Used Amos Baler Amos Opus 1200 for sale (5,184)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, For sale is a partially refurbished Presona baling press, with 50 t pressing force, 22 kW drive power, built in 2005 Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Fodozbxxaspfx Afkjgc Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Fgedozbxw Aspfx Afksc Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational Fgsdszbxwiepfx Afksc • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Używany mieszalnik lemieszowy Morton-Lodige ze stali kwasoodpornej. Wymiary komory wskazują, że to model FKM1200D. Pojemność komory mieszania 1200 l. Wymiary: długość 1750 mm x średnica 1000 mm. Mieszalnik posiada pojedyńczy wał z mieszadłami lemieszowymi i dwoma mieszadłami pół-lemieszowymi. Wykonanie ze stali ko. Napęd przez silnik elektryczny z reduktorem. Dolne otwory wysypowe, wyposażone w klapy sterowane pneumatycznie. Mieszalnik posiada miejsce na zamontowanie dwóch mieszadeł intensywnych (chopperów). Maszyna zamontowana na ramie ze stali węglowej. Fgjdpfxey Inr Dj Afkjc Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N

Condition: good (used), Equiptec 600-liter plastic material dryer. Fsdpfxol Sknxo Afkogc

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, Fork positioner Fsdpow Sp Dhefx Afksgc Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Technical condition: New Description: Brand-new fork positioner, frame width 1,200 mm, opening center/center 270 to 1,120 mm, brackets for standard forks, with sideshift valve.

Condition: good (used), Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm Fsdpfx Aeh Uuy Rofkegc -Weight: 1276 kg

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Machine number: 140409 Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. The press has a second discharge chute. Fgjdozbyf Ispfx Afkoc Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: used, mileage: 139,435 km, power: 100 kW (135.96 HP), first registration: 03/1997, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 3, Equipment: crane, * Roofing crane Albert Böcker type AK 32/1200 * 32 meter lifting height * 1200 kg lifting capacity * Remote control * Working basket Fjdpfx Aewnk Emofksgc * Roof tile tongs

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Fgedpeu Ebk Hsfx Afkjc

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm max. workpiece diameter: 260 mm Power: 120 KW dimensions: 21,5 x 5 x 3,8 m mm weight: 90.000 kg pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 Fgedpfjvizuiex Afkoc *

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track Fgedpfsuhr S Dox Afkjc -Roller conveyor: with tilting function, without hydraulic unit -Speed: 14 m/min -Roller width: 1200 mm -Roller diameter: 110 mm -Axle spacing: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Overall dimensions: 3100/2300/H2000 mm -Weight: 1180 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 +Controller +TPU DEMO ROBOT as new DEVELOPMENT OF GSG ROBOTICS Fodpfexq Tu Tsx Afksgc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Fgodpfxevnwbco Afkoc Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infinitely variable with bra...

Condition: used, Year of construction: 1983, total width: 750 mm, total height: 900 mm, total length: 2,400 mm, Empty weight: 500 kg - Year: 1983 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 750mm x 900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Fgedpfxexalyyo Afkjc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 127-01204, functionality: fully functional, power: 7.8 kW (10.61 HP), spindle diameter: 40 mm, pivoting range: 45 °, table width: 450 mm, table length: 2,680 mm, TECHNICAL DETAILS Table length: 2,680 mm Table width: 450 mm Tilting spindle: Automatic Maximum spindle tilt: 45° Spindle diameter: 40 mm Minimum spindle speed: 3,000 rpm Spindle speed control: Stepped MACHINE DETAILS Main motor power: 7.8 kW Connection voltage: 400 V Connection current: 16 A Dimensions & Weight Transport dimensions (L x W x H): 2,680 x 1,200 x 2,200 mm Fgedoy Tniyspfx Afksc Transport weight: 950 kg Feeding device Manufacturer: Masterwood Model: Euromeo Number of wheels: 4 Number of speeds: 2 Guide manufacturer: Aigner

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Fgedeyntrhjpfx Afkec Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Control cabinet. Three rotary table polishing machines are available.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm × 65 cm Condition: very good! Fgedpfxjzaqyms Afkec Video of the machine in operation available upon request. Transportation is also possible.

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres Fodpfex Rk Dnsx Afksgc • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Fedpjy S Ru Ajfx Afkegc Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Fedpfsy S Rtlex Afkogc Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Fjdpfx Afey S Rqwekegc Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: new, Year of construction: 2026, functionality: fully functional, The Impuls Packaging Cobot is an intelligent automation system designed to move and position products efficiently and precisely. It handles the automatic picking, placement, and arrangement of products on pallets or within packaging units, ensuring a smooth and continuous production flow. Thanks to the integrated automation technology, various packing patterns and workflows can be stored directly in the system and recalled as needed. This enables the Cobot to be flexibly adapted to changing products and production requirements without any setup downtime. Fgedpfxeyv H T Ns Afkoc A range of gripper options is available for the Cobot, including vacuum grippers (either pneumatically operated or with an integrated vacuum motor) as well as specialized gripping systems for different applications. Together with our German partner in the Frankfurt region, we develop the optimal solution for your product to ensure precise, safe, and efficient handling. The system is operated via a user-friendly interface, allowing for easy setup and control without the need for programming skills. The Cobot’s compact design makes it easy to integrate into existing production lines while requiring very little floor space. Using our Cobot increases process reliability and reduces dependence on personnel bottlenecks due to illness or unfilled shifts, ensuring reliable and efficient production even with fluctuating staff availability. Typically, the Cobot pays for itself within the first year. System Features 1. 6-axis cobot robot for moving and placing products 2. Compact, space-saving design 3. Suitable for various pallet sizes 4. Multiple packing patterns can be stored and transferred to other systems 5. Easy operation with a graphical user interface, suitable for unskilled staff 6. Low energy consumption, minimal operating costs 7. Available with a variety of gripper options Technical Parameters 1. Maximum product dimensions: L1200mm, W1200mm, H500mm 2. Maximum product weight: approx. 20kg (depending on gripper weight) 3. Packaging speed: 6–10 palletizing cycles/minute (depending on product and pallet size; up to 32 packs/minute possible with multi-pick) 4. Maximum stacking height: 2000mm (600mm additional lift), arm reach up to 1680mm 5. Pneumatic connection required for operation 6. Connection voltage: 3Ph. 380V 50Hz, DC 24V connection 7. Overall power: approx. 3 kW 8. Machine weight: approx. 600 kg 9. Machine dimensions: approx. 3450x1500x3500mm 10. Noise level: > 60 dB We offer different safety concepts for the Cobot: Safety fence: Physically separates the working area so entry into the operation zone is prevented during operation. Safety sensors: Sensors monitor the working area and automatically stop the Cobot as soon as a person or object enters the danger zone. We are happy to advise you on which concept is best suited to your production. When ordering, you can select one of the systems; the other can be supplied for an extra charge.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 Fgjdpfx Ajy Tvwrofkec spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: used, mileage: 379,000 km, power: 184 kW (250.17 HP), first registration: 07/2015, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGL 12.250 4x2 refrigerated vehicle, Euro 6, automatic gearbox, Thermoking unit T 1200 R cooling down to -30, approx. 6700h, diesel/electricity, body dimensions: approx. 7.30m, Kress body, leaf-air suspension, local traffic house, collision warning system, double tank, cruise control, air conditioning, heated seats, auxiliary heating, reversing camera, differential lock, hill start assist, radio/CD/AUX, navigation system 1st hand Fgsdpfx Afsrir Iwskec