Used Edger for sale (89)

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm Dcodek Talpjpfx Ahgei - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm Dcsdpfx Ahsxuipbogsi - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Dcsdenygvrepfx Ahgoi Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: new, Year of construction: 2026, BOARD EDEGR ANGOMAC ideal for wet and dry wood passage from 600 mm to 1300 mm max depth of cut from 10 mm to 160 mm Dedpfed Tka Hox Ahgjci until no.4 mobile blades Simple or highly automated versions are available.

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Dcsdpfx Aheq U R Etjgji

Condition: excellent (used), Feeding table 6 m stepless saw spacing adjustment, variable feed speed, 2x long-body motors, each 3.5 kW. Maximum workpiece width: 700 mm Maximum cutting width: 460 mm Maximum cutting height: 140 mm Minimum workpiece width: 70 mm Dedoxz Umxepfx Ahgoci

Condition: excellent (used), Max material height 120 mm Max material width 700 mm Dsdpfoxciypsx Ahgsci 22 kW motor Two floating saws Hydraulic roller feed, steplessly adjustable

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 110 mm Dcodpepfarrjfx Ahgoi Max średnica piły: 350 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Culaga Króciec odciągowy: 200 mm Wyłącznik bezpieczeństwa Zasilanie: 380 V Moc silnika głównego: 25 kW Wymiary całkowite: Długość: 2400 mm Szerokość: 1500 mm Wysokość: 2100 mm

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Complete Sawmill with Carriage Bandsaw and Edger including conveyors 4 Headblock Log Carriage - 1200 mm Fully Hydraulic Bandsaw - 1+2 Edger Dodpey I A H Aofx Ahgoci

Condition: used, Edger saw with output conveyor Manufacturer: Larmet Year: 2014 Edge banding machine: Length: 193 cm Dcedpfsxyh U Hsx Ahgsi Width: 85 cm Height: 220 cm Motor power: 18.5 kW Board separating conveyor: Length: 615 cm Width: 68 cm Height: 190 cm Roll length: 40 cm Motor power: 1.5 kW

Condition: used, Edger Saw Dcjdpfev Ni Eiox Ahgji Weight: 3000 kg, Max cutting height: 800 mm, Max width: 600 mm, Minimal distance between saw blades 55/28, Max 4 sawblades, Sawing speed 0-50 m/min,

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Dsdjxa Akpjpfx Ahgjci

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding Djdpfxjrzakme Ahgjci - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Dcjdeucw Rbjpfx Ahgsi The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Dsdpfx Aoucw Dzjhgsci

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, One machine for all tasks: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes The EdgeRacer the Grinder effortlessly removes slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the bottom side, allowing the steel pins to knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. The degree of edge rounding can be set by adjusting the brush feed. Deburring and edge rounding of thin sheet metal and 3D workpieces Dedpfxowzybks Ahgoci Deburr thin sheets or parts with cut-outs. The abrasive brushes can be lowered below the transport level so that the entire workpiece edge is processed. The oxide disc allows oxide layers to be removed from both internal and external contours. Maximum working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Choose single-row processing to fully utilize the working width, either for wide panels or parallel loading. The brushes automatically change position to optimize tool wear. For narrower workpieces, select double-row processing to achieve double the throughput in just one pass.

Condition: used, Milling machine, like new Manufacturer: EDGE Dedpfxezi Idte Ahgjci Model: RW24U

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 02_01_08, Eurotech Way Automatic Glass Edge Coating Machine Professional automatic machine for glazing and lacquering the edges of glass sheets. Suitable for glass panes with thickness of 4–19 mm and allows precise application of enamel/glaze on edges of 10–200 mm width. Equipped with dosing and application roller system, automatic parameter setting, roller conveyor system, and recipe memory for settings. Perfect for batch production in the glass industry—ensures uniform, aesthetic, and repeatable edge finishing. The machine fully automates the process and significantly increases productivity. Low usage – only 25,206 cycles performed in total. Dimensions: 5864 x 2695 mm Power supply: 400V - 50 Hz Required power: 4 kW Weight: 4000 kg Interface in 3 languages: English, Italian, Polish Dcsdpfsxzfu Tjx Ahgji Operational machine, possible to test before collection. Ready for pick-up. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: good (used), Approx. 1,000 units of deep shelf rails / partition supports for 80cm deep shelving units, Bito – used: Prices per unit, ex warehouse: €1.50 (net), disassembled, packaged, and loaded! Minimum order quantity: 200 units Manufacturer: Bito Type: SV Year of manufacture: unknown Quantity: 1 pallet load Condition: good Dedpfxekhd Ufj Ahgeci Available: immediately Location: Frankenberg (Saxony) warehouse

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Dcodpsu Afi Iefx Ahgoi Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Condition: used, functionality: fully functional, Truxor Amphibious Vehicle Suction Excavator with pump and cutter, grab for removal of sludge, sediment, or aquatic vegetation. The Truxor DM 5045 is an amphibious tool carrier, specifically designed for operations in water bodies, wetlands, and shorelines. Engine: Kubota V1305, liquid-cooled, 4-cylinder, water-cooled turbo diesel. Emission standard: EURO 3 33kW/44.9 hp/3000 rpm. Coolant volume: approx. 8 l. Electrics: Generator 12 V, 40 amp, 45 Ah battery, work lighting. Fuel: 35 l tank, consumption min. approx. 3.8 l/h, average approx. 4.5 l/h. Hydraulic system: demand control with dynamic adjustment, max. 140 l/min. Tank capacity 19 l + system approx. 36 l. Control via joystick: vehicle movement, lifting, tilting, weight distribution. Cab: foldable canopy, adjustable driver's seat, instrument panel. Speed: 0-100 m/min (without attachments). Front lift: lifting capacity 250 kg. Quick-change attachment system, tilting function. Dcodpfx Aeyn Hpaohgoi Saltwater-resistant aluminum, hot-dip galvanized steel frame. Length: 4,700 mm, with lifting arm 5,000 mm. Width: 2,060 mm. Height max. 2.59 m, min. 1.9 m. Weight: 1,400 kg (vehicle only), additional weight for attachments. Truxor available ex stock Gladbeck without trailer.

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. Dedpfx Ajvv Nwxehgsci The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network.

Condition: new, Power that transcends tough terrains: Galen Group's dragline buckets effortlessly handle the heaviest loads with durability and engineering excellence! Please contact us for inquiries. Dodpfx Ahovzhb Tsgjci

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Dodpfx Aov Nhg Sohgjci Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel Dcodpfx Aezic Ruehgei 380 V / 220 V transformer included