Used Lamina Gluing And Folding Machine for sale (70,711)

Condition: excellent (used), Kuper FWM 630 in excellent condition Rodoy Swpmjpfx Abyou

Condition: new, Year: 2023 • Type: Robotic pick and place cell • Robots: 2 x Stäubli TS2-80 SCARA robots • Robot reach: 800 mm • Robot payload: 8.4 kg each • Guarding: Full enclosed safety cell Redpfx Aoy An Egsbyeu • Controls: Integrated control cabinet with HMI • Teach pendants: 2 fitted • End of arm tooling: Vacuum gripper heads fitted • Conveyor system: Infeed/outfeed conveyors included • Application: High-speed food/product pick and place

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Rodpfx Absx Upgcjysu

Year of construction: 2004, condition: ready for operation (used), Infeed width: 660mm, equipment: pallet feeder PD-66-T, Tremat sheet separation system, six folding plates in the parallel folding section, downstream knife shaft, two folding knives in the cross-fold section, one additional folding plate after the 1st cross fold and pressing station with standing sheet delivery SB-46/MP.D. The system is technically without problems, rollers need to be replaced. An on-site inspection is possible. Redpfx Abjy Ull Ieyju

Condition: ready for operation (used), Year of construction: 2008, - Underfloor suction feeder - Maximum feed width: 36 cm - GUK MCS-106 batch counter Rsdpfsy Rrxajx Abyou - 4 parallel folding pockets - Belt delivery

Condition: new, Year of construction: 2022, sheet width 2065 mm plate thickness 1.20 mm daylight opening 30.0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 500 kg dimensions of the machine ca. 2400 x 1115 x 1500 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Redpfx Abexaat Ieysu Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed Rjdpfxsmck Rys Abyeu - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: excellent (used), Year of construction: 2011, Swivel bending machine Make: Schröder Rodpfx Abslnixijysu model: SPB EVO 3200//4.0 DU used year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Condition: good (used), functionality: fully functional, Year of construction: 2007, Max. machining length: 3000 mm Rodpfx Aboy Rhtgeyju Max. material thickness for iron: 2 mm

Condition: used, Year of construction: 2021, sheet width 2020 mm Rodpfoy Erw Eex Abysu plate thickness 1,5 mm 135 ° 100 mm total power requirement 1 kW weight of the machine ca. 965 kg dimensions of the machine ca. 2680 x 640 x 1100 mm NEW PRICE: 9,990 EURO Description: - Foot operation enables positioning of the sheet metal with both hands - Workpiece clamping and bending process are motorized via a chain drive - Manual adjustment of the bending angle, reading of the angle on a scale ring - Many bending options with segmented upper beam - Precise movement of the bending beam via large flat guides - Heavy, robust welded construction

Condition: used, Year of construction: 2003, Format: 520 mm Rsdpfx Aey T Rbrjbyeu Equipment: Flat stack investors Station 1: 4 Bags Station 2: 4 Bags

Condition: used, Year of construction: 1993, Format: Maximum sheet width 660 mm, maximum length 300 mm. Minimum sheet size: 120 x 100 mm. Product thickness: Maximum 4 mm. Pile height: Maximum 80 cm. Pressing force: 8,000 N Rsdey N Uxmepfx Abyou Infeed height: Adjustable from 360 mm to 960 mm.

Condition: used, Year of construction: 2010, Bundle delivery system Palamides alpha 700 Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Rsdpsy N Up Esfx Abyou Automatic format adjustment in running direction

Condition: used, Year of construction: 2007, Bundle delivery system Palamides alpha 700 Rsdjy N Un Uopfx Abyou Maximum feed-in size: 800 x 330 mm Stack height: 16 cm Triple stream Automatic format adjustment in running direction

Condition: used, Year of construction: 1980, infeed height: 350 mm, Equipment: compressor, 2 pockets Rodpfxjy N Ukvj Abysu Compressor

Condition: used, Year of construction: 2000, 4 pockets Compressor Redpfxoy N Dkre Abyou Paper counting unit

Condition: used, Year of construction: 1991, Equipment: compressor, 6 pockets 2 cross folds Rjdpfx Aboy N Az Asyou Delivery Press delivery SBP 46

Condition: new, - Working width 1020 mm - Max. sheet thickness approx. 2,5 mm (St 40) - Max. Bending angle 135 Accessories: - segmented upper beam - Foot pedal for tensioning - instruction manual Rjdpfx Ajcca Rgebyeu

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Rjdpfx Ajwka S Iobyeu Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Redpfxsy Tn N Hs Abyou

Condition: used, Year of construction: 2021, functionality: fully functional, STC-Ref:G-571-0053 Palamides Gamma 502-HO, Year: 2021 format: 510 x 240 mm Rsdpfxey R A Eqj Abysu equipped: - Dual-purpose cutting device - delivery with banding - pile height max. 12 cm - pile height min. 2 cm - speed 600 pck/hr per nutzen max. - paper size max. 51 x 24 cm - paper size min. 10,5 x 9,5 cm

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Folding unit: 210 mm feed width Output up to 300 sheets/min Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Rsdpfx Aboyuybpsyou Manufacturer: GUK Year of manufacture: 2017 Space requirement: 130 x 70 x 80 cm

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Rodpfoy Tacrex Abyou Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, Semi-automatic can seamer for round cans. Stainless steel version. Can diameter: 42–163 mm, height: 26–300 mm, material thickness: 0.35 mm. Currently equipped for 99 mm. Rodjxn Nqlspfx Abyou

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53600 € 1013.04 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN Rodpfx Abjwiq E Nsyju - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder