Used Krupp Iv Gu 1600X3600 for sale (2,527)

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Nlsdpfezmu I Tsx Ahfjf Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. Nodpfx Aezkivtohfjlf The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: used, axle configuration: 3 axles, first registration: 06/2019, Equipment: ABS, 15 units available, galvanized SAF axles 2 lift axles 1x20 rear flush 2x20 1x30 rear flush 1x40 rear flush 1x45 rear flush ADR Water tank Nljdpfjzfylzsx Ahfsf Toolbox LED lights All offers are subject to change, non-binding, and without warranty. Errors, changes, and prior sale excepted.

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards Nodpfx Aszlaitshfslf – Operating tools – Press plate

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Nlodpjfi Nmuofx Ahfof Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: used, mileage: 16,253 km, power: 81 kW (110.13 HP), first registration: 10/1970, fuel type: diesel, empty load weight: 15,900 kg, maximum load weight: 100 kg, overall weight: 16,000 kg, axle configuration: 4x4, wheelbase: 2,750 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: none, number of seats: 2, Equipment: all wheel drive, cabin, crane, * German vehicle * 1st hand * Condition, see photos * Complete documentation available * Truck-mounted crane from premium manufacturer Krupp * Type GTT 12/Super * Hook height 16.5 m * lateral outreach 13 m * 12 t. lifting capacity * 2 hydraulic extensions Njdpfx Ajvhpxmshfslf * Length 13m = 1.4 t * 9.75m = 2 t. * 5.6m = 4.5 t. * 4m = 8.5 t. * 3.3m = 12 t. * 4 times hydraulically supported * Crane rope with hook block * on 4x4 all-wheel drive chassis * Wheelbase: 2,750 mm * Clear working thanks to fully glazed work/driver's cab * Swivel seat * Differential lock * 5-speed transmission * Leaf suspension * Deutz engine type F6L912 6 cylinder * GVW: 16,000 kg * Self-propelled working machine If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: ready for operation (used), * Brand: Krupp Nodpfx Ajywm Ucehfolf * Dim. rollers: width 250 mm, Ø 650 mm. * Power : two pieces e-motors of 7,5 kW * Incl.: 2 pieces spare rollers.

Condition: ready for operation (used), * Brand: Krupp * Type: 90-8 * Incl.: E-motor, hydraulic system, electric control and new wear parts. Nodpeywmuiofx Ahfjlf * Year of manufacture: 2000

Condition: ready for operation (used), * Brand: Krupp / Hazemag * Type: CK 803 Nledpsywmhpofx Ahfsf * Surface: 5600 x 1550 mm - 3 decks * Incl.: E-motor and steel construction.

Condition: ready for operation (used), * Brand: Krupp Nsdpfx Ahjywmd Defslf * Type: DU 14 * Surface: 7000 x 1600 mm - 2 decks * Incl.: 30 kW E-motor and springs

Condition: ready for operation (used), * Brand: Krupp * Surface: 5500 x 2100 mm - 2 decks Nledsywmc Tjpfx Ahfsf * Upper deck: sieve opening [] 35mm * Lower deck: sieve opening [] 16 x 3mm * Driving: 22 kW * Incl.: springs and spring consoles * Stock: 2 pieces

Condition: ready for operation (used), * Brand: Krupp * Model: Electro Magnetic Conveyor Belt * Type: heavy duty * Block: L= 1650 x W=1200 x H=600 mm * Power Block: 7,7 kW * Power Drummotor: 5,5 kW * Beltwidth: 1400 mm, A-A = 3200 mm * Speed: 2,5 m/sec. * Incl.: rectifier (new) Njdpfx Aheywmarefelf * Weight: appr. 7500 kg * On stock: 1 piece.

Condition: ready for operation (used), * Brand: Krupp * Model: couplings (unused) * Diameter: from 200mm till 800mm Nlodpfx Ahsywl Rcefsf * Tot. Weight: appr. 25-35 tons

Condition: good (used), For sale is a used double-toggle jaw crusher from Krupp. In good condition, fully functional. 500 x 300 mm, 15 kW – new motor!, new tools. Feed size / material input: max. approx. 250 x 150 mm (with a more powerful motor, e.g. 20/22 kW, also up to 400 x 300 mm), Nlsdowy U Icspfx Ahfjf Setting gap: 35 – 90 mm, Capacity / output: 10 – 30 tons/h.

Condition: new, *IMMEDIATELY AVAILABLE* Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV (MOT): New/2 years • Availability: IMMEDIATELY • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,072 kg • Payload: approx. 2,428 kg • Internal dimensions: 520 x 210 x 30 cm (L x W x H) • Overall external dimensions: 673 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Vehicle Structure: • Floor: 18mm phenolic resin laminated plywood • Side walls: double-walled aluminium • Side wall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: YES • Hydraulics: manual hydraulic • Loading ramp angle: approx. 11° • Overrun device & brake: KNOTT • Frame/chassis: fully welded, hot-dip galvanized steel frame • Extension: no • Lashing eyes: 8 pieces along side edge • Supports: via rear when tilting • Ramp: 1 upright ramp on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Parabolic spring axle (leaf spring) for extreme loads and driving comfort • Fold-down aluminium side walls • Welded side wall/frame construction made from sheet steel, hot-dip galvanized by immersion • Very robust bolted V-drawbar, reinforced • 30 cm high side walls • Hot-dip galvanized steel loading ramp, upright • Very robust fully welded steel frame • Frame completely hot-dip galvanized by immersion • Rubber suspension axle • Multiple reinforced cross members for high point loading capacity • Lashing rings mounted on the outer frame, 8 pieces (4 pairs) • Automatic reverse • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in rear frame • Rear side marker lights • Automatic centrally mounted jockey wheel • Registration documents: ZBII & COC papers Optional Accessories – available on request: • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps Nsdpfx Aeyyw Rgshfslf • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle registration documents can be sent in advance or temporary plates (Germany) can be provided. - Export plates incl. customs clearance available All descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer & service workshop for over 30 years for the following brands: Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix and many more. - Subject to errors, mistakes, and prior sale -

Condition: new, * IMMEDIATELY AVAILABLE * SPECIAL PRICE for STOCK VEHICLE! Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,164 kg • Payload: approx. 2,336 kg • Internal dimensions: 620 x 210 x 30 cm (L x W x H) • Overall external dimensions: 773 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Superstructure: • Floor: 18 mm phenolic plywood • Side walls: Double-walled aluminium • Side wall height: 30 cm • Suspension: KNOTT parabolic suspension • Tilting function: YES • Hydraulics: Manual hydraulics • Loading angle: approx. 10° • Overrun device & brakes: KNOTT • Frame/chassis: Welded, hot-dip galvanized steel frame • Extension sides: none • Lashing eyes: 10 along the sides • Props: via rear for tilting • Ramp: 1 upright on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC papers Standard equipment: • Parabolic leaf-spring axle for heavy-duty loads and driving comfort • Foldable aluminium side walls • Welded steel sheet side wall/frame construction, hot-dip galvanized by immersion • Reinforced, very stable bolted V-drawbar • Side walls 30 cm high • Hot-dip galvanized steel ramp, upright • Very stable welded steel frame • Complete hot-dip galvanized frame • Rubber spring axle • Numerous stable cross members for high point loads • Lashing rings mounted on outer frame, 10 pcs (5 pairs) • Automatic reversing system • KNOTT overrun device and parking brake • Robust ramp locks • 13-pin plug • Reverse light • Large, safety-sized lighting • Integrated rear fog light • Rear frame recessed lighting • Rear side position lights • Automatic centre jockey wheel • Registration documents: ZBII & COC papers Optional accessories (on request): • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reverse light • Lashing straps • and much more New vehicle with warranty and TÜV certificate. ————— - Financing or leasing available - Nationwide delivery available - All prices include VAT - Advance shipment of vehicle registration document possible, or temporary license plates (Germany) can be provided - Export license plates incl. customs clearance available Descriptions and photos are copyright protected!! Nledpfx Ahsyyw Rmsfsf Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from us! We have been specialist dealers & repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes, and prior sale excepted -

Condition: new, empty load weight: 716 kg, maximum load weight: 2,784 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,200 mm, loading space width: 204 mm, loading space height: 40 mm, color: silver, construction height: 700 mm, working width: 2,110 mm, Hydraulics, automatic reverse drive, drive-on ramps / parabolic suspension / cable winch, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. Drive-on ramps / parabolic suspension / cable winch TECHNICAL DATA - Make: Variant - Model: 3521 L4 - Vehicle type: Car transporter/construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 420 x 204 x 4 cm - External dimensions (LxWxH): 589 x 211 x 70 cm - Loading height of floor: 59 cm - Perm. Total weight: 3,500 kg - Unladen weight: 716 kg - Payload: 2,784 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic spring axle - Support wheel: Yes, reinforced - 100 km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 2 - Floor: Aluminium floor - Loading area: Closed loading area - Drop sides: Railing - Drop side height: 4 cm - Removable drop sides: - - Tipping / lowering function: None - Hydraulic pump: - - Battery loading function: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Steel mudguards - Spare wheel: Optional, can be retrofitted - Wheel stopper: Optional, can be retrofitted - Cable winch & winch stand: Yes - Ramp shaft: Yes - Ramps/ramp flap: Yes - Ramp type: Single ramps - Ramp load: 4.000 kg - Drive-on angle: approx. 14 - Supports: Optional, retrofittable - Lashing eyes: 10 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Standard equipment: - Full aluminium floor, with anti-slip coating - Extremely stable welded frame - Cable winch with cable winch bracket standard - Cable winch removable and can be inserted on the left or right, as well as adjustable in length - Perforation in the outer frame profile for optional wheel stopper bracket - Frame compl. hot-dip galvanized - drive-on ramps, reinforced ALU can be inserted under the loading area, L=250cm - very low chassis for low drive-on angle - 10x lashing eye mounted in the frame (500dAN/kg) - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving licence - lockable coupling head - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving licence - return driving licence. plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - lane departure lights at the rear - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - high tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocho Nlsdpfx Ahsu Hrxdjfsf

Condition: new, incl. aluminium floor / ramp compartment with ramps / many lashing points / manual hand winch Technical Data: • Brand: Martz • Model: GT PLATEAU 500 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 507 x 211 x 0 cm • External dimensions (LxWxH): 657 x 215 x 97 cm • Perm. total weight: 3,500 kg • Unladen weight: 764 kg • Payload: 2,736 kg • Chassis: Platform trailer (wheels under the bed) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Aluminium profile floor • incl. manual hand winch with brake • Loading ramp compartment underneath deck Nlsdpfxjx Tbito Ahfef • 2x steel ramps for loading • Aluminium side walls can be retrofitted at any time • Insert sleeves at all 4 corners for tarp bows, mesh extension, side wall extensions, or raised front panel • Very robust welded steel frame • Frame fully hot-dip galvanised by immersion • Very low chassis for a minimal approach angle • Numerous continuous cross-members welded in for high point load capacity • 10x recessed lashing rings in side frame profile (600dAN/kg) certified • Automatic reverse mechanism • KNOTT overrun clutch and parking brake • Reinforced, very stable V-drawbar • 13-pin plug • Reverse lights • Large, heavy-duty safety lighting • Integrated rear fog light • Rear frame lighting recess-mounted • Rear LED side marker lights • Automatic jockey wheel Optional accessories – available on request: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • and more. Brand new vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or transport plates (Germany) can be provided. - Export plates incl. customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialists and a repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted -

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Nledpfx Ajdzqddjhfsf Good condition (very little use)

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t Nsdpfewy Sqzox Ahfjlf

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. Nledpfxsywcr De Ahfef ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), A used Krupp-Esch cone crusher (gyratory granulator) Type KG1 is offered: Feed size: 5 - 50 mm, 36 kW, Weight: 6 t. With pre-screening double-deck screen 0.80 x 2.00 m. In very good condition. Njdpfewy U Sujx Ahfslf

Condition: used, functionality: unexamined, Year of construction: 1963, Used double-shaft hammer crusher KRUPP DHB 1604, feed opening approx. 1600 x 1480 mm, capacity up to 400-500 t/h, final grain size 0-30 mm, max. feed size 1000 x 800 x 500 mm. Particularly suitable for the cement industry, for processing moist materials such as limestone, clay, marl. Weight approx. 60 t. Nlodpexcxrzsfx Ahfsf

Condition: new, Year of construction: 2016, -1- unused pressure plate for Krupp, O&K, Weserhütte ES jaw crusher EB 1200 x 960, dimensions approx. 1150 x 530 x 130 mm, wedge 70 mm Nsdpfx Aewqf Dpjhfslf

Condition: like new (used), mileage: 240,000 km, fuel type: diesel, emission class: euro6, Year of construction: 2019, OPEL VIVARO, 2019, ISOTHERMIC VAN WITH REFRIGERATION UNIT, SPECIFICALLY DESIGNED FOR THE TRANSPORT OF BLOOD OR ORGANS, WITH DUAL TEMPERATURE CONTROL. COMPLETE WITH FLASHING LIGHT AND SIREN. 240,000 KM. VEHICLE IN PERFECT CONDITION. Nsdpfewxx Nzjx Ahfslf