Used Krone Swap Body Semitrailer for sale (15,010)

Condition: new, loading space length: 5,300 mm, loading space width: 2,300 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane ELLERMANN roll-off container according to DIN 30722-1 Standard container Type S 77 with crane platform Internal dimensions: approx. 6.5/5.3 x 2.3 x 2.0 meters (all dimensions are approximate) Usable volume: approx. 24 m³ Paint finish: RAL 7016 (anthracite gray) ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outer rollers and subframe made of INP 180 Outer rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support is reinforced with 10 mm knee plates ? Crane platform 20 mm thick on the end face, length approx. 1,200 mm Reinforcement on the end wall support and subframe on the inside Additional stiffening on the end support ? Crane cutout on the end wall (according to Fassi drawings) ? Bottom pan made of 5 mm St 37.2 (S235JR) ? Side walls made of 3 mm St 37.2 (S235JR) ? Rounded bottom pan, raised approx. 250 mm towards the side wall ? End profile made of sturdy round tube Ø 90 mm ? Spant spacing 750 mm Spant profile U 80 x 50 mm ? On both sides, 1 x transverse spant in the middle, fully welded ? Double-wing door at the rear with Dutch door latch and lateral safety central locking system according to UVV Safety central locking system extended to 2,000 mm Door latch with container door opening aid and hockey lock Additional opening handle on the left door leaf ? All-around tarpaulin and net hooks ? Container primed once on the inside, primed twice on the outside and painted twice in a single color on the outside ? UVV stickers with safety instructions ? Container inspected and approved according to DGUV Rule 214-017 (formerly BGR 186) ? Container inspection book (digitized) for documenting the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection when the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° all hydraulic cylinders are double-acting piston rods are hard-chrome plated double knee joint system with PROLINK (over-extension of the knuckle arm up to 15°) electronic overload shut-off device with FX500 6 functions RCH or RCS radio remote control (linear levers) with display and XP system emergency shut-off and optical alarm (90% and 100%) including digital slewing limitation, adjustable FASSI stability control FSC incl. LMB II pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable on one side separate hydraulic tank (90 l) with filter, mounted on the crane base extendable on both sides, support width 4.60 m, hydraulic support ? CE, incl. M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black load hook and attachment brackets (short / 500 mm) Transport position: folded across the direction of travel Lsdpfszq Iu Usx Afkeaf Dead point above the support beam Note: Observe on-board voltage / 12V or 24V, standard 24V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work spotlight on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose lines / eactive Slewing valve, only for cranes with rack and pinion Quick-action valve for the outriggers Additional cos

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request Ledpfx Afszq Iu Iskjaf ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: new, maximum load weight: 12,200 kg, overall weight: 15,000 kg, loading space length: 7,005 mm, loading space width: 2,300 mm, loading space height: 2,200 mm, loading space volume: 37 m³, total width: 2,450 mm, total height: 2,450 mm, Year of construction: 2026, Brand new roll-off container for building rubble, waste etc. * Steel container in lightweight design * 50 mm support bracket Laodpfxsmxgi Ho Afkjf * Rear doors with safety lock * Steel floor 5 mm * Right-sided access at the front * Tarpaulin holders on all sides * Capacity 37 cbm * Tare weight approx. 2,800 kg * Initial container inspection according to BGI 5005 Further containers in heavy-duty design DIN 30722 part with 60 mm support bracket in stock. For further information please do not hesitate to contact us

Condition: used, first registration: 12/2022, New overseas container with only one trip Steel container with rear doors. Wooden floor, etc... Lsdpfx Aovw Hmgsfksaf On request and for an additional charge also with interior fittings as an office, sanitary or residential container. Price is ex works. Rental period at least 1 month / 30 days Short-term rental up to 3 months 4.00¤ / day, rental period longer than months 3.00¤ / day After the end of the minimum rental period, billing is done on a daily basis. Plus the costs for delivery and collection. Also available in 40ft 10ft or 8ft on request.

Condition: used, first registration: 12/2025, 10-Foot Container Sauna Mobile outdoor sauna based on a 10-foot shipping container (external dimensions approx. 3.0 m length × 2.44 m width × 2.59 m height), repurposed into a fully equipped sauna with glass front, multi-level benches, and technical installations. The structure retains the robust steel construction of the container as a weatherproof outer frame, complemented by high-quality wood interiors, insulation, and glass glazing for optimal outdoor use. It is stackable, easily transportable, and designed for installation on level ground without a foundation. Base structure and exterior * Container made from powder-coated steel (anthracite grey) with ISO corner fittings and reinforced profiles for stability and weather resistance. * Fully open longitudinal side with a three-part glass front made of clear safety glass (sliding doors with stainless steel handles and floor seal) for panoramic views and natural light. * External fittings: cold water column with tap and ball valve, optional shower with spray head, ventilation opening with grille at the base of the container. Interior and sauna setup Walls, ceiling, and floor fully clad in thermally treated wood (e.g., spruce or aspen, light natural color) 14-20 mm thick, three-tier seating benches with backrests and footrest. * Bench configuration: lower bench approx. 40 cm high, middle approx. 90 cm, upper approx. 140 cm; ventilated slat construction for airflow and comfort. * Floor equipped with sealed wooden decking and drain, small headrest, and integrated stone unit at the heater. Technical features and equipment Electric sauna heater (approx. 6-9 kW) with stone basket (about 20 kg olivine stones), wall-mounted control panel, and automatic overheating protection. * Ventilation: fresh and exhaust air vents with sliders (internal and external), smoke outlet and grill at ceiling/wall, indirect LED lighting behind benches. * Electrical installation: protected wiring with switches for heater and lights, integrated thermometer and hygrometer. Installation and mobility Set up on container feet directly on gravel or concrete, total weight approx. 1,200-1,800 kg, ventilated and drained. Ledpfxex Nb E Tj Afkjaf * Transport possible via forklift or crane, weather-protected seals on all openings.

Condition: new, overall weight: 34,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, Semi-trailer as roll-off tipper from our own production. Various versions available. As a road or agricultural version for agrotruck tractors 2-axle trailer with a gross train weight of 38,000 kg. Hook lift system 25-30 to. various container lengths Various roller heights Various coupling heights Radio remote control hyd. locking Automatic lowering when hydraulic system is started up various tires possible, e.g. Michelin XL Laodsvw Hl Nspfx Afksf Further information on request.

Condition: new, empty load weight: 4,830 kg, overall weight: 44,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, suspension: air, tire size: 385/55R22,5, Equipment: ABS, truck registration, | D-Tec VCC Container Chassis | Center and rear extension | 1st axle can be lifted | VALX axles with disc brakes | Tires: 385/55 R22.5 | New vehicles | Subject to errors, typing errors, and prior sale. Ljdpszrxbhsfx Afksaf

Condition: used, empty load weight: 5,130 kg, maximum load weight: 34,870 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 12/2014, next inspection (TÜV): 03/2027, total length: 24,800 mm, total width: 12,500 mm, total height: 126,400 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2014, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, anti-spray, brake: disc brake, suspension: air-lift, lifting and lowering, lift axle: 1st axle, 1x20/2x20/1x30/1x40, 2x7 + 15-pin power connections, Carrier genset model 69UG15-050S-05 from 04/2011, 10,518 operating hours, HighCube, pneumatically extendable rear, 2x reversing lights LED. Lajdpfx Afszpa U Doksf

Condition: used, maximum load weight: 37,840 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2018, next inspection (TÜV): 08/2028, Year of construction: 2018, Equipment: ABS, Internal vehicle number: G400099 Available immediately at our location in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Extendable Unladen weight: 5,450 kg Lsdpfjyx N R Asx Afkeaf Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 5,240 kg, maximum load weight: 35,760 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, suspension: air, tire size: 385/55 22,5, tire condition: 30 %, wheelbase: 1,310 mm, color: black, Year of construction: 2020, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ljdpfx Ajzd Nvgsfkjaf Please contact our trained specialists; we will be happy to advise you.

Condition: used, first registration: 10/2023, 20 ft office/team container NEW, incl. VAT RAL 9002 white gray with forklift pockets immediately available from stock Petershagen Equipped with 1 steel entrance door 1 1-leaf D/K window with roller shutter 1 electric heater 2 kW Lighting and sockets Insulation: Floor 100 mm Roof 100 mm Lasdpfx Afovw Hlvsksf Wall 100 mm From stock Petershagen, immediately available Delivery possible on request. Please contact us. We offer containers in all sizes and designs, also equipped according to your wishes. Office/crew containers, sanitary containers, insulated sea containers, with windows, doors, flaps, ventilation grilles and much more. Please contact us.

Condition: used, empty load weight: 4,160 kg, maximum load weight: 34,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Location: Bovenden, 3 axles, BPW axles, air suspension, ABS (anti-lock braking system), underrun protection, front support legs, side aluminium side protection, landing gears. Superstructure: 3-axle container chassis for ISO and tank containers 20ft/30ft with ADR, 3x 9t BPW axles, drum brakes! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Laodpfx Aowt Dr Refksf

Condition: used, maximum load weight: 37,840 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 07/2013, total width: 2,500 mm, total height: 1,650 mm, Year of construction: 2013, Equipment: ABS, BROSHUIS MFCC – 1 x 40’ – 1 x 30’ – 2 x 20’ – LIFT – BPW – ----VEHICLE HISTORY 1st HAND GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----Broshuis Interchangeable Chassis 40 ft – German Vehicle * Well-maintained condition * Video available upon request Ljdezn Eknopfx Afksaf Superstructure* Interchangeable chassis / Container chassis * 3-axle * BPW axles * Disc brakes * Air suspension * Lift axle * ABS * Underride protection Suitable for* 2 x 20 ft containers * 1 x 30 ft container * 1 x 40 ft container Tires* Tire size: 385/65 R22.5 Condition* Immediately ready for use * Well-maintained overall condition ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2000 € * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2000 € ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES, AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least 500.00 € / 1,000.00 € will be charged. Subject to change, errors and prior sale! You can find more vehicles on our homepage: Sales are made exclusively according to our general terms and conditions – see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, maximum load weight: 12,700 kg, overall weight: 15,000 kg, loading space volume: 15 m³, total height: 1,600 mm, Year of construction: 2026, Roll-off container, 15 m³ – New – Black or White – Immediately available Description: New, high-quality 15 m³ roll-off container – ideal for construction companies, waste disposal companies, landscaping and gardening businesses, and container services. Immediately available in black or white. Technical data: Volume: 15 m³ * Year of manufacture: 06/2026 * Length: 6,900 mm * Height: 1,600 mm * Tare weight: 2,300 kg * Permissible total weight: 15,000 kg Lodpfozmkxnex Afkeaf * Locking dimension: 3,890 mm * Robust steel construction * Several lashing points on the sides * Hook receptacle * High-quality paint finish Available colors: Black * White Other colors available upon request. Financing & Delivery: We would be happy to offer you delivery throughout Europe, as well as attractive financing and leasing options. For further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Brand-new roll-off container with side walls Laedpfswx Tr Dsx Afkjf

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Lodpozkx Ifsfx Afkeaf Orange

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o Ledpfjzkx Hzox Afkjaf

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). Laedezkx Hnjpfx Afkof 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: used, empty load weight: 2,850 kg, maximum load weight: 27,150 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 02/2006, suspension: steel, tire size: 385/55R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, leaf spring suspension, ABS (anti-lock braking system), container locking mechanism, U-shaped guard, side aluminum fender, supports. Lodpfx Ajzmy Ncofksaf Superstructure: Interchangeable chassis trailer for 20-foot containers, 2x BPW axles, drum brakes! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, empty load weight: 5,050 kg, maximum load weight: 35,950 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 12/2016, next inspection (TÜV): 07/2026, suspension: air, tire size: 385/55R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, 1st and 3rd axles liftable, raising and lowering function, ABS (anti-lock braking system), extendable, container locking, U-shaped protection, side aluminum fender, supports. Superstructure: Interchangeable platform trailer for 20/2x20/30/40 foot containers with pneumatic rear extension, 3x 9-ton SAF axles, disc brakes, 1st and 3rd axles liftable, SAF Tire Pilot tire inflation system, rear pneumatically extendable! Laedpfx Aezmy I Eofksf Fifth wheel height approx. 1130mm! Optional, with undercarriage power generator CARRIER PowerLINE UG15 for an additional EUR 5,500, see -89890-! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, empty load weight: 4,551 kg, maximum load weight: 39,449 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 11/2019, next inspection (TÜV): 05/2027, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2019, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, brakes: disc brakes, suspension: air suspension with lift function, lifting and lowering, lift axle on axle 1 and 3, 2x7 + 15-pin electrical connectors, central extension, 1x20/2x20/1x30/1x40/1x45, aluminum wheels, Transcool Genset Compact 16, rear extension, 2x LED reversing lights. Laedjzkwa Tepfx Afkof

Condition: used, maximum load weight: 35,575 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2014, loading space length: 7,900 mm, loading space width: 2,535 mm, loading space height: 1,330 mm, loading space volume: 24 m³, total width: 2,535 mm, total height: 1,330 mm, According to our "General and Special Terms and Conditions" and without any guarantee or warranty, we can offer you the following vehicle, subject to prior sale, errors and omissions excepted, and non-binding until contract completion: Laedpfx Afozmphzoksf Schmitz 20" tank container chassis with tank container Schmitz chassis (Vehicle 180) First registration: 27.02.2014 Perm. GVW: 39,000 kg Unladen weight: 3,425 kg Payload: 35,575 kg TÜV valid until 09/2024, SP until 03/2024 Pneumatic tube compartment front right (passenger side) 2 x 12 t geared landing legs Fire extinguisher box Air suspension with raise & lower function ALCOA alloy wheels Tyres: 385/65R22.5 1.) approx. 50/50%, 2.) approx. 70/50%, 3.) approx. 40/40% Wheel chock Price: €8,000 (net) Additionally: 20" Tank Container BURG Manufactured: 11/2008 Perm. GVW: 36,000 kg Unladen weight: 3,660 kg Payload: 32,340 kg 24,000 liters External thermometer / temperature gauge 1 compartment No baffle plate Outlet at rear Top catwalk Tank internally rubber-lined Not suitable for oils Good for saline solutions, AHL, and other liquids Price: €10,500 (net) Complete package: €17,000 (net) All information provided without guarantee or warranty. Our “General and Special Terms and Conditions” apply. Legal venue for both parties up to a disputed amount of €50,000.00 is the District Court (Amtsgericht) Ludwigslust; for higher amounts, the Regional Court (Landgericht) Schwerin. Subject to errors, typing mistakes, and prior sale.

Condition: new, loading space length: 5,200 mm, loading space width: 2,300 mm, loading space height: 1,350 mm, loading space volume: 10 m³, Year of construction: 2026, ThermoSTAR OK18 AS-2 Thermocontainer / Asphalt Thermal Container Manufacturer: OK ThermoSTAR * Model: OK18 AS-2 * Year of manufacture: 2026 * Condition: New * 2 units available * Suitable for 3-axle / 4-axle hooklift trucks * Hook height: 1,570 mm * Volume: approx. 10.5 m³ * Insulation made of 120 mm insulating material * External dimensions: * Body length: 5,200 mm * Body width: 2,300 mm * Body height: 1,350 mm * Total length with hooklift frame: 6,145 mm Equipment: Two-chamber system 60/40 * Two mechanical hand sliders * Mechanically folding aluminium hollow profile thermal lid * Aluminium tread platform with ladder and safety rail * Water tank system with 300 l tank * Pneumatic cylinder for asphalt paver feeding * Floor plates made of Hardox 450 * 4 crane lifting eyes * Universal mount for release agent sprayer * Rollers for container unloading made of steel * DIN EN 30722 locking system * External cladding made of aluminium chequer plate * Red and white safety markings Paintwork: * Base frame in MB7350 Nova grey * External cladding natural aluminium Ledpfxey Sqq Rj Afkeaf Immediately available. Financing and delivery possible. For further information, we are happy to assist you.

Condition: used, maximum load weight: 38,274 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 11/2012, next inspection (TÜV): 04/2027, total width: 2,550 mm, Year of construction: 2012, Additional information: Ledpfozdm Igex Afkjaf * Type | First axle: Goodyear R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors. The stated prices do not include BPM and are only valid for export.

Condition: used, maximum load weight: 35,575 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2014, loading space length: 7,900 mm, loading space width: 2,535 mm, loading space volume: 24 m³, total width: 2,535 mm, total height: 1,330 mm, Equipment: ABS, In accordance with our "General and Stipulated Terms and Conditions," and without any warranty or guarantee, we can offer you the following vehicle today, subject to prior sale, errors, and typing mistakes: Schmitz 20" Tank Container Chassis with Tank Container Schmitz Chassis (Vehicle 178) First registration: 27.02.2014 Permissible total weight: 39,000 kg Unladen weight: 3,425 kg Payload: 35,575 kg TÜV (MOT): 09/2024, Safety Inspection: 03/2024 Recorded mileage on odometer: 424,676 km Tube stowage compartment front passenger side 2 x 12 t gear support winches Fire extinguisher box Air suspension with lift & lower function ALCOA aluminum rims Tyres 385/65R22.5 1.) approx. 90/90%, 2.) approx. 40/40%, 3.) approx. 50/80% Wheel chock Price: €8,000.00 (net) Additionally: 20" Tank Container BURG Manufactured: 11/2008 Permissible total weight: 36,000 kg Laodozlcauepfx Afksf Unladen weight: 3,660 kg Payload: 32,340 kg Capacity: 24,000 liters External thermometer/ temperature display 1 compartment No baffle wall Outlet at rear Walkway on top Tank rubber-coated on the inside Not suitable for oils Suitable for saline solutions, AHL, and other liquids Price: €8,000.00 (net) Complete package: €15,000.00 (net) All information provided without any warranty or guarantee. Our "General and Stipulated Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court of Ludwigslust, for higher values, the Regional Court of Schwerin. Errors, typing mistakes, and prior sale reserved.