Used Ifm Bus System for sale (41,790)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Nlodpfx Acezy Ndco Asg Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Nedpsz E A Icsfx Ac Aelg Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 Nledpfx Aceyzh Uls Asg - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,140 h, functionality: fully functional, machine/vehicle number: 111214, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, overall weight: 7,800 kg, TECHNICAL DETAILS Travel range X-axis: 1,100 mm Nlodpfx Aoz Apdzsc Ajg Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of positions in tool changer: 30 Table dimensions: 1250 x 610 mm MACHINE DETAILS Control system: Heidenhain 530 Operating hours: 16,140 h Machine weight: approx. 7,800 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04111010, We offer this very good Albo System AB AS1000 pile turner, year of construction 2005. Manufacturer: Albo System AB Model: AS1000 Construction year: 2005 Condition: very good Category ID: 672 Nedpfozu R Tnjx Ac Aelg Type: Pile turner If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Nlsdpfxsz Apc Rs Ac Asg Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: good (used), Year of construction: 2020, functionality: limited functionality, machine/vehicle number: ADL 2200/6, total height: 2,200 mm, Insulated glass production line and refrigerator with pumps for water purification a) ADL 2200/6 insulated glass production line b) BM7 butilex applicator, 7 kg c) TMPB 200 two-component extruder d) F-200 refrigerator Njdpfx Acezgu Rhs Aslg e) PKM strip cutting machine f) SM 25 strip filling machine g) R.T.M. rotary table h) Water purifier

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Nedpfx Acozkucfs Aolg Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Nodpfjyzc Ruox Ac Aslg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Nlodpfezqc U Nex Ac Ajg Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Year of construction: 2008, condition: used, functionality: fully functional, MSP 4550 NGI Sample Recovery System Available and ready for immediate dispatch. Nlodpfoznwrdsx Ac Ajg

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: Nsdpfxozzz Eus Ac Aolg * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Nlsdpfx Aoz Ay Rrsc Aog Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: Nledpfx Aezw Apgjc Aog We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) Nsdpfxsyc H I Sj Ac Aelg • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Year of construction: 2021, condition: new, Soco Case Sealer, Model T10 Standard Product Specifications • Capacity 30 units/min • Galvanised steel body construction • 50mm high grip side drive belts • Tape width range 32mm 55mm Nlodpfxsgq Nx Uj Ac Aeg • Top & Bottom tape heads • Manual side drive adjustments • Manual height adjustments • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box We supply a full range of Soco Equipment and spare parts

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Nljdsy Tlc Depfx Ac Aeg Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Njdpfx Acjya H S Sj Aelg Flying shear for continuous card cutting Reel to reel lamination option

Condition: used, Year of construction: 2024, Integrated SIAD Industrial Hydrogen Compression System (249 kW) - Manufacturer: SIAD Macchine Impianti (compressor), SAEP & FLOVEX (exchangers), Capelli & Cie (vessels). - Type: Turnkey reciprocating hydrogen compressor skid designed for ATEX Zone 2 hazardous areas. - Applications: Hydrogen gas (H2) boosting for chemical processing, mobility, and energy storage. Technical Specifications - SIAD HMS4-2 Compressor (2024): 249 kW | 384 kg/h | 0.1 to 3.5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP Gas Exchanger R-36050 (2024): 248 L volume | 10 bar(g) | -20 to +200 °C. - FLOVEX Oil Cooler (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli Main Buffer Vessel (2024): 10,250 L | P265GH Carbon Steel | -1 to +0.5 bar(g) | 2,310 kg. - Capelli Condensate Tank (2024): 1,140 L | 316L Stainless Steel (X2CrNiMo17-12-2) | 730 kg. Working Principle & Highlights Low-pressure hydrogen (0.1 bar) is boosted to 3.5 bar(g) at 384 kg/h by the 249 kW SIAD unit. Thermal management is handled by FLOVEX and SAEP exchangers, while the 10,250 L Capelli tank absorbs system pressure surges. Nodpfx Acjztw Upj Aslg - ATEX Compliant: Certified for hazardous Zone 2 gas group IIC environments. - Robust Metallurgy: Built with P265GH steel and 316L stainless steel for H2 service durability. - Modular Skid: Plug-and-play setup combining compression, cooling, and buffer storage.

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Automatic Loading and Unloading Systems Temperature and Humidity Control Drive System Njdpszbk R Iofx Ac Aslg Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V04PL0099, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Nljdpfx Acoyy A Hgs Aeg Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker VFX high-performance feeder with vacuum feeder Nlsdpfx Acezzp Scs Aog CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Nedpfx Aoz Dn Huec Aslg Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: excellent (used), functionality: fully functional, Harp racks for glass transportation 60 loading slots Nledpfxezty Rms Ac Asg Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file 4 units in stock In very good and clean condition As is Available immediately

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Nodpezyc Disfx Ac Ajlg Details available upon request.