Used 6,40 Lfm. Kragarmregal Einseitig Langgutregal 255 Cm Hoch for sale (11,980)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Hedpjmhh Dtjfx Adwju 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Hodjz E N N Hspfx Adwsu Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Hsdpez E N R Refx Adwsu -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Hsdomhhx Ispfx Adwou - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Hodpfxsmhh Dho Adwsu - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth Hodpfxomhh Anj Adwsu 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Hjdpfemhhyasx Adwsu - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Hedpsmhh Dzefx Adwju Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible Hodpfjz Hb D Sex Adwsu PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright Hsdpfx Ajh R Taqedwou = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments Hjdpemidyfsfx Adwou - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Hsdpfxsmhhyps Adwju - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. Hsdpjfdkb Tsfx Adweu The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Hsdpfxofdkbho Adwju Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level. Hjdefdkb Uspfx Adwju

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Hsdpfxemhhl Hj Adwju Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: Hsdjz E U Etopfx Adweu - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany Hodpfx Adsguk Dkjwou - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 10.900,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Hodpoz Eqq Sjfx Adwju Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 7.65 linear meters wide-span shelving, 80 cm deep Hedpfx Adoz E N Rkewsu Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Shelving package includes: - 05 x frames, approx. 200 x 60 cm, disassembled - 32 x beams, approx. 185 cm - 16 x shelf panels, approx. 184.5 x 79.5 cm - 32 x support bars (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Chipboard, natural finish - Uprights blue - New goods, available from stock - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6/net each. Delivery available on request at competitive rates. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,001.00 net plus VAT as required by law. You will receive an invoice with VAT shown separately. Transport: Delivery is performed as requested by our partner shipping company; cost depends on postal code. Assembly: Our trained staff are at your disposal, providing professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Hsdoguk Dvjpfx Adweu Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: new, Year of construction: 2022, 11.45 m Long-Span Racking, 80 cm Deep – Workshop Shelving, Warehouse Racking, Wide Span Shelving, Manual Storage, Shelving Systems, Small Parts Storage Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 11.45 linear meters Rack offer includes: - 07 x frames, approx. 200 x 80 cm, disassembled - 36 x beams, approx. 185 cm - 18 x shelf panels, approx. 184.5 x 79.5 cm - 36 x load distribution bars/crossbars - Incl. safety pins Hjdpfx Adoz E N Ntsweu - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage levels - Shelves made from natural chipboard - Uprights in blue - Galvanized crossbars - New stock, available from warehouse - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,175.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Delivery: Delivery can be arranged by our partner freight forwarder on request. Cost depends on the delivery postcode. Assembly: Our trained personnel can assist you with professional assembly and disassembly of your equipment as required. Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning to ordering and installation.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. Hsdpfx Aoz E N Snedweu - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 250 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8690,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : Hedpfxez E Nv Tj Adwsu If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) Hedpfx Adjd Tqalewsu - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.