Membrane for ABEL HMD-G-50-0500

Membrane

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Bcjdpevhctwofx Aa Uow Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice. Bsdoiyqilepfx Aa Uecw

Condition: new, membrane for HMD-G-80-1000 ABEL pump Bcjdjizt Ryopfx Aa Usw NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: new, membrane for HMD-G-32-0250 ABEL pump Bcedpfsizt R Djx Aa Uow NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Bcedpjd S Efasfx Aa Uow width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran Bodpfx Aeff Agioa Ujcw MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C