Used Elges Joint Bearing for sale (3,961)

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T100 CNR4 Year of manufacture: 2002 Nominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute: 22 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.195 s Safety distance: 312 mm Energy: 8493 KJ Adjustable stroke min./max.: 10–130 mm Ram adjustment: 100 mm P.M.I high adjustment: 370 mm Maximum extraction stroke: 55 mm Worktable surface: 950x660x68 mm Ram plate dimensions: 540x450 mm Shank diameter: 60 mm Projection from center: 330 mm Max. die size: 540x450 mm Upper die weight: 180 kg Voltage: 400 V Hydraulic overload Complete with user manual and CE declaration of conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor • Flywheel bearings • Rotary joint bearings • Countershaft bearings • Clutch plates • Clutch pins and flanges • Clutch seals • Hydraulic overload seal • Hydraulic overload hose • Oil pump guide pressure gauge • Oil pump guide float • Hydraulic overload pump • Air pressure switch • Front and side safety guards with safety interlock keys Nledpfsy D R N Rjx Ac Ajg • Worktable surface reconditioned on CNC machine • Foot pedal control • Electrical panel with remote assistance

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Njdswhdnhepfx Ac Aolg Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early fire service G-Class from second ownership, which has never been used for civilian purposes. TÜV and H-certification (according to §23 StVZO) passed in September 2025. Roadworthiness inspection (HU) valid until 09/2027 ("no defects found", approved by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Original mileage only 29,800 km. Used exclusively for fire service duty to date. Rapid Intervention Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA capacity. German garage-kept vehicle, equipped with the original registration document (only 2 previous owners), continuously registered until autumn 2025. Manufacturer stated in the original papers as GFG "Geländefahrzeug-Gesellschaft", then a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles produced under this manufacturer designation; shortly afterwards, "Daimler-Benz" was listed as the vehicle manufacturer in the registration papers. In 1991, a complete MATTER roll cage was installed in the vehicle (properly recorded in the documents). Includes a small roof rack system for transporting long equipment items. The long 280 GE is the largest and most powerful model of the first G-Class series that could be ordered ex-factory as a Mercedes G-Class in the early years. The M110 inline six-cylinder petrol engine with 2,717 cc and 115 kW / 156 hp starts and runs well. 4-speed manual transmission with differential locks. Power steering. Maximum speed registered at 155 km/h. A power take-off is installed for operating the generator. The last primary use was transporting a portable pump (TS) along with suction hoses and accessories. Therefore, there are no rear seats and a cargo area similar to a truck. Unfortunately, no additional seats remain apart from the 2 front seats. According to the original documents, this is a "3-seater" and the vehicle registration type is listed as "Other special-purpose vehicle, fire service rapid intervention vehicle (VRW)." Unladen weight is specified as 2,360 kg. Permissible total weight (originally 2,900 kg) was increased in 1991 to 3,030 kg as per the records. Nodpfx Aexthdzsc Aolg Therefore, this 280 GE currently has a payload capacity of 670 kg. Overall vehicle dimensions: Length 4,395 mm / Width 1,700 mm / Height 2,150 mm. Tires: 205/80R16, in good condition. Fitted with winter tires bearing the snowflake symbol in accordance with current legal requirements (DOT 2018). The G does not have a tow hitch, but it is equipped with the necessary mounting bracket. Retrofitting/towing capacity information cannot be supplied, as the relevant fields for towing capacity in the original registration document are marked as "not applicable." According to oral information from the last owner, the Mercedes is accident-free; however, this cannot be documented in writing and is therefore passed on to the buyer as an oral statement only. The 280 GE was driven a considerable distance on the motorway to us and completed the journey without any issues. A new battery has just been installed. The off-road vehicle is immediately available and ready for new tasks. This offer is only valid for commercial customers, freelancers, public authorities, emergency services, agriculture, forestry, and similar self-employed professionals. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors excepted.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): Njdpfx Acsq Dzi Ts Ajlg 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. Nedpfxsx S Hmzo Ac Aelg - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09075101981004, input voltage: 380 V, type of input current: three-phase, total length: 28,000 mm, year of last overhaul: 2024, control voltage: 380 V, workpiece height (max.): 160 mm, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided. Njdez Armlopfx Ac Aolg

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Nlsdex Ura Sjpfx Ac Aog Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Nodpszz Ranjfx Ac Ajlg Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Weight: 160kg. CE marked.

Condition: reconditioned (used), Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Nlodpfx Acsw T Un Uj Aeg Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. Nlsdpfx Aodqy Uqoc Aog The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Nljdpfx Aoytx Ursc Ajg Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: Njdpfx Ajxnqyhsc Aelg - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, functionality: fully functional, FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Njdpfx Acew Iy Nyj Aelg Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: used, Sauter Type RS semi-automatic finger-jointing machine for joining timber workpieces using finger joints. The machine is suitable for processing offcuts and for producing extended solid timber slats. Consisting of: Nsdpfx Acsz D Dw Ae Aslg Sauter Type RS-FPEL 130 milling and gluing machine Sauter Type RS-DKPV 6 press Sauter DAS 500 cross-cut saw Technical data: - Milling height: 130 mm - Max. finished length: 3,000 mm - Workpiece width: 45–95 mm - Milling motor: 15 kW

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t Nedpfx Acjf Tdwcs Aslg

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Nsdpszvu Ekjfx Ac Aolg Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: ready for operation (used), Compact Dovetail Jointing Machine Output: approx. 4-6 joints/min. For wood profiles with the following dimensions: Thickness: 30-120 mm Nsdpfszmmr Rex Ac Aolg Width: 75-250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, designed for processing PUR glue. Spring-mounted with a safety cut-off system that immediately stops the milling and glue application feed in case of even the slightest load. All parts are chrome-plated. Electrical system with PLC Milling motor power: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed drive: 1.50 kW Outfeed drive: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 amps In the past, jöma has successfully delivered and commissioned 10 of these machines. We can supply all spare parts for the compact dovetail jointing machine. We, jöma, have been supplying and repairing Cook Bolinders machines for 30 years.

Condition: used, mileage: 297,679 km, power: 75 kW (101.97 HP), first registration: 08/1998, fuel type: diesel, overall weight: 2,700 kg, color: silver, gearing type: mechanical, emission class: euro3, number of seats: 8, Equipment: air conditioning, airbag, central locking, navigation system, power assisted steering, sliding door, 4205 VW T4 Caravelle TDI Year of manufacture: 8/1998, 102 hp, 2.5 liters, 297,700 km Purchase price: €14,800 Equipment: Bluetooth hands-free system, Bosch navigation system Front and rear armrests, Sliding windows, Leather steering wheel, Tinted windows, painted bumpers and mirror caps, 2 airbags 2-zone automatic climate control, roof-mounted air conditioning Mirrors and windows electrically adjustable Central locking with remote key, Cup holders, Power steering, Heated rear window with wiper, Complete service history Cylinder head gasket, complete timing belt kit, complete engine gasket kit, clutch kit with release bearing, shift bushings, glow plugs, suspension joints, transverse link, stabilizer bearing, Oil change service with oil filter, air filter, cabin filter, fuel filter, new rear heater core Total weight: 2700 kg, towing capacity: 2000 kg The vehicle is in excellent technical and optical condition. The vehicles for sale are inspected and repaired in our certified automotive workshop. Non-smoking vehicle We are happy to consider your requests and can carry out various retrofitting work in our workshop: Tow hitch from €800 6-month Auto Helle warranty according to the warranty certificate. Bank financing possible Nedpfxjzd A Nye Ac Aelg Subject to changes and errors.

Condition: like new (used), Year of construction: 2010, operating hours: 200 h, functionality: fully functional, Finger-jointing line, like new, only operated for 60 days. Nedpoyl Nuaefx Ac Aolg

Condition: good (used), Year of construction: 1986, functionality: fully functional, Line for finger jointing (microjoints). The inverters in the control cabinets have been replaced with new ones. Njdpfsynkzgjx Ac Aelg

Condition: used, Milling head FC-10KZ6: Milling spindle: 50 mm Motor: 18 kW Spindle speed: 6000 rpm Tool dimensions: 250/50 mm Dust extraction nozzle diameter: 150 mm Chipper: 300 mm x 8 mm Chipper motor: 6 kW - 3000 rpm Dust extraction nozzle diameter from chipper: 80 mm Working width of the table: 600 mm Board thickness: 20-50 mm Working height: 25 - 120 mm Length of glued board: 200 - 600 mm Table drive: electromechanical Feed rate: 3 - 30 m/min, steplessly controlled Glue applicator: special glue unit with comb Loading of glued boards: manual, onto a loading belt system Remaining operations: automatic Press FC-10PZ6/2: Width of glued board: 25 - 120 mm Thickness of glued board: 20 - 50 mm Length of finished board: 6000 +20 -50 mm Pressing: hydraulic Hydraulic cylinder: 100 mm Hydraulic unit: up to 100 bar Unit motor: 3 kW - 1500 rpm Cut-off saw: 400 mm Saw motor: 3.5 kW Set performance, depending on the material used: up to 4 cycles/min (up to 4 six-meter strips/min) Nljdpfx Acey Ud Uus Aog Dimensions: Length: 13600 mm Width: 3800 mm Height: 1850 mm

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE Nlodoxvniiopfx Ac Aog For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter Nledpfx Aeyug Rqjc Asg BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Nledpfx Acjxmaa Ij Ajg

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal Nedpjwclkyjfx Ac Aslg - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.