Generator

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid commits you to collecting the item by July 27, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,600 mm Travel range, Y-axis: 900 mm Travel range, Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Gusdpfx Aezkapkshned Tool magazine: 30 slots Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Tool diameter with empty secondary position max.: 130 mm Total weight of all tools max.: 180 kg Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9 with a center distance of 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Operating hours (according to the latest service report) Operating hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT 5-axis machining with NC swivel milling head (B-axis) Linear drive in the X-axis

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Gedpfx Ahjxpww Asnoud Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21120N03100, Year of construction: 2024, operating hours: 696 h, load capacity: 1,000 kg, lifting height: 6,510 mm, free lift: 2,157 mm, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 1,000 kg Lifting height: 6,510 mm Overall height: 2,824 mm Free lift: 2,157 mm Fork profile: 80 mm x 40 mm Fork length: 1,200 mm Fork lowering stop: 30 mm MACHINE DETAILS Gjdpfx Ahozh Hgqsnsud Mast type: Full free-lift triplex mast Chassis width: 1,270 mm Load wheel polyurethane: 285 mm x 100 mm Drive wheel polyurethane: 360 mm x 130 mm Unladen weight: 2,433 kg Rated drive power: 6.5 kW Operating hours: 696 h EQUIPMENT Single-pedal control Color monitor Comfortable, air-suspended fabric seat Air-suspended and height-adjustable comfort driver's seat with fabric covering and innovative automatic weight adjustment for optimal suspension travel

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm Guodpfx Ahozh Dtbjnjd With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Input voltage: 400 V Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Condition: new, Year of construction: 2020, functionality: fully functional, power: 320 kW (435.08 HP), Brand new Mercedes-Benz OM 470 engine. Suitable for multiple cranes. Contact for price and other engines available. Gusdpfx Ahoxw R Dxonjd

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, saw blade diameter: 180 mm, milling spindle speed (max.): 20,000 rpm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Gsdpfxszgfvbj Ahnsud Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: not inspected (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, rotational speed (max.): 6,300 rpm, controller model: Siemens 810 DC powerline, Submitting a bid obligates you to collect the item on time, on July 30, 2026, at 1:00 PM! Technical data: ● Control system: Siemens 810 DC powerline ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & POWERED TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are powered) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. spindle speed approx.: 6300 RPM ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher Gusdpozlfcrsfx Ahnod ● 400 V / 50 Hz / 17 kVA ● Further technical data - see images Scope of delivery: ● Existing manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg

Condition: ready for operation (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed ca. 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 7.2 kW voltage 400 V weight 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine Gedpfx Ajxbh Eushnjud * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0294898, functionality: fully functional, operating hours: 20,000 h, pressing force: 100 t, ram plate length: 3,300 mm, total length: 3,800 mm, total height: 2,500 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Stroke length: 3,300 mm MACHINE DETAILS Gujdpfxezhlntj Ahnjd Operating hours: approx. 20,000 h Dimensions & Weight Machine dimensions (L x W x H): 3,800 x 2,000 x 2,500 mm Machine weight: 8,000 kg EQUIPMENT Tools

Condition: ready for operation (used), functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Gujdpfx Aszlivijhnjd Maximum punching force: 280 kN Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Machine weight: 15,800 kg

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Guodjdzqb Sopfx Ahnod Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm Gsdpjzk E A Asfx Ahneud MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 130 t, stroke length: 250 mm, controller model: Cybelec, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Frame width: 3,050 mm Stroke: 250 mm MACHINE DETAILS Control system: Cybelec Gujdpfx Ahszk E Aiened Dimensions & Weight Footprint: 4,000 x 2,000 x 3,000 mm Machine weight: 11,600 kg

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Guedsvtftqspfx Ahnsd Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pressing force: 80 t Gsdpfszk E Acjx Ahnjud Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg