Used Kimla Lf 1020 Powercut 2 Kw for sale (92,000)

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Gear pump type: 1 547 220 500 / -with tank and control valve Fpodpfx Afjidmy Dskoh -Drive: 24V 2kW -Dimensions: 140/200/H370 mm -Weight: 10kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: Rüetschi, electric motor type RAF 90 L-4/2 -Power: 1.5/2 kW -Speed: 1400/2800 rpm -Shaft: Ø 22 x 40 mm Fsdevzx Uqopfx Afkeph -Design: B5 -Dimensions: 325/215/H180 mm -Weight: 15.3 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speeds: 2 rpm -Power: 0.075 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Dimensions: 250/140/H120 mm Fpodpecwqd Defx Afkjh -Weight: 4.5 kg

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor Fpjdpfxjd Al Hfe Afksh -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Condition: used, Gear motor, electric motor, electric gear motor -Motor: VEM type KR 63,1/2 S -Power: 0.18 kW -Voltage: 220/380 volts Fpsdpfsfdta Rex Afkoh -Construction: B5 angle -Shaft: Ø 22 mm with driver slot -Protection class: IP44 -Dimensions: 300/170/H180 mm -Weight: 8.4 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 3000 rpm -Power: 2 kW -Design: B5 -Shaft diameter: Ø 19 mm -Number: 2 motors available Fsdpfedqck Ejx Afkoph -Price: per piece -Dimensions: 500/165/H210 mm -Weight: 9.2 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 Fpsdpfsiz Dr Hex Afkeh -Hydraulic pump: Type Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Fpsdpfeyi Ex Nex Afkoh

Condition: good (used), Electric motor, three-phase motor, fan motor, external rotor motor for fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, electric motor fan motor external rotor motor -Type: MK 115-GDK.12.N -Power: 0.35 KW / 380 V -Speed: 1400/1020/710 rpm -Protection class: IP 54 -Dimensions: Ø 190 x 170 mm -Weight: 11.1 kg Fpsdsv Ibb Hjpfx Afkjh

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material Fpjdpfxjyk I U As Afkoh - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Fsdpfxew S Hnqj Afkjph -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min -Individual components: see photos -Dimensions: 760/435/H825 mm -Weight: 206 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 247580, 247422, Type: P140/9/SG51/1K/RT45 Fsdpfx Aoy Agh Hofkeph Power: 9.8 kW Maximum operating temperature: 140 °C Medium: water Pressurized temperature control unit Two units available Price: 950 EUR per unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Fpedpfx Ajycf N Iofkeh

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: A05L503370, continuous power (apparent): 350 kVA, continuous power: 280 kW (380.69 HP), protection type (IP code): IP23, 2 Stamford generators No.1 year of manufacture: 2005 No.2 year of manufacture: 2015 Fpsdpjx Sp Twofx Afkjh dismantled can also be sold individually Were part of a Schnell Scania CHP unit (250 kW) Professionally refitted and thoroughly cleaned by a specialist company

Condition: excellent (used), Year of construction: 2008, Technical Data: Laser type: CO2 Travel: X-axis: 1260 mm Y-axis: 1260 mm Z-axis: 100 mm Max. workpiece dimensions: 1250 x 1250 mm Max. workpiece weight: 160 kg Laser power: 2 kW Cutting capacity (steel): 12 mm Control: FANUC 16 iL Resonator: FANUC AF 2000 Compressed air requirement: 20 m³/h Electrical connection: 400 V / 50 Hz Fsdpfx Afjyigrzoksph Connected load: 70 kVA Dimensions (L x W x H): approx. 3200 x 2200 x 2100 mm Weight: approx. 4.2 t Special equipment: HS-2003 sensor cutting head High-pressure cutting device: Clean Cut Aluminum cutting device: Alu Cut Exhaust system Cooling unit The seller accepts no liability for typing or data transmission errors. The machine's visual and technical condition, as well as wear, correspond to its age; used machines are sold without any warranty.

Condition: new, Heating capacity 30 kW Dimensions (L/W/H) 105 cm x 60 cm x 147 cm cm - NEW -Kanuk Turbo 2 *new look*hot air stoveincl. heat exchanger and hot air blowernominal heat output 30 kWdimensions 105 cm x 60 cm x 147 cmheatable room volume 1000 m³log length 80 cmefficiency 82,4 %flue pipe connection 150 mmitem no. 2100006 Fsdpfovxa Itsx Afkeph

Condition: used, functionality: fully functional, 2-bag sawdust extractor 4.0 kW – serviced, ready for operation Specification: Fsdpfx Afoy Ddm Askoph • Condition – used • Turbine motor power – 4.0 kW (3-phase) • Turbine inlet – 220 mm • Collection bag diameter – 2 x Ø500 mm • Capacity – approx. 5000 m3/h • 2 filter bags (dimensions: 500 x 1200 mm) • Equipped with casters for easy movement • Overall dimensions: 146 x 56 x 285 cm (L x W x H) Additional information: • Good original technical and visual condition • The photos presented show the actual condition of the item for sale • Possibility to run and inspect the machine on site • The listed price does not include VAT or transport costs Financing and transport: • We handle transport with our MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan

Condition: excellent (used), Buderus G 605 low temperature boiler 1020 kW Fjdpfowynuiex Afkoph

Year of construction: 2024, condition: new, Selling a WLO 20 KW Hot air stove ,wood stove,Heating Fjdpfx Afeixun Tokoph Technical parameters of the furnace Nominal heating output: 20.00 kW maximum heating output: 23.00 kW / approx. 230 m2 in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible fireplace made of 5mm thick boiler plate large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Furnace lining: 12 firebricks replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm Top Loading Port Dimensions: Width: 285mm x Height: 195mm Lower Loading Port Dimensions: Width: 285mm x Height: 265mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 120mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 300mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1380 rpm Air flow: 2910 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Technical data of the furnace nominal heat output: 30,00 kW maximum heat output: 35,00 kW / approx. 400 m2 complete with: axial fan with speed: 1380 rpm and capacity: 4650 m3/h complete with: blower control unit SCL-1515 Fpodpopm Ex Hefx Afkoh innovative design of the air jacket that completely surrounds the combustion chamber for maximum efficiency indestructible firebox, made entirely of certified boiler plate p265gh and 16M06 #6mm thick Large flue that reduces fuel consumption by up to 30%. Energy efficiency class: A energy efficiency index: 110 net weight: 260 kg gross weight: 290 kg Grille: 1000 x 250 mm coating with certified heat-resistant paint, which protects against corrosion and gives an aesthetic appearance solid construction powerful combustion chamber 100 x 55cm! large loading door instruction manual efficiency: 72,00% CO emission at 13% O2: 1.20m Fuel type: recommended seasoned hardwood with moisture content ≤20%* mg/Nm3, briquettes, coal only up to 10%. Dimensions: External dimensions: overall width: 650mm x overall depth: 1350mm x overall height: 920mm. dimensions of the fireplace: width: 550mm x length: 1000mm x height: 450mm Dimensions of the upper door (3 and 4 mm sheet metal): Width: 410mm x Height: 340mm Dimensions of the lower door (3 and 4 mm sheet metal): Width: 410 mm x Height: 150mm Dimensions of the upper loading opening: width: 320mm x height: 320mm Dimensions of the lower opening: width: 320 mm x height: 130 mm dimensions of the grille: width: 250mm x depth: 1000mm Diameter of the hot air outlet: Ø 150mm diameter of the exhaust outlet: Ø 150mm Height of the feet: 140 mm

Year of construction: 2024, condition: used, We are selling our workshop heater, which we have been using for about 1.5 years. The oven comes with a chimney pipe, as well as approximately 20 meters of ducting for warm air distribution. The unit is in good condition. Please note: collection and disassembly by the buyer only. If interested, please get in touch — we look forward to hearing from you! Technical specifications for the heater are as follows: — Nominal heat output: 30.00 kW — Maximum heat output: 35.00 kW / approx. 400 m² — Supplied with axial fan: Speed 1380 rpm, air flow: 4650 m³/h — Supplied with SCL-1515 fan control unit — Innovative air jacket design completely surrounding the combustion chamber for maximum efficiency — Durable combustion chamber, made entirely of certified boiler plate steel (16M06 #6mm thick) — Large flue which reduces fuel consumption by up to 30% — Energy efficiency class: A — Energy efficiency index: 110 — Net weight: 260 kg — Gross weight: 290 kg — Grate: 1000 x 250 mm — Coated with certified heat-resistant paint for corrosion protection and attractive appearance — Solid construction — High-performance combustion chamber (100 x 55 cm) — Large loading door — User manual included — Efficiency: 72.00% — CO emission at 13% O₂: 1.20 m — Recommended fuel: seasoned hardwood with moisture content ≤20%* mg/Nm³, briquettes, coal (up to 10%) Dimensions: — External dimensions (W x D x H): 650 mm x 1350 mm x 920 mm — Firebox dimensions (W x L x H): 550 mm x 1000 mm x 450 mm — Upper door (3 and 4 mm steel plate): 410 mm x 340 mm — Lower door (3 and 4 mm steel plate): 410 mm x 150 mm — Upper loading aperture: 320 mm x 320 mm — Lower opening: 320 mm x 130 mm — Grate: Width 250 mm x Depth 1000 mm — Hot air outlet diameter: Ø 150 mm Fpjdpfx Afjxgf Scekeh — Flue gas outlet diameter: Ø 150 mm — Leg height: 140 mm

Condition: used, Year of construction: 2018, operating hours: 22,700 h, functionality: limited functionality, power: 15 kW (20.39 HP), We are selling a 15 kW ABB electric motor, model M3BP 160MLB 2. The motor was running flawlessly until removal and has approximately 22,700 operating hours. Sold without warranty or return. Inspection or shipping from factory possible. Weight approx. 80 kg without packaging! Shaft diameter approx. 42 mm, length approx. 104 mm, and keyway approx. 12.5 mm wide. Fpedpfx Aov U Ntkjfksh

Condition: new, Laser performance: 2working width: 1500precision +/-: 0,05load-up weight (max.): 1.250messurements (LxWxH): 11200 x 3500 x 2560weight approx.: 10000at aluminium max. approx.: 4at stainless steel max. approx.: 5at carbon steel max. approx.: 14FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  Fsdertwqpopfx Afkjph - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: new, Laser performance: 2Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   Fpedpfx Aforuwbxoksh - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 2precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system Fpedpjruwb Hofx Afksh - Dual camera