Used Haas Umv750 for sale (386)

Condition: excellent (used), Year of construction: 2017, Haas ST 15 Year of manufacture: 2017 Laedpfez I Rylox Abyjh RPM: 3500 Tool setter Tailstock Chip conveyor Video available!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Year 2008 Control Haas Chuck 10” Ledpowbd Hqsfx Abyoah Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Lajdoz Ihc Rspfx Abysh Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Video available!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS Laedszt Nlmjpfx Abyjh STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, total height: 2,000 mm, controller manufacturer: HAAS, number of axes: 2, This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Turning diameter over bed: 762 mm • Tool turret vdi: 12 tool positions • Turning length: 860 mm Extra Information Machine still under power Lasdpfsyar Thex Abysh Dimensions Machine Depth 3300 mm

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, Equipment: chip conveyor, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Machine Description HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm Laedpfx Ajza Ucrobyjh * Maximum pallet load: 400 kg * Spindle speed: 12000 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 70 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos * Machine loading included in the price

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM Ledpfx Aoz Ehxyobyjah MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: excellent (used), Year of construction: 2019, HAAS ST-15 cnc lathe Year: 2019 Chuck Size 210 mm Max Part Swing 419 mm Max Cutting Diameter (with BOT turret) 305 mm Max Cutting Length (varies with workholding) 406 mm Bar Capacity 64 mm Travels specifications Travels X Axis 200 mm Z Axis 406 m Rapids on X 30.5 m/min Rapids on Z 30.5 m/min Spindle Nose A2-6 Max Rating 15 kW Max Speed 4000 rpm Max Torque 203.0 Nm 500 rpm Spindle Bore ø 88.9 mm Tailstock taper MT3 Hydraulic Quill Travel 95 mm Manual Body Positioning 508 mm Weight 3600 kg Ledpjz Tlafefx Abyjah Accessories/options: - Renishaw tool measuring arm - Foot pedals - Tool holders - Spare parts Under power test is available at anytime!

Condition: like new (used), Year of construction: 2023, operating hours: 3,363 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 257 mm, total length: 333 mm, total width: 233 mm, table width: 495 mm, table length: 1,320 mm, table load: 794 kg, rotational speed (min.): 12,000 rpm, overall weight: 6,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,402 h, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Purchase both machines together for €125,000. Excellent opportunity to acquire a complete Haas machining package. • Haas VF-4SS • Taper CAT40 • Spindle: 12,000 rpm Inline Direct Drive • TSC (Tool Side Center) • Renishaw WIPS (Wireless Inspection Probe System) • High-Speed Machining • Mist Condenser • Chip Conveyor Lodeztm N Nopfx Abyeah • 30 ATC (Automatic Tool Changer) • Cutting Hours: 2,402 hours • Cycle Hours: 3,363 hours • First owner (company) • Complete service history • Maintenance performed by authorized service provider Teximp d.o.o. • No crashes or major repairs • + Approximately 15 tool holders • Company-owned machine, located in Croatia • Immediately available • Operational and available for inspection • Ready for immediate production

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC Ledpezc Ni Sjfx Abyoah • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope Lsdpszwxz Ejfx Abyjah X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Laedpfjydil Nex Abyoh Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: like new (used), Year of construction: 2024, operating hours: 660 h, functionality: fully functional, overall weight: 8,255 kg, HAAS VF-6SS Vertical Machining Center – 2024 2024 HAAS VF-6SS Vertical Machining Center in excellent condition, purchased new in 2024 and with very low operating hours. Laedpfx Abszrhrcjyjh The machine has been used only for a specific production project and remains in outstanding mechanical and cosmetic condition. Equipment HAAS HRT310 Rotary Table (4th Axis) HTS9 Tailstock WIPS – Wireless Intuitive Probing System Through Spindle Coolant (21 bar) Through Tool Air Blast (TAB) High Speed Machining (HSM) 12,000 rpm Direct Drive Spindle 22.4 kW Spindle Motor Haas Next Generation Control Ethernet & USB Automatic Lubrication The machine can be inspected under power in Portugal. Immediately available.

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm Ledpfx Aboz R Alteyeah X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Laodpszz Ndrefx Abyjh Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen Lasdpfsy Tp E Asx Abyeh - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 Laedeym N Ehjpfx Abyjh We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Please contact me via email or WhatsApp for more information.

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Lsdpfs Acmlysx Abysah Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: excellent (used), Year of construction: 2008, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2008 Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Lajdpfx As Adq Nljbyeh Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), The Haas TRT 210, after servicing, is in fully operational condition. The milling machine it was used on has only 1300 hours of operation. The redesigned tilting rotary table, TRT210, not only makes 5-axis capabilities accessible to the average workshop but its new, smaller size also provides greater mounting flexibility compared to its predecessor. We completely redesigned the TRT210 model to create a much more compact and versatile 5-axis solution for mid-size milling machines. The new unit easily fits on one end of the machine table, leaving the remaining area free for additional fixtures or vises. Lajdpfs Aa Ag Isx Abyoh Note: Requires a Haas milling machine with 4th and 5th axis drives and NGC software version 100.21.000.1130 or later for full 4th and 5th axis support. Add 4- and 5-axis capabilities to your machine Compact size easily fits in mid-size milling machines Alternative plates available: zero point, A1-6, T-slot Easy plug-and-play connection to Haas machines Industry-leading performance and capabilities

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. Lsdpfxezrhine Abysah The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Condition: like new (used), Year of construction: 2023, Haas TM2-P Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 WIPS Lodpfozua Hwex Abysah HSM 4th axis connection Very few operating hours Like new!

Condition: excellent (used), Year of construction: 2014, mega Design Solutions UK LTD Use and recommend Haas machines. HAAS TM3P 3AXIS MACHINING CENTER LARGE CAPACITY Outstanding condition very little used complete with 8 BT40 tools as shown Laedpfsyhhgmsx Abyoh Good tooling package Travels X 1016MM Y 508MM Z 406 MM We can help with setup and training if required.

Condition: used, Year of construction: 2010, functionality: fully functional, grinding spindle speed: 8,000 rpm, grinding spindle motor power: 12 W, Machine in functional condition and can be under power and tested. Lajdpez Ea Hpsfx Abyoh

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm Ledpfxez N Sple Abyjah X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1