Other

Kuntschar & Schlüter GTK 50 Blockheizkraftwerk

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Djdstxni Nopfx Akksuw Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Duodpfx Asdtdwaokkjw Outlet below

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Djdpfx Aotwqzrekkouw

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Djdpfx Akjvwfhiskouw

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,681 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 23,000 kg, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER 620 GS-NL (Complete Package) Available complete natural gas power plant based on Jenbacher 620 GS-NL, already dismantled and ready for loading. The unit was stopped while running properly at full load. Maintenance All maintenance has been performed by official services, following the manufacturer’s schedule. Premium shortblock: completed in 2018 (report available). Skid / generating set components: 2008. Borescope inspection: available. Technical data Brand: Jenbacher Model: 620 GS-NL Power: 3,044 kW Fuel: Natural Gas Frequency: 50 Hz Total running hours: 19,681 h Voltage: 6,300 V Scope of supply (included) Genset Gas train “Diane Blue” Silencer Oil system Refrigeration system Transformer Switch breakers Auxiliaries cabinet Dodpfx Aeytgxfekkjuw Status / Availability Availability: Immediate The assets are already dismantled in our warehouse, ready to be loaded or inspected. For more information please contact us!

Condition: excellent (used), functionality: fully functional, Buffer belt, stainless steel dryer 3-piece buffer belt Belt width: 1500 mm Stainless steel Length: approx. 17.5 meters Width: 2500 mm Height: 3050 mm Weight according to specification: approx. 8000 KG Dsdpfx Aewb Sqwekkjuw Elements under the belt are not included

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Dodpfx Aexc Ni Rjkkeuw

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 28727, DOUBLE-STROKE HEADER NATIONAL 61MS operational Machinery operational, fully functional. Revised in 2024 (mechanical and electrical parts) Available for any test c/o HBR srl Number of die: 1 Number of punches: 2 Pieces per min.: 400 Cutoff diameter: 6 mm. Cutoff length (min./max.): 10/52 mm. Kickout stroke-die (min./max.): 4.8/30 mm. Kickout stroke-punch (max.): 9.5 mm. Upset diameter: 14 mm. Quill diameter: 19 mm. Cutter insert diameter: 12 mm. Die diameter: 41 mm. Cone punch diameter: 32 mm. Finish punch diameter: 35 mm. Power of main motor: 15 KW Floor space (width): 1.340 mm. Floor space (length): 2.680 mm. Height: 1970 mm. Net weight: 4.700 kg. Dedpfx Aet Rp A Hokkeuw Gross weight: 5.400 kg.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Dusdpfx Aksfi Nmwsksw Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump -Max. Pressure: approx. 200 bar -Litre capacity: approx. 6 l/min Dodpeb Uhqdjfx Akkjuw -Hydraulic tank: liters -Hydraulic valve: -Dimensions: mm -Weight: 36kg