Powered tools VDI 40

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included Njdpfeyuyluox Agwecp MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm Nodet Uw Avspfx Agwecp The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 3005, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,870 mm, table length: 3,756 mm, table width: 1,892 mm, Equipment: CE marking, TECHNICAL DETAILS Working area X-axis: 3,700 mm Working area Y-axis: 1,870 mm Table length: 3,756 mm Table width: 1,892 mm Tool clamping system: HSK-F63 Number of tool changer positions: 18 pcs. MACHINE DETAILS Drilling head: F20R Number of drilling spindles: 8 vertical, 12 horizontal System/Software: SCM Maestro Dimensions & Weight Dimensions (L x W x H): 6,100 mm x 2,600 mm x 2,450 mm Machine weight: 4,160 kg EQUIPMENT Worktable with 2 vacuum zones Nodpfx Ageyuyf Uewocp User manual FAST18 18-position tool changer (18/22XX) Electrical schematics CE marking CE certificate Drilling tools Bumper Vacuum pump (250/300 M3/H 50/60 Hz) OF0438 MAESTRO ACTIVE HUMAN-MACHINE INTERFACE SOFTWARE (HMI) OF0429 SCM DIGITAL SOLUTIONS: MAESTRO CONNECT 52.52.20 MAESTRO CONNECT; complete hardware preset for IoT platform 52.52.25 MAESTRO CONNECT; annual membership (validity unclear) OF0422 MAESTRO CNC programming software

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Ncsdoyuyfzopfx Agwop Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: good (used), Year of construction: 2012, arm reach: 2,696 mm, controller model: KR C4, KUKA Robots Model: KR 90 R2700 pro Technical data Maximum reach: 2696 mm Rated payload: 90 kg Rated supplementary load, rotating column / link arm / arm: 0 kg / 0 kg / 50 kg Rated total load: 140 kg Pose repeatability (ISO 9283): -/+ 0,06mm Number of axes: 6 Mounting position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1058 kg Axis data Motion range A1: -/+ 185 ° A2: -140 / -5 ° A3: -120 / 155 ° A4: -/+ 350 ° A5: -/+ 125 ° A6: -/+ 350 ° Speed with rated payload A1: 136 ° / s Nsdpfx Ajtpwxlsgwocp A2: 130 °/ s A3: 120 ° / s A4: 292 ° / s A5: 258 ° / s A6: 284 ° / s Operating conditions Ambient temperature during operation: 10 °C bis 55 °C (283 K bis 328 K) Controller: KR C4

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016 Nedpfx Aoyuya Esgwscp

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Ncjdpfx Aeyux Rijgwep Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw Nsdpfxoxwdwfj Agwocp including hydraulically foldable dresser including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Nsdpoyux I Usfx Agwscp Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Nsdpfsyux Egex Agwjcp Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm Ncsdpfxjxt Ur Sj Agwep height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Overall size 370x220x300 cm Total weight, approx. 15000 kg Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106015, saw blade diameter: 520 mm, overall weight: 500 kg, tilt adjustment saw blade: 45 °, cutting depth: 600 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 520 mm Maximum cutting depth: 600 mm Saw blade tilt max.: 45° (electrically adjustable) MACHINE DETAILS Njdpfx Ageyuxuzowscp Dimensions & weight Dimensions (L x W x H): 6,200 x 3,200 x 2,300 mm Machine weight: 500 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13350686, pressing force: 400 t, stroke length: 150 mm, power: 7.5 kW (10.20 HP), number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Pressing force: 400 t Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Number of cylinders: 10 Cylinder diameter: 120 mm Plate material: Aluminium (solid) Plate thickness top and bottom: 90 mm MACHINE DETAILS Power: 7.5 kW Voltage: 380 V Dimensions & Weight Transport dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Total weight: 25,000 kg EQUIPMENT Infeed and outfeed conveyor Oil heated Ncedpfoyuxh Ujx Agwsp Oil boiler

Condition: good (used), Year of construction: 2014, Table size 3500 x 820 mm, Traverses XYZ 3000 x 820 x 720 mm, Table load 2500 kgs, Spindle taper Din 40, Spindle speed 12000 rpm, spindle power 22Kw, 30 ATC, Nodsw Nwt Eepfx Agwecp Mazatrol Matrix Nexus control, through spindle coolant, swarf conveyor

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 4712, pressing force: 120 t, cylinder diameter: 90 mm, number of cylinders: 6, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Gluing machine Nedeyuxh Ijpfx Agwjcp Destacker High-frequency cabinet (offered separately)