Book binding machine

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: W4X133Y01284, Year of construction: 2021, operating hours: 5,829 h, load capacity: 1,200 kg, lifting height: 1,924 mm, construction height: 2,200 mm, fork length: 1,150 mm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lift height: 1,924 mm Overall height: 2,200 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Standard Drive type: Electric Dimensions & Weight Dimensions (L x W): 2,500 x 800 mm Weight: 1,500 kg Battery: 48 V, 375 Ah Operating hours: 5,829 h EQUIPMENT Former Linde full-service contract unit Initial lift – can carry 2 pallets at once / good ground clearance for uneven surfaces All measurements are approximate. No liability for typographical or measurement errors. Cjdeywix Rjpfx Acvora COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift, at your own risk. Collection ONLY with email confirming payment! Collection WITHOUT appointment Monday to Friday from 7:00 am to 4:30 pm. If the mast is too high for transport, it can be disassembled upon request. For delayed collection, a storage fee of €20 per machine per day applies (payment must be made before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386V11821, Year of construction: 2019, operating hours: 5,938 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, mast type: triplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,625 mm Fork length: 1,200 mm Free lift: 1,519 mm Design: Counterbalance forklift MACHINE DETAILS Mast type: Triplex Drive: Electric Battery: 48 V, 625 Ah, measured at 50.4 V (very good performance!) Operating hours: 5,938 h Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,121 mm Weight: 3,200 kg Csdpoywiviofx Acvera EQUIPMENT Ex-Linde full-service machine Service valid until 03/2027 UVV inspection valid until 03/2027 Facelift model with tilt angle display (practical for sensitive goods) Triplex mast with full free lift 3rd valve for sideshifter 4th auxiliary valve available for fork positioner LED working light front LED working light rear Safety light rear Safety light front Comfort seat with lumbar support and seat heating All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift, at buyer’s risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 a.m. – 4:30 p.m. A mast that is too tall can be dismantled for transport on request. If collection is not made on time, a storage fee of €20 per machine per day will be charged (the outstanding amount must be settled before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: W4X133Y01285, Year of construction: 2021, operating hours: 5,607 h, load capacity: 1,200 kg, lifting height: 1,924 mm, construction height: 2,200 mm, fork length: 1,150 mm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lift height: 1,924 mm Overall height: 2,200 mm Fork length: 1,150 mm MACHINE DETAILS Cedsywiulepfx Acvera Mast type: Standard Drive type: Electric Dimensions & Weight Dimensions (L x W): 2,500 x 800 mm Weight: 1,500 kg Battery: 48V 375Ah Operating hours: 5,607 h EQUIPMENT Former Linde full-service machine Initial lift – allows lifting of 2 pallets simultaneously / good ground clearance for uneven floors All measurements are approximate. No liability assumed for typographical or measurement errors. PICK-UP CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Pick-up ONLY with email confirming payment! Collection WITHOUT appointment Monday to Friday, 7:00 am – 4:30 pm. Mast may be removed for transport (on request) if it is too tall. If collection is not made within the agreed deadline, a storage fee of €20 per machine and day will be charged (must be paid before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X387V05841, Year of construction: 2019, operating hours: 7,735 h, load capacity: 3,000 kg, lifting height: 6,430 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,824 mm, DGUV certified until: 03/2027, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 6,430 mm Fork length: 1,400 mm Free lift: 1,500 mm Design: Counterbalance forklift MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery: 28/11/2019, 80V, 5PzS, 625Ah, measured at 83.2V (very good performance!) Operating hours: 7,735 h Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,200 x 2,824 mm Weight: 5,600 kg EQUIPMENT Ex Linde Full-Service unit Service valid until 03/2027 UVV safety inspection valid until 03/2027 Facelift model with tilt angle display (ideal for handling sensitive goods) Triplex mast with full free lift 3rd valve for side shifter 4th auxiliary valve free for fork positioner Half cabin with windscreen wiper Lateral fall protection (easily removable) LED work light front LED work light rear Rear safety light Comfort seat Note: Mast removal for transport can be optionally offered by the seller for €950 net. All dimensions are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with email payment confirmation! Credpfx Aceywiqyovja Pick-up WITHOUT prior appointment Monday to Friday, 7:00–16:30. If the mast is too tall for transport, dismantling can be arranged upon request. In case of late collection, a storage fee of €20 per machine per day will be charged (payment required before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 516353G00552, Year of construction: 2016, operating hours: 5,263 h, load capacity: 3,000 kg, lifting height: 6,640 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,900 mm, DGUV certified until: 03/2027, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 6,640 mm Fork length: 1,200 mm Free lift: 1,500 mm Cjdpfxsywin Ss Acvora Design: Counterbalance forklift MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery: 12/2021, 80V, 620Ah, measured at 85.4V Operating hours: 5,263 h Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 2,900 mm Weight: 5,600 kg EQUIPMENT Former Still full-service unit UVV certificate current, next due 03/2027 Service current, next due in 1,000 operating hours / 03.2027 Triplex mast with full free lift 3rd + 4th hydraulic valve; fork positioner with side shift Full cabin with radio, heater, and windshield wiper LED work light front LED work light rear Orange warning beacon Rear safety light Comfort seat with lumbar support and seat heating Note: Dismantling the mast can be optionally offered by the seller for €950 net. All measurements are rounded. No liability is assumed for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site at own risk. Collection ONLY with payment confirmation email! Collection WITHOUT appointment Monday to Friday 07:00-16:30. An oversized mast can be dismantled for transport on request. If not collected on time, a storage fee of €20 per machine per day will be charged (must be paid before pickup).

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table load: 500 kg, rotational speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 600 mm Spindle speed: 9,000 rpm Spindle taper: ISO 40 Codeyv A E Iopfx Acvjra Spindle drive: 7.5 kW Table size: 750 mm x 450 mm Spindle/table distance: 690 mm Table load: 500 kg MACHINE DETAILS Control: Heidenhain type 410 M mm Machine weight: approx. 3.2 t EQUIPMENT Electric handwheel

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Crjdeyv A Dkepfx Acvsa Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Cedpfx Acoyv A A Hsvora Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 6,000 rpm Spindle taper: ISO 40 Number of tool changer positions: 24 Crsdpfx Ajyv Axzjcvsa MACHINE DETAILS Total power requirement: 35 kW Dimensions & Weight Required space (L x W x H): approx. 3,600 x 3,000 x 2,925 mm Machine weight: approx. 5,200 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, overall weight: 7,300 kg, total height: 1,750 mm, total length: 10,000 mm, total width: 3,750 mm, working width: 3,800 mm, No reserve price – guaranteed sale to the highest bidder! The line can be used for the following applications: Tenoning Profile milling Window and external joinery Sliding windows & French doors Angled windows Solid cabinet doors Series production with high precision TECHNICAL DETAILS Working width: 3,800 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 10,000 x 3,750 x 1,750 mm Total weight: 7,300 kg Crjdpfx Acjyt Hn Tovsa EQUIPMENT Industrial heavy-duty construction Suitable for 68 mm and 90 mm profiling Operation possible by one person High repeat accuracy