Used Engel Engel Viper 20 (2015) 2360 Mm for sale (87,459)

Condition: new, machine/vehicle number: 1f4581c873ed977cb9602039b, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins Dedpfx Aji Rixksfksuu Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, 2-stage support jacks, single-sided operation with anti-splash flaps according to EC Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long, for hose pipes 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right on the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear on the right outside on the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation 3x brakes Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating Instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-crossmember-load-transfer areas")! Country of Approval/Signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-line license plate holder Warning sign according to ECE - 70 Acceptance according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III / Registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 650 t Screw diameter: 80 mm Distance between tie bars V: 1440 mm Dodoza Au Njpfx Afksuu Distance between tie bars H: 1510 mm Opening min max: 450-950 Shot volume: 1810 cm3 Type: Horizontal Drive: Hydraulic

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox Duodpoy D I Hyefx Afksu -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 1 h, Equipment: hydraulics, For sale is a professional bema 20 sweeping machine in absolutely top condition. The machine was purchased from the renowned specialist dealer MAUCH. Ideal for year-round use in commercial, municipal, or agricultural settings. Technical specifications: Model/Type: bema 20 / bema 20 Dual Working width: 1550 mm Sweeping roller: 520 mm with stepless sweeping roller adjustment (spindle adjustment standard in the Dual version) Bristle pattern: High-quality mixed bristle pattern (ST, SW, 3R, SB) – perfect for dirt and light snow removal. Mounting/Attachment: WEIDEMANN ZBH EF & forklift attachment (part no. 34490861) – making it extremely versatile for use on farm loaders or forklifts! Drive: Powerful, hydraulic gerotor motor (heavy-duty series, drive shaft 32 mm). Leveling: Integrated 3D roller leveling system for optimal ground adaptation and perfect sweeping results. Duodpfx Aozbuqfjfksu Accessories: Includes loose hydraulic components and original bema accessories. Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Inspection possible in Weissenbach 153, 8967 Haus im Ennstal by appointment. Legal & Sales Conditions: The sale is made on behalf of Fischer Bau GmbH. Price: The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Exclusion of liability: This offer is exclusively aimed at business customers (B2B). The sale is made with complete exclusion of any warranty, guarantee, and liability for defects. A sale to private individuals (B2C) is excluded.

Condition: used, These stacking racks can be used as mobile warehouse racks. Duodpfx Afjx Ahu Sokeu Available in various versions, but above all, flexible in height. The loading platform is designed for all standard pallet sizes, bulky or difficult-to-palletize goods. You can determine the height of the stacking racks yourself by choosing from the stanchion

Condition: used, Electric Forklift Truck JUNGHEINRICH type EFG 216 Serial no.: FN413671 Year of manufacture: 2011 Load capacity: 1600 kg Lifting height: 4800 mm Fork length: 1220 mm Fork carriage width: 980 mm Overall height: 2120 mm Operating voltage: 48 volts - Triplex mast with full free lift 1550 mm - Hydraulic side shift - 2 driving speeds - Battery from 2015, type 06 EPZS C750 SC (48 volts, 750 Ah) - Automatic charger, 48 volts Dusdpfx Aoinwzhofkju - 3-wheel solid rubber tyres, front 18 x 7-8, rear 140/55-9 - According to hour meter: 14,725 operating hours - Power steering - Front working lights - New TÜV UVV inspection (surcharge EUR 150 net) Length without forks: 2000 mm Total width: 1080 mm Own weight without battery: 2390 kg Own weight with battery: 3480 kg

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available Dedey Uffhopfx Afkjuu The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: good (used), Clamping head, dead-collet chuck, collet sleeves, collet, tool holder, milling chuck, milling tool, clamping sleeves -Clamping sleeves: 17 pieces Dsdpowc R Dfjfx Afkjuu -Diameter: Ø 6 - 20 mm, see photos -Price/Delivery: complete -Transport dimensions: 230/120/H60 mm -Weight: 2.5 kg

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 85 mm, 79 pieces -Sizes: Ø 1 - 20 mm, see photos -Price/Sale: complete Dusdevv Uy Sopfx Afkeu -Dimensions: 310/200/H150 mm -Weight: 13 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm Duedpfx Aow U Aq Hsfksu -Dimensions total: 84/63/H38 mm -Total weight: 1.1 kg

Condition: good (used), Countersink, countersink, deburring countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° -Manufacturer: Bilz -Sale: only complete set -Weight: 5 kg Duodpfx Aeb A Rccofkeu

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Dusdpfxjv Htnie Afkou Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm Dodjyv Aptjpfx Afkeuu -Weight: 732 kg

Condition: excellent (used), Year of construction: 2014, For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Dsdpfx Afsiw Dt Doksuu

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz Dsdpfjd Hxx Ajx Afkouu - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Dedpfx Aoiv H Ekjfkeuu Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, overall weight: 11,000 kg, total length: 18,800 mm, total width: 4,310 mm, load capacity: 20,000 kg, main lifting speed: 4 mm/min, working height: 8,000 mm, Equipment: documentation/manual, Overhead Crane Konecranes – Type: double girder – Capacity: 20,000 kg – Lifting height: 8 m – Year of manufacture: 2006 – Type of hoist: wire rope hoist Dusdpfx Aeyrr D Dsfkeu – Manufacturer: Konecranes Dimensions – Span: 18,800 mm center-to-center – Installation height: 840 mm – Total width: 4,310 mm – Wheelbase: 3,800 mm – Suitable for crane rail: A65 / 60×40 / 60×30 – Own weight: approx. 11,000 kg Speeds – Hoisting: up to 4 m/min (stepless) – Trolley travel: up to 20 m/min (stepless) – Crane travel: up to 32 m/min (stepless) Features – Control: radio remote control – Crane documentation present: yes – Electrical schematics available: yes – Condition: in good condition. – Disassembled: yes, immediately available Optional – Crane power supply – Transport to your location (unloaded or unloaded with truck-mounted crane) – Crane modification by NEN-EN 1090 certified structural engineering company

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar Dujdpfxsx Tqnrj Afkou -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Dodpfx Afsiivc Dokjuu Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: used, These used stacking racks can be used as mobile storage racks. Available in various versions, but above all flexible in height. The loading floor is designed for all standard pallet sizes, voluminous or goods that are difficult to palletise. Djdpfex Ahu Ejx Afkouu You can determine the height of the stacking racks yourself by making a

Condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Stahl Süssen, Sheet metal clamp: Lifting clamp type SGK -Clamping range: 0-20 mm -Load capacity: 1000 kg -Dimensions: 190/75/H285 mm Duedpfx Afovgv Apjkeu -Weight: 6.9 kg

Condition: used, Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, linear guide rail -Guide rail: Linear guide rail, 2 pieces -Rail length: 1450 mm -Rail width: 20 mm -Dimensions: in the pictures -Delivery/Price: complete Djdouu U U Aepfx Afkeuu -Transport dimensions: 1450/40/H18 mm -Weight: 7.3 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Front face driver: Mount: MK4 -Front dimension: Ø 20 mm Dodeuwgf Hopfx Afkouu -Dimensions: Ø 42 x 203 mm -Weight: 1.0 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Number: 3x steel cable available -Price: per piece -Transport dimensions: Ø 440 x 110 mm / Ø 430 x 95 mm Duedjxbx R Iepfx Afkju -Weight: 10.7 kg / 11 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Djdpfxoq Rg U Ej Afkouu -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg