Second-hand machinery for sale (200,000)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 17,600 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power: 5,000 W Steel sheet thickness: max. 20 mm Stainless steel sheet thickness: max. 15 mm Aluminum sheet thickness: max. 10 mm Cutting speed: max. 60/85 m/min Accuracy: ± 0.1 mm Table dimensions: 3,000 × 1,500 × 115 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 9,300 x 4,600 x 2,000 mm Crjdpfxjz Hxu Uo Adhoh Total weight: 13,140 kg Operating hours Beam on: approx. 17,600 h Laser on: approx. 45,500 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 145 h, load capacity: 2,000 kg, lifting height: 3,805 mm, fork length: 1,000 mm, empty load weight: 3,589 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,805 mm Overall height: 2,460 mm Fork carriage: FEM 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Standard (2W380) Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 2,150 x 1,100 x 2,460 mm Total weight: 3,589 kg Battery voltage: 48 V Battery capacity: 690 Ah Battery year of manufacture: 2006 Charger: Three-phase, 48 V, 80 A (not tested) Front tires: Superelastic, 200/50-10 Rear tires: Superelastic, 18 × 7-8 Front tire condition: 70% Rear tire condition: 70% Operating hours: 145 h Csdpfx Adjz H Rvqsherh EQUIPMENT 3rd valve Impulse control Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,555 h, load capacity: 3,000 kg, lifting height: 3,300 mm, construction height: 2,270 mm, overall weight: 5,507 kg, Equipment: sideshift, TECHNICAL DETAILS Credpfxoz H Rhas Adhoh Load capacity: 3,000 kg Lifting height: 3,300 mm Overall height: 2,270 mm Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 500 Ah (Li-Ion, year of manufacture: 2021) Charger: 80 V - Li-Ion Weight: 5,507 kg Operating hours: 10,555 h EQUIPMENT 3rd valve 4th valve Rear work light Front work light Heater Full cabin Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fork length: 1,200 mm, TECHNICAL DETAILS Mast Lifting capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 900 mm Overall height: 3,340 mm Fork carriage: FEM 4 Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2S400) Drive: 4-cylinder diesel engine Fuel type: Diesel Engine manufacturer: Perkins Tires: Pneumatic tires Front tires: 8.25-15 Rear tires: 8.25-15 Front tire condition: 60% Rear tire condition: 60% Dimensions & Weight Dimensions (L x W x H): 4,450 x 2,000 x 3,340 mm Total weight: 8,150 kg Crjdpfx Adjz H Rypjhjh Operating hours: 5,125 h EQUIPMENT Full cabin Heater

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,933 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,500 mm, mast type: duplex, fork length: 1,150 mm, TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,100 mm Free lift: 1,500 mm Overall height: 2,050 mm Fork length: 1,150 mm Fork carriage: FEM 2A MACHINE DETAILS Mast: Duplex, 2F310 Drive: Electric Front tires: Superelastic, 18x7-8 Rear tires: Superelastic, 15x4.5-8 Condition of front tires: 70% Condition of rear tires: 10% Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2019 Charger: 48 V, not tested Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,070 x 2,050 mm Weight: 3,168 kg Operating hours: 10,933 h Credsz H Rutopfx Adheh EQUIPMENT 3rd valve Work light, front Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,543 h, load capacity: 4,000 kg, lifting height: 4,000 mm, fork length: 1,350 mm, empty load weight: 6,170 kg, TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 4,000 mm Overall height: 2,750 mm Fork length: 1,350 mm Fork carriage: FEM 3A MACHINE DETAILS Mast: Standard (2W400) Drive type: Internal combustion engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: GM Engine model: Vortec V6 Engine: 4-cylinder internal combustion engine Front tires: Superelastic 8.25 - 15 Front tire condition: 80% Rear tires: Superelastic 28 x 9 - 15 Rear tire condition: 80% Cjdoz H Rkzspfx Adherh Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,400 x 2,750 mm Weight: 6,170 kg Operating hours: 12,543 h EQUIPMENT 3rd valve 4th valve Front work lights Rear work lights Windshield Half cab Fork extension Push forks Side shifter

Condition: refurbished (used), Year of construction: 2005, laser type: CO₂ laser, laser power: 100 W, working length: 1,330 mm, working width: 1,630 mm, TECHNICAL DETAILS Working area (L × W): 1,330 × 1,630 mm Laser power: 100 W Laser source: CO₂ Crodpoz D E Ddjfx Adheh Maximum material width: 1,575 mm Material pass-through: 15–50 mm (without material support) Speed: 1 – 1,414 mm/s Maximum acceleration: 14.1 m/s² MACHINE DETAILS Suitable for: Films, acrylic, wood, and textiles Dimensions (L × W × H): 2,730 × 2,450 × 1,590 mm EQUIPMENT i-cut Production Console software package

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Credpfxez Ahybs Adhsh Travel in Z-axis: 640 mm Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Crjdpfjz Ahw Hex Adheh Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Cjdpfxsz Ahxqj Adhjrh Travel range Y: 410 mm Travel range Z: 410 mm Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots Crjdjz D H Drjpfx Adhjh 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: used, machine/vehicle number: 21'940, functionality: fully functional, pressing force: 175 t, stroke length: 400 mm, throat depth: 300 mm, distance table to ram: 965 mm, overall weight: 23,000 kg, working width: 4,100 mm, TECHNICAL DETAILS Pressing force: 175 t Working width: 4,100 mm Maximum stroke: 400 mm Distance from table to ram: max. 965 mm MACHINE DETAILS Control model: Cybelec ModEva 12S (retrofitted) Hydraulic oil capacity: approx. 230 l Machine dimensions (L x W x H): approx. 5,400 x 2,420 x 3,200 mm EQUIPMENT Codpjz Dw S Hjfx Adherh Accessories as shown in the pictures.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! Cjdpjz D H Hyjfx Adhsrh The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Condition: used, Year of construction: 2023, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! For sale is a complete digital printing setup, consisting of three components, which are as follows: - Aeoon Compact Series – Digital textile printer - Aeoon PTB – Pre-treatment unit - Sanco CB160T – Tunnel dryer TECHNICAL DETAILS Aeoon Compact Series – Digital textile printer Manufacturer: Aeoon Technologies GmbH Model: Compact Series Serial number: 20082560 AHP Year of manufacture: 2023 Weight: 1,900 kg Voltage: 3×400 VAC + N + PE Power consumption: 10.6 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Aeoon PTB – Pre-treatment unit Manufacturer: Aeoon Technologies GmbH Model: PTB (Pre-Treatment Unit) Serial number: 30082530 Year of manufacture: 2020 Weight: 250 kg Voltage: 1×220 V + N + PE Power consumption: 0.9 kVA Frequency: 50/60 Hz Country of manufacture: Austria Cjdpjz Duiiefx Adhorh Compliance: CE Sanco CB160T – Tunnel dryer Manufacturer: Sanco Technology Ltd Model / Machine Type: CB160T Serial number: CB160T-210-4-120-E-0358 Year of manufacture: June 2020 Weight: 3,000 kg Voltage: 3×400 V, 3-phase + N + PE Current consumption: 100 A Frequency: 50/60 Hz Operating principle: purely electric Country of manufacture: United Kingdom Compliance: CE

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Cjdpfx Adez Duvvohsrh Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Codpfxsz Dw Eme Adhsrh Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Codpfxjz A Ubie Adhorh Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: ready for operation (used), functionality: fully functional, turning length: 590 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Csdpfx Adjz Ahxkehorh Travel in X-axis: 221 mm Travel in Z-axis: 590 mm Swinging diameter: 300 mm Turning length: 590 mm Swinging diameter over bed: 425 mm Spindle speed: max. 4,500 rpm Spindle bore: 65 mm MACHINE DETAILS Control system: Fanuc

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) Credpfsz A Tx Tox Adhjh TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Crjdpfx Ajz Ahx Dsdheh Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Crjdpfx Ajz Dvfxsdheh Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Csdpfoz D Evaex Adhjrh Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: like new (used), Year of construction: 2023, operating hours: 16 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System Codpez E A Hxjfx Adhsrh The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Crsdez Imc Nspfx Adheh Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, cutting height (max.): 105 mm, cutting width (max.): 3,200 mm, total length: 4,500 mm, total width: 1,600 mm, total height: 1,800 mm, overall weight: 5,200 kg, Equipment: CE marking, saw blade guard, scorer, SCM Sigma Impact 105 C Beam Saw – 3200 × 3200 mm – 2003 Price: €19,500 + VAT – Ex Works, Ireland SCM Sigma Impact 105 C industrial beam saw / panel sizing saw. Year: 2003 Cutting capacity: 3200 × 3200 mm Blade projection: 105 mm Manufacturer: SCM Model: Sigma Impact 105 C Location: Ireland Condition: Used Availability: Immediately available The machine has been dismantled and is ready for loading and shipping. The SCM Sigma Impact 105 C is a heavy-duty industrial panel sizing saw designed for accurate, high-volume processing of sheet materials including MDF, MFC, chipboard and similar wood-based panels. Machine Specification 3200 mm cutting length 3200 mm rear loading/pusher capacity 105 mm blade projection Automatic programmable pusher Pneumatic workpiece grippers Main saw and scoring saw Pressure beam clamping Automatic cutting cycle Industrial SCM construction Condition & Sale The machine is used and is offered as seen, ex works Ireland. The machine is currently dismantled and prepared for transport. Inspection of the machine and components can be arranged by appointment. The buyer is responsible for collection, transport, installation and commissioning unless otherwise agreed prior to purchase. Assistance with loading and international transport can be arranged at additional cost. Crjdez Iykmspfx Adheh Payment in full prior to collection. Export The machine is immediately available for collection from Ireland. We can assist international buyers with: Loading arrangements European and UK transport quotations Installation and commissioning quotations if required Price: €19,500 + VAT, Ex Works Ireland Contact for further information, photographs, videos or transport enquiries. Search Keywords SCM Sigma 105, SCM Sigma Impact 105 C, SCM beam saw, used beam saw, used beamsaw, panel sizing saw, automatic panel saw, CNC panel saw, SCM panel saw, 3200 beam saw, 3200 x 3200 panel saw, Holzma alternative, Selco alternative, Gabbiani alternative, used woodworking machinery.