Collet chuck Tool holder

ISO SK 40 H 50 60 63 95 WE

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Gedsx Hgl Hspfx Ai Njuc Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Gujdpsxmaguefx Ai Noc Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m Guodowl Dptepfx Ai Nsc -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: ESS B2 - *M 0--.10*, Mobile starscreen on trolley Gujdpfx Ajirnrpji Njc Suitable for material: soil, compost, topsoil, wood chips, building rubble, bark mulch Weight: 2700 kg Grain size: 12 to 40 mm (according to material requirements) Power supply: 3 phases, 400V, current 32A, frequency 50Hz, total power 11,25kW throughput: 40 to 60 m³/h depending on material and grain size Delivery time after order approx. 14 weeks

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 Guedpfebn Amfsx Ai Nec T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Gedpfx Asvf E Avoi Njuc Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2010, condition: good (used), 2 SICON shredders Year 2010 The electrical cabinet is missing Price 15 000€ each Gusdpsiz Tm Isfx Ai Nec 4 densimetric tables : 8 000€ each

Condition: new, Year of construction: 2026, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center EDEL CYPORT CP 4030 Travels X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry passage Y/Z: 3.276 / 1.405 mm Rapid Traverse X/Y/Z 30/30/15 m/min 2-axis-NC-swivel head M-Series of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A100 Speed: 12,000 rpm Power: 42/53 kW (100%/40% ED) Torque: 200/253 Nm (100%/40% ED) Control: HEIDENHAIN TNC 640 HEIDENHAIN wireless electronic hand wheel incl. charging station 5-axis path control DXF-converter CAD-Viewer KinematicsOPT Energy efficiency certificate Remote Service Tool magazine: Number of pockets: 64 pcs. HSK-A100 max. tool diameter: 105/150 mm max. tool length: 300 mm max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank volume: 1,600 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Spray gun Chip conveyor Coolant-airblast-changeover Oil-Mist extration unit Work piece measuring, Touch probe BLUM TC 60 - radio controlled Tool measuring BLUM LaserControl Micro Single NT Working area coverage Safety light sensors Documentation CE-certification Gujdpfx Aioir Iczo Nsc Made in Germany

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Gjdpfx Asrx Rxtji Nouc Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch Gsdpfx Ajfv H Edei Njuc - Footswitch - 7 pcs. Roll sets