Used Kohmann Miscellaneous for sale (281)

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Iiodpfxsycnf So Aatof Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Year of construction: 2016, Format: 0x0 Iiodpfx Aoyxqwkjatsf Equipment: Mechanical speed: 250 pieces/hour

Condition: used, Year of construction: 1994, Format: 0x0 Isdpfjzfwkbsx Aatoif Equipment: 4 head paper drills Foot control Technical data: Number of drill heads: 4x Drill bit diameter: 3 - 14 mm Drilling distance: 1 - 420 mm Stack height: 50 mm Speed: 680 - 2,900 rpm

Condition: used, Format: 0x0 Isdpsy Dudxofx Aatsif Equipment: 2 spindles

Condition: used, Format: 385 x 700 mm Equipment: Max sheet size 700mm x 385mm Min sheet size 210mm x 140mm Iiedpoy Dufiefx Aatjf Min paper thickness 110mm Max paper weight 400gsm Speed 6000 (A4 creased and folded) Dimensions (L)2020mm (W)680mm (H)1265mm Power supply 240v 50/60hz Weight 190kg???s

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) Ijdszcp D Nspfx Aatsif 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: used, Format: 0x0 Iodpfx Aoyf Ih Sjatsif Equipment: With hot glue machine

Condition: excellent (used), Year of construction: 1983, Description to follow! Isdpfx Aasyrtv Ijtjif

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK ONE NCU 1750, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 In general: System:Industrial DED system Safety:Vacuum lock and inert gas purging Year of manufacture:2022 Weight:approx. 7,500 kg Geometry: Number of axes:5-axis kinematics with automatic tool changer Travel ranges (x/y/z):650×400×400 mm Table diameter:400 mm Table load capacity (max.):100 kg Measurement:Renishaw probe Lasers & Optics: Laser:Dual IPG laser Fine machining:500 W (IPG fiber laser, 200 µm fiber) High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber) Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro cladding Control unit: Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24" SIMATIC touch panel Process preparation:Via Siemens NX CAM and edge computing (IPC 427e) Monitoring:Live process control via HMI Display Manager and sensors for the chamber atmosphere Electrical specifications: Total power:62 kW. Iiedpfx Aasyy Hgketsf Current:110 A. Voltage:3×400 V / 50 Hz (control circuit Materials used: Material:Two Medicoat powder conveyors for titanium (Ti64), nickel-based alloys, steel, and hard materials

Condition: used, Year of construction: 2008, Format: 300 x 450 mm Equipment: max. screen frame size 500 x 750 mm table height 945 + 30 mm screen lift height 300 mm max. printing speed 100 - 500 mm/sec. Iodpfx Aaeyzrupotsif max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg

Condition: used, The equipment in question is a vertical stack delivery system with an integrated pressing station, manufactured by Lega. This specific model is identified as type 30/55 and bears the serial number 32323. Currently, the equipment is in stock and located in Germany. It is reported to be in good condition, making it ready for immediate use or integration into existing operations. Iiedpfjwzxzcsx Aatjf Format: Equipment: Vertical stack delivery with pressing station Good condition

Condition: used, Year of construction: 2006, Format: 1250 x 800 mm Ijdoy Agg Nepfx Aatsif Equipment: Automatic lifting cycle controlled by a photocell or manual mode, fast operation. lifting height approx. 840 mm, machine height approx. 2000 mm Lifting Capacity: 1000 kg 380V power supply

Condition: used, Format: 762 x 530 mm Equipment: details on Request Iodpfx Aaex N Tz Tstjif

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Fixed/Live Center Design Ijdpfx Ajzn U S Ieatjif MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Grinding wheel guard fully open when door is open Miscellaneous Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: used, Year of construction: 1973, The Hohner Favorit, manufactured in 1973 with serial number 1248, is a classic stitching machine built for durability and reliable performance. With a stitching capacity of up to 25 mm, it remains a practical solution for a wide range of binding applications. Currently located in Germany, the machine is in good condition without any damage, reflecting its robust construction and careful maintenance over the years. Renowned for its solid engineering, the Hohner Favorit continues to be a dependable choice for printshops and finishing operations seeking a straightforward, long-lasting stitching solution. Format: 25 mm Iisdpfexb Dpcjx Aatof Equipment: Good condition without any damage

Condition: used, Year of construction: 1992, operating hours: 10,855 h, power: 92 kW (125.09 HP), Equipment: ABS, all wheel drive, cabin, Unimog 427/10 Winter Service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase: 2640 mm * Tires: 14.5R20 * Remaining tire tread: approx. 90/50% front, 80/50% rear * 1 diesel tank * Trailer coupling * Front and rear PTO * Front and rear hydraulic connections * Snowplow mounting kit * Raised exhaust Body * Küpper-Weisser HD, year of manufacture 1992, 1.7 m³ grit spreader body * Spreader can be parked on supports * Three-way tipper Cab / Driver's cabin * 2-seater * Roof hatch * Beacon lights Iiodowyy N Eopfx Aatjf Engine / Transmission * 5,958 cm³ * Manual transmission * 312,656 km Weights * Gross weight: 7,500 kg * Payload: 3,000 kg * Curb weight: 4,500 kg Miscellaneous * German vehicle * 1 previous owner New general inspections / safety inspections or load reductions/increases are available on request. We are happy to assist you in obtaining export/transfer license plates. Delivery of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for misprints, typographical errors, prior sale, or changes!—Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², a large selection of vehicles can be found. Our company philosophy is characterized by fairness and credibility. Because customer satisfaction is particularly important to us, we offer our clients an excellent all-around service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, Year of construction: 2007, Format: 1360 x 1200 mm Equipment: Iiedpfx Aajyxqvgetef Automatic palletizing PC control with batch view Layer formation Pallet dimensions: 1360 x 1200 - 1000 x 800 Speed: 30 stacks/min.

Condition: used, Year of construction: 2010, The Mailmaster 565HS, manufactured by KAS in 2010, is currently in stock and located in Germany. This machine is in good condition with no damages and is configured with FSFi for faster intake, featuring 6 attachment stations. It can handle envelope formats from DL to C5 and operates at a speed of up to 7,000 cycles per hour. The delivery terms are FCA. Equipment: Iisdpfx Asvfxqaeatef Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage

Condition: used, Year of construction: 1966, This machine is an E. Bickel Perforation HK 3-61, manufactured in 1966, with the serial number 8716. It is designed to handle a size of 610 mm and is currently in stock in Germany. The price is available upon request. Iiedpfx Aajw Emuxetef The machine is in good condition without any damages. It is suitable for use in perforating or grooving work. Format: 610 mm Equipment: Good condition without any damage For use in perforating or grooving work

Condition: used, Format: 0x0 Iedpfxsyz Acke Aatoif Equipment: drilling heads:1 With accessories

Condition: used, Year of construction: 1981, Format: 680 mm Iedpfjy Dufcox Aatoif Equipment: with 1x perforating tools with 1x creasing tools perforating machine with electric motor

Condition: used, The Josef Foellmer Iram 16, serial number 2037, is a robust four-head paper drilling machine designed for precision and efficiency in professional finishing environments. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting its durability and careful maintenance. With its four drilling heads, the Iram 16 offers flexibility for a variety of drilling patterns and applications, making it a reliable solution for bindery and finishing operations that require accuracy, consistency, and productivity. Isdsxb Dpispfx Aatjif Equipment: Good condition without any damage 4 head paper drills

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Iisdpfx Aovphzijatef Format: Equipment: 40 nozzles for consistent adhesive application

Condition: used, This Poege Letterpress is a historic museum piece, manufactured in 1900. Currently in storage and located in Germany, this item is a significant artifact from the early days of printing technology. This piece is ideal for collectors, museums, or educational institutions focused on preserving and showcasing the evolution of printing machinery. Format: Iisdovfx Tnepfx Aatof Equipment: Letterpress, perfect for Collectors or Museum

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Equipment: Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Ijdpfx Aaoyxqxbotoif Maximum mechanical speed 6,000 cycles/hour