roller settings, and segmented pad parameters. Thickness measurement system with adjustable material removal, and Enormatic with automatic thickness adjustment triggered by the feed, eliminating the need for constant caliper measurements. Programs for a variety of sanding tasks can be saved and selected via smartselect. CE mark. Operating manual included. 2 sanding inserts included. The four bellows have been replaced. Without the connection cable shown in the pictures. Original paintwork, only minor touch-ups in some areas. Very good condition, from a small workshop. The machine has approximately 1,395 operating hours (about 2 hours per week). Gjdpfxsyxg N No Amuoit Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2,300kg. Includes large mobile storage table at belt height for sanding belt storage. Table size approx. 1520 x 1360 x 950mm. Various sanding belts from K80 to K400 included. The machine can be inspected and demonstrated at our premises by prior arrangement. We only offer machines that are ready for demonstration in our warehouse – see "other listings from this seller."

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 Gsdpfsr D Nmyjx Amueit - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 4,100 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, +++ Buy +++ Lease +++ Rent +++ Mercedes Benz Sprinter 417 CDI downgraded to 3.5t with Rockstroh Drain Jet 100-1 High-Pressure Jetting Installation €1,707.09 per month plus VAT, 60 months term, 40,000 km per year, business customers only Internal Number: #560 Rockstroh Drain Jet 100-1 * Power take-off from Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000-liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass system * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with slip-resistant surface * Basic set of cleaning nozzles Special equipment: Second battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, single-pole battery disconnect switch, driver assistance system: traffic sign recognition, chassis: stabilization level III, electric parking brake, all-weather floor mats, vehicle without lashing eyes, PTO gearbox lock, front cup holders, A-pillar grab handles, additional main key, rear doors (opening angle 270 degrees), flip-top storage compartment, terminal strip for electric connections (under driver seat), comfort lighting in passenger/cargo area, dashboard loading package (additional USB ports and 12V socket), cable duct at rear portal, cable duct at side wall, navigation system for MBUX multimedia system, PTO 2B with intermediate shaft, programmable special module, crossmember for trailer hitch, crossmember with integrated step, driver’s cab seats: comfort passenger seat, driver's seat comfort, fuel sender for auxiliary heater, cutoff relay with additional battery, reinforced front axle, pre-installation for transmission oil cooling, permissible gross weight 3.88t, soft-close aid for sliding door right Gijdjy Ac Ipepfx Amujt Additional equipment: Third brake light, storage compartment above windshield, storage below passenger dashboard, adaptive brake light, passenger airbag, driver airbag, acoustic package, hill start assist, trailer hitch: electrics for trailer socket, electrically folding mirrors, electrically adjustable and heated mirrors (both sides), mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio), roof light in cargo area with door contact, automatic headlights, entry handle on rear right C-pillar, entry handle for sliding door at partition, assistance systems: turn-off assist, active brake assist, active lane keeping assist, start information assist, Attention Assist (drowsiness detection), Intelligent Speed Assist, breakdown management, crosswind assist, digital tachograph, 250 A alternator, speed limiter 90 km/h, body: standard panel van, instrument cluster with color display, LTE communication module for digital services, fuel tank: main tank 93 liters, full partition wall, multifunction steering wheel, truck registration, ...

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,460 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #559 Mercedes Benz Sprinter 417 CDI downgraded to 3.5t with Rockstroh Drain Jet 100-1 High-Pressure Flushing Unit Installation: * Rockstroh Drain Jet 100-1 * Power take-off from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/min at 210 bar (38KW) * Pressure control and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Low water protection system * Electric filling system and overflow protection * Electronic speed control * Bypass system * Remote radio control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lamps * Various storage options * Waterproof plastic floor coating with non-slip surface Special equipment: Second battery (auxiliary battery) in cabin, 3-button remote for central locking, acoustic package, 13-pin trailer socket, DAB tuner (digital radio reception), entry grab handle on right rear pillar, Chassis: Stability Level II, electric parking brake, all-weather floor mats, vehicle without lashing eyes, 250 A alternator, transmission lock for power take-off, front cup holder, rear door (opens to 270 degrees), terminal strip for electrical connections (under driver’s seat box), instrument cluster with color display, cable duct at rear portal, cable duct on side wall, side marker lights, multimedia system MBUX (10.25” touchscreen with navigation), Power take-off 2 B with intermediate shaft, configurable special module, crossmember with integrated step, reversing camera, wipers with rain sensor, fuel sensor for auxiliary heating, isolation relay for additional battery, fleece battery 92 Ah, reinforced front axle, pre-installation for transmission oil cooling, closing aid sliding door right Other features: Third brake light, overhead storage above windscreen, under-dashboard storage on passenger side, adaptive brake light, driver’s airbag, traction control (ASR), washer fluid level display, electrically adjustable and heated wing mirrors, outside temperature display, automatic light activation, entry grab handle for sliding door at partition, electronic brake-force distribution (EBV), Assistance systems: Active Brake Assist, Crosswind Assist, Lane Keeping Assist, digital tachograph, 90 km/h speed limiter, body type: van, Keyless Start, child lock, communications module (LTE) for digital services, fuel tank: main tank 71 liters, continuous cargo partition, steering wheel (mechanically adjustable), headlamp leveling, Mercedes-Benz emergency call system, engine 2.0 L - 125 kW CDI CAT, wheelbase 3,665 mm, low-emission according to Euro 6d-TEMP, right side sliding door to load/passenger area, SCR system (AdBlue technology), seatbelt system with warning (passenger side), seatbelt system with warning (driver side), seat upholstery: fabric, driver’s cab seats: adjustable passenger seat, driver’s cab seats: adjustable driver’s seat, engine start/stop system, maintenance interval display (Assyst), heat insulating glass (windscreen with top filter strip), For further details and/or pictures, please contact us directly. A large selection of other vehicles for BUYING or RENTING can be found at: Gijdjyxvaqopfx Amuot

Condition: new, overall weight: 1,150 kg, total height: 1,320 mm, total width: 850 mm, total length: 1,940 mm, Distance between centers 1000 mm Max. swing over bed 410 mm Max. swing over carriage 255 mm Max. swing in gap 580 mm spindle bore 52 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 -550 1/min Spindle speed 2: 550 - 3000 1/min Travel cross slide 225 mm Travel top slide 100 mm Giodoydcvnepfx Amujt If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, mileage: 316,423 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2010, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, + RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #543 Mercedes Benz Sprinter 516 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Unit Installation: Rockstroh Drain Jet 100-2 * PTO from Sprinter * Pratissoli KF3 high-pressure pump * Pressure control automatic * Pressure control and safety valve * 1st hydraulic HP hose reel for approx. 120m DN13 * 2nd hydraulic HP hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000-litre water tank * Bypass control * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED rotating beacons * Various storage options * Vice * Wooden floor with coating, side panels clad in aluminium chequer plate Gsdpfexc S Atox Amujit Special equipment: 13-pin trailer socket, 100 Ah battery, additional (reinforced) battery, digital tachograph, 180 A alternator, transmission lock for PTO, rear door (opening angle 270 degrees), PTO 2B with output shaft, parameterisable special module, radio pre-installation, spare wheel with road tyres, spare wheel holder under rear frame including jack, cab seats: comfort suspension seat, driver side, reinforced rear stabiliser, reinforced front stabiliser, sender for auxiliary heating, separation relay for additional battery, preparation for additional heat exchanger, provision for transmission oil cooling, booster heater Additional features: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated indicator, brake assist, braking system with ABS+ASR, roof lining in cab, lockable glove compartment, body/superstructure: standard high roof panel van, child safety lock, fuel tank: main tank 75 Ltrs., continuous bulkhead, load securing/lashing points, headlamp range adjustment, engine 2.1 l - 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, low emissions according to Euro 5 emissions standard, sliding right-side cargo/passenger door, seat cover/upholstery: Lima fabric, cab seats: adjustable passenger seat, Assyst maintenance interval display, heat-insulating glazing, permissible GVW 5.00 t, twin tyres on 2nd/rear axle For further detailed information and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any warranty.

Condition: good (used), flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: KEB, flat gear motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 -Speed: 50 rpm -Engine: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm Gjdpst Hy Thefx Amueit -Protection class: IP56 -Dimensions: 445/230/H360 mm -Weight: 60 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD250B40/28-100 -Stroke: 100 mm -Piston rod: Ø 28 mm / M16 x 1.5 -Hole: Ø 25 mm -Number: 2x cylinders available Gedpfx Ajunn I Nsmuoit -Price: per piece -Dimensions: Ø 88 x 400 mm -Weight: 5.9 kg/pc.

Condition: ready for operation (used), CRE Rösler Electronic CDFM150BX08 monitor A01-10169 SN: 1000951 / 100-245V AC / 40W, used, in good condition, 100% fully functional, delivery as shown in photos. Gedpfx Aox Eq Enjmusit

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights Gjdpjxc Syrofx Amuoit * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: ready for operation (used), Baumüller BUS6-E-AM-0028-AA10-0000 built-in control device, used, normal signs of use, 100% functional Godpfx Amei D T H Uoueit

Condition: ready for operation (used), Weidmüller ICD06 control panel with 3.5" floppy disk drive, used, good condition, 100% functional Gsdsxaig Dopfx Amuoit

Condition: excellent (used), Year of construction: 2005, Ref: 11098 . 2005 Muller Martini ‘Corona CC-12’ EVA / PUR High Speed Perfect Binder. Excellent condition! Only 36,800 hours worked! Comprising: 36 x 3695/24” top loading feeders with sequential stop/start + handfeed station ‘ASAC’ copy control system with 3714 downstream shut-off element Jogging unit 3643 and Spiral Raceway element 3641 M.M. automatic motorised make-ready with “Commander” Control System. Giodpfx Amey Ib S Rjuot Programmable with data retrieval, menu-guided set-up and on-the-run adjustment Book transfer section with 25 kW drive motor M.M. ‘Corona CC12-23’ with 22 x 23” Combi-clamps Spine preparation units with cutting/milling/sanding/brushing Interchangeable spine gluing units, comprising; ICS30 EVA hot-melt side glue pre-melt tank 30 ltr. ICS80 EVA hot-melt spine glue pre-melt tank 80 ltr. PUR pre-melt unit PUR spine glue unit EVA hot-melt spine glue unit EVA hot-melt side glue unit Stream cover feeder with nipping Lay-down delivery unit to: Flat conveyor system (details on request) to: NO TRIMMER (trimmer can be found and added) Specification: 3695/24" Gatherer - sig. sizes, Max: 500 x 320 mm Min: 140 x 100 mm CC12/24” Binder book sizes, Max: 510 x 305 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 80 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 12,000 cycles/hr.

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 - 1991 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 Gedpfx Ajy R Ty Eomujit - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Transport system

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: Gijdpfx Asyid Nwomuot - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2016, condition: used, Sewing machine Müller Martini Ventura MC Year: 2016 Description: - Commander with touchscreen - Automatic setting - ASIR Automatic Signature Image Recognition: ASIR 3 - 4 + 4 opening possibilities - Book block separator Giedpfx Asyzzwajmust - Book stacker - Venturi Air Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Gedpfoxt Hn Sex Amujit Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: new, Müller co-ax 5-PCS-2 15 NC valve with external drive 24V DC ,unused, 100% functional, scope of delivery according to photos Gisdpfxji Eb Tds Amujt

Condition: ready for operation (used), Siemens 1HU3076-0AC01 – Z Motor, serial number: ECD82150601001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gijdoy Npt Eopfx Amujt

Condition: new, müller co-ax 5-PCS-2 10 NC valve with external actuator 24V DC ,unused, 100% functional, scope of delivery according to photos Gisdpsi Eb Tasfx Amuet

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Giedpfxovuuh Tj Amuot Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m Gjdpfx Aovuuhgomuoit year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: ready for operation (used), Otto Müller SR 30 High-speed radial drill Drill spindle holder (Morse): 40 mm Longitudinal displacement drill head (X-axis): 750 mm Arm travel height (Y-axis): 450 mm Spindle diameter: 70 mm Max drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Gisdpfevilzgex Amust Power supply: 380v Without oil skimmer to the left of the machine in the picture Transport possible at more price. Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 30 Fast Radial Drill Drill spindle mount (morse): 40mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 450mm Spindle diameter: 70mm Max drilling depth: 150mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer on the left of the machine in the photo Transport possible at an additional cost. Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 30 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 40mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 U/min Abmessungen: 175x120x235cm (LxWxH) Power supply: 380 V Ohne Ölskimmer links neben der Maschine im foto Transport gegen Aufpreis möglich. Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: ready for operation (used), Otto Müller SR 23 Fast Radial drill press Drill spindle adaption (morse): 30 mm Longitudinal displacement drill head (X-axis): 750 mm Arm stroke (Y-axis): 350 mm Spindle diameter: 55 mm Max drilling depth: 125 mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new controls, ready to put to work. Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 23 Fast Radial Drill Drill spindle mount (morse): 30mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 350mm Spindle diameter: 55mm Max drilling depth: 125mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new control, ready to put to work. Transport possible at an additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 23 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 30mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 350 mm Spindle diameter: 55 mm Gijdpfx Amevilzmjuot Maximum drilling depth: 125 mm Speed: 2400 U/min Abmessungen: 175x130x215cm (LxWxH) Power supply: 380 V Völlig neue Steuerung, sofort einsatzbereit. Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Gisdpsvuucqofx Amuet Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading