Used Large Diameter Bearing Ø1398 Mm for sale (77,306)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Iasdemhhyajpfx An Uor - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing Iedpfoh Ek Daox An Uoar - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Iodpfx Aemhh Ansn Usar Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments Iajdpfxsmhhf So An Usr - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard Iedpfemhhl Hex An Uoar

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Iedpfxomidyfe An Uear Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iedpomkixwjfx An Ujar The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Ijdpomhh Dtefx An Ujar Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, For sale: high-quality compensation (flexible) hose by BOA, made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN65 Length: 2000 mm Operating pressure: PN16 Connections: flanged Material: stainless steel (INOX) Iodpoyzi Hvofx An Usar Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Application: industrial installations water, gas, and steam systems compensation for vibrations and thermal expansion protection of pumps, valves, and pipelines 📦 Condition: New – old stock (NOS) Possible minor traces of storage (visible in the photos). Unused and in full working condition. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction vibration and noise reduction 📸 Included: Exactly what is shown in the photos.

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: Isdpeyzixlefx An Uoar New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. Iasdpfx Aeyzirxen Uor This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Design: End beam Bracket: 4 HK (hooks) Clear width: 1,350 mm 02x Locking pins, used Finish: Fully galvanized For securing the cross beams To prevent unintentional lifting Note: Ijdpfoymlt Isx An Ujar Suitable for accommodating horizontal braces. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transportation or shipping of the item is subject to additional costs, which can be requested from us separately depending on the place of delivery and/or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 1007 daffodil yellow Box profile: 80 x 50 mm Beam type: AUF'B'H0488 Connector: 4-hook (claw) Clear width: 1,350 mm 02x safety pins, used Version: fully galvanized For securing the cross beams To prevent unintentional lifting Note: Suitable for accommodating bracing in a horizontal direction Iodpfeymffqex An Ujar Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipment of this item is subject to additional costs, which can be provided separately depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Racking system manufacturer: Jungheinrich Type: MPB Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 1007 Daffodil Yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Maximum load per pair of beams: 1,600 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional removal Iaedpfxeymdaae An Usr Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should additional transport or shipping be required, this will incur extra costs, which can be provided separately depending on the delivery location and scope. Please contact us for a quote.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Iedpfx Aoyl Tygen Uear Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Beam type: AUF'B'E 0485|15 Connector: 4 HK (hooks) Clear width: 2,700 mm 02x Safety pins, new Design: fully galvanized For securing the crossbeams Protection against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Transportation or shipping of this item is possible at additional cost, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Four-jaw spiral chuck diameter 315 mm chuck height flute 125 mm Iedpelguy Sofx An Uear short taper chuck size 6 taper diameter 106,39 mm pitch circle diameter for stud 133.4 mm 4 stud bolts M 12 Accessories : 1 chuck key 1 set of hard drilling jaws 1 set of turning jaws hard Weight 103 kg Transport dimension : W800 x D.600 x H.550 mm

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Iajdpfx Aow R E Hvjn Uer

Condition: new, Technical data for pallet rack beam: Racking system: Jungheinrich Type: MPB Scope of delivery includes: 01x pallet rack beam, new Material color: RAL 1007 daffodil yellow Box profile: 140 x 50 mm Beam type: AUF'B'E0444 Connector: 4 HK (hooks) Iaedpfx Asyla R Son Uor Clear width: 2,700 mm 02x safety pins, new Design: fully galvanized For securing the longitudinal beams Prevents unintentional lifting out Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Further transport or shipment of this item can be arranged at additional cost, which can be requested from us depending on the place of delivery or scope of delivery.

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation bearing number 28418 Isdjmxi T Aspfx An Ujar

Condition: new, Circular saw blade HSS diameter 225 mm Number of teeth 180 pitch 4 mm width 2 mm Iaedpjmxi T Uefx An Uer Bore 32 mm (28419) unused, from magazine liquidation

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x pallet rack beam, used Material color: similar to red-violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Locking clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams: 3,380 kg, with evenly distributed load. (Observe bay load limits) The beams feature a diagonal brace mounting! On each the left and right side of the beam end a bracket is welded on the locking clip edge! (Depth 90 mm – L: 50x50x5 mm) 02x safety pins, used Design: fully galvanized For securing the cross beams Note: The beams remain fully functional despite the holes! The beams come from an SSI project with heat protection panels that, according to the manufacturer, were bolted on! Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Iedpfx Asykqrdsn Uear General information about the item: This item is only offered for collection. If transport or shipping is desired, this is subject to additional costs. Please inquire separately with us, specifying your delivery location and required quantity.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Isdpfx Ajxmt Eqen Ujar

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift Ijdpfew Rdtujx An Uoar

Condition: used, Technical data for pallet rack beam: Racking system: Jung Heinrich Type: Delta Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Box profile: 130 x 50 mm Connector: 3 hook Clear span: approx. 2,700 mm 02x safety pins, used Version: fully galvanized For securing the longitudinal beams Your contacts at our company: Iasdpfsyiz Duox An Usr Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for pick-up. If transport or shipping of this item is required, additional costs will apply, which can be requested separately depending on the delivery location and scope.

Condition: good (used), Technical data for pallet rack beam: Shelving system: SSI Schäfer Type: PR600 The scope of delivery includes: 01x pallet rack beam, used Material color: grey INP profile: 80 x 42 mm Beam type: TRV1-180-08-I Connector: 4 HK (hooks) Clear span: approx. 1,800 mm Max. load per pair of beams: 2,700 kg with evenly distributed load. 02x safety pins, used Version: fully galvanized Iaodpeyiymnefx An Ujr For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required beyond this, additional costs will apply depending on the delivery location and scope, which can be requested from us separately.